Purpose: to activate US nightlights with turn signals, for xenon headlights only.
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition, then run the VCDS program.
Line 1:
3 – Click on ” Select”, then click on ” Select ” and run the VCDS program.09 – Cent. Elect. ” .
4 – Click on “Coding – 07”.
5 – Select Byte 10 :
Bit 0: Check “ Turn signal active as Side marker”.
