Purpose: to disable spoiler operation. If you code the spoiler deployed or closed, it will be locked in the position after coding!
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition, then run the VCDS program.
Line 1:
3 – Click on “Select”, then click on “17 – Instrument”. 1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
4 – Click on“Coding – 07” then click on“Long Coding Helper”.
5 – Choose Byte 5:
Bit 1: Uncheck “Rear Spoiler Installed”.
Line 2:
3 – Click on ” Select” then click on ” 46 – Central Conv.
4 – Click on“Coding – 07” then click on“Long Coding Helper”.
5 – Choose Byte 6:
Bit 7: Uncheck “Rear Spoiler Installed”.
