Audi A6 C8 (4K) (2018+ ) / Audi S6 / RS6 / Allroad
A6 (C8) – ACC distance setting in MMI
Purpose: Displays the Adaptive Cruise Control (ACC) distance setting on the MMI MIB2. Procedure: 1 - Engine off, ignition off, connect your...
A6 (C8) – ACC driving profile selection on the MMI
Purpose: Activates the menu for manual selection of the Adaptive Cruise Control (ACC) driving program on the MMI. Low/Standard/Dynamic driving program selection....
A6 (C8) – Activate a second Bluetooth phone
Purpose: Allows you to connect two phones simultaneously via Bluetooth to the MMI if you don't have the Audi Phone Box option....
A6 (C8) – Activate Audi Lane Assist
Purpose: to activate Audi Lane Assist (for vehicles equipped with Pre-Sense). Active Lane Assist can only be coded to “always on” without...
A6 (C8) – Activate Audi Traffic Jam Assist
Purpose: activates Audi's Traffic Jam Assist (TJA) (with vehicle equipped with Pre-Sense). The Traffic Jam Assistant can take over steering at speeds...
A6 (C8) – Activate automatic parking brake
Purpose: to activate the automatic parking brake function. When the vehicle is parked, the parking brake is automatically applied, so you no...
A6 (C8) – Activate G-Meter
Purpose: Adds the G-Meter (Accelerometer) to the Virtual Cockpit screen. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM...
A6 (C8) – Activate lock with engine running
Purpose: locks the vehicle while the engine is running. This is useful for warming up the car, for example, in complete safety....
A6 (C8) – Activate MMI CD/DVD extraction
Purpose: activates the function for copying multimedia data (music, films, etc.), similar to the SD card function. Allows you to import/copy/load all...
A6 (C8) – Activate RS Monitor on the MMI
Purpose: to activate the RS Monitor on the MMI (MIB2+ MH2P or MIB3). The RS monitor replaces the “Vehicle details” tab, but...
A6 (C8) – Activate taillight animation in RS mode
Purpose: Activates RS6 mode tail light animation (RS Tail Lights). RS animation can only be activated if the car already has standard...
A6 (C8) – Activate trailer coupling (retrofit)
Purpose: Enables trailer / towbar retrofit. Please note! Adaptation in motor control unit 01 is not accepted for some models. In this...
A6 (C8) – Activate/deactivate daytime running lights (DRL) via MMI
Purpose: to activate/deactivate the daytime running lights (DRL) from the MMI. ATTENTION to your country's regulations and technical inspection for daytime running...
A6 (C8) – Audi Lane Assist settings
Purpose: Adjusts the lane departure warning's deactivation threshold for driver inactivity, the intensity of steering assistance, and the intensity of Audi Lane...
A6 (C8) – Audi Sound System volume control
Purpose: to adjust the volume of the engine sound (Audi Sound System - Soundaktor) inside the car. To mute the sound, use...
A6 (C8) – Comfort flashing light
Purpose: to set the number of flashes for the “Comfort flashing” option. Proceed : 1 - Engine off, ignition off, connect your...
A6 (C8) – Complete opening of sunroof with remote control
Purpose: Enables full opening of the sunroof when opening with the remote control. Procedure: 1 - Engine off, ignition off, connect your...
A6 (C8) – Configuring automatic locking in the MMI
Purpose: Activates the menu entry for using the lock function when driving via the MMI. By default, the vehicle locks the central...
A6 (C8) – Daytime running light deactivation (DRL) using handbrake
Purpose: to deactivate the daytime running lights (DRL) using the handbrake (Park EPB). Proceed : 1 - Engine off, ignition off, connect...
A6 (C8) – Deactivate automatic activation of front parking aid
Purpose: deactivates automatic activation of front parking aid (PDC) Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable...
A6 (C8) – Deactivate roller blind when locking/unlocking
Purpose: To deactivate the roller blind comfort function when locking/unlocking. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS...
A6 (C8) – Delete belt alarm
Purpose: to suppress the audible alarm and warning light in the Virtual Cockpit when driving without a seatbelt. Proceed : 1 -...
A6 (C8) – Disable AM frequency on MMI
Purpose: to deactivate the AM radio frequency on the MMI (AM radio frequency is rarely used, unlike FM radio frequency). Procedure: 1...
A6 (C8) – Disable Start & Stop
Purpose: to disable Start and Stop operation. Information: Start/Stop is inactive as long as the air-conditioning control is “on”. As soon as...
A6 (C8) – Easy Entry
Purpose: to activate the “Easy Entry” function for the driver's seat. By default, vehicles equipped with the electric steering column option automatically...
A6 (C8) – Electric tailgate opening delay setting with remote control
Purpose: Allows you to set the activation time for tailgate operation when you hold down the center button of the key and...
A6 (C8) – Enable automatic gear selection in Virtual Cockpit
Purpose : Displays automatic speed selection in mode D and S on the virtual cockpit display. Procedure: 1 - Engine off, ignition...
A6 (C8) – Heated seat settings
Purpose: Used to adjust the seat heating temperature, you can increase or decrease the heating level of all or part of the...
A6 (C8) – Heated steering wheel settings
Purpose: Allows you to adjust the temperature of the steering wheel heater. You can increase or decrease the heating level of all...
A6 (C8) – High Beam Assist activation
Purpose: activates High Beam Assist for vehicles with Sign Assist or Lane Assist option. Caution: Please use these instructions only on vehicles...
A6 (C8) – High Beam Assist always active
Purpose: automatically activates the high beam assistant on start-up if it was active before the ignition was switched off. (high beam assist)...
A6 (C8) – Lap Timer
Purpose: to add the stopwatch to the ODB/Virtual Cockpit. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS...
A6 (C8) – Lock/unlock confirmation (beeps)
Purpose: Enables vehicle lock/unlock confirmation with beeps. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to the...
A6 (C8) – Locking/unlocking confirmation (Flashing lights)
Purpose: Allows you to change the vehicle lock/unlock confirmation with the number of indicators. Procedure: 1 - Engine off, ignition off, connect...
A6 (C8) – Needle check
Purpose: to activate the scanning of the speedometer needles when the car is started. (Works with Virtual Cockpit) (Needle Sweep) Proceed :1...
A6 (C8) – Panel display on Virtual Cockpit
Purpose: displays speed limit signs in the Virtual Cockpit (Sign Assist). The vehicle must be equipped with Lane Assist. Warning! There are...
A6 (C8) – Rear lights activated with daytime running lights (DRL)
Purpose: to activate rear lights activated with daytime running lights (Scandinavian DRL). Proceed : 1 - Engine off, ignition off, connect your...
A6 (C8) – Reprogramming a new battery
Purpose: to reprogram / recode the new battery of all its data after replacement. Watch out! There are 4 lines of coding...
A6 (C8) – Speed of radar deactivation (or reversing camera)
Purpose: Selects the speed at which the radar and/or reversing camera are deactivated. Proceed : 1 - Engine off, ignition off, connect...
A6 (C8) – Suppress electric tailgate beeps
Purpose: to deactivate beeps when opening/closing the trunk/electric liftgate. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS...
A6 (C8) – Ventilated seat settings
Purpose: Allows you to fine-tune seat ventilation, you can increase or decrease all respective seat ventilation levels by up to 10% compared...
A6 (C8) – Wireless CarPlay activation
Purpose: Enables Apple CarPlay Wireless and Google Android Auto Wireless to be activated without the need for a USB cable. The vehicle...
