Purpose: to add a menu for setting Active Lane Assist sensitivity in the MMI if the vehicle is equipped.
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select”, then click on“8E – Image Processing”.
4 – Click on“Security Access – 16” then enter the code“20103”.
5 – Click on“Adaptation – 10”. Then select “Menu for time of assisted steering” from the drop-down list.
Set value to “active
Restart MMI
