Purpose: to change the Splash Screen of the MMI RMC.
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select” then click on“5F – Electr. information”.
4 – Click on “Coding – 07”.
5 – Click on “Long Coding Helper” .
6 – Select Byte 03
standard logo:
Bit 0 disabled
Bit 1 disabled
S-Line logo:
Bit 0 enabled
Bit 1 disabled
S logo:
Bit 0 disabled
Bit 1 enabled
RS logo:
Bit 0 enabled
Bit 1 enabled
