Purpose: to set the number of flashes for the “Comfort flashing” option.
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select” then click on “.46 – Central Conv.”.
4 – Click on“Adaptation – 10”.
5 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Blinkzyklen” or“Cycles de clignotement” or“Turn Signal Control – Freeway flashing cycles”.
6 – On this same page, there is a second drop-down menu at the bottom of the page.
On this menu, choose between“3” and“5” and confirm.
