Purpose : displays automatic gear selection in D and S modes on the virtual cockpit screen.
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition, then run the VCDS program.
Line 1:
3 – Click on “Select”, then click on “02 – Auto Trans”. 1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
4 – Click on“Adaptation – 10”.
5 – Then select “Single Gear Display” from the drop-down list
Set value to “D on/S on
