Purpose: To configure Start&Stop operation.
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1 :
3 – Click on ” Select”, then click on “Select”.09 – Cent. Elect.” .
4 – Click on “Security Access – 16” then enter the code “20113”.
5 – Click on “Adaptation – 10”.
6 – Choose Channel 34
Enter new value according to desired options
–4 Start&Stop disabled by default
+32 Start&Stop status stored before ignition switch-off
+64 Reverse button light (on when Start&Stop enabled)
