Purpose: to remember the function of the Audi Lane Assist. If you deactivate it, the Lane Assist will not automatically resume the next time you start up.
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostic socket or OBDeleven box.
2 – Switch on the ignition and run the VCDS program or the OBDeleven application.
Line 1:
3 – Click on“Select” then click on “.A5 – Frt Sens. Drv. Assist“.
4 – Click on“Security Access – 16” then enter the code“20103”.
5 – Click on “Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “IDE07596-Personalisierung Spurhalteassistent bei Kl. 15 ein “/”Personalization of lane dept. warning Cl. 15 on“
7 – On this same page, there is a second drop-down menu, but at the bottom
of the page.
On this menu, select“last setting ” and confirm.
