Purpose: Activates RS6 mode tail light animation (RS Tail Lights).
RS animation can only be activated if the car already has standard animation and the appropriate 8SQ High tail lights.
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition, then run the VCDS program.
Line 1:
3 – Click on “Select”, then click on “46 – Module Confort” . 2 – Switch on the ignition and run the VCDS program. Procedure: 1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
4 – Click on “Coding – 07” then “Long Coding Helper”
5 – Select Byte 37: (Bits 0, 1, 2 and 3 should already be set)
Check Bit 4 (SBBR_variant)
