Purpose: Allows you to select the lights to be used as daytime running lights (LED, fog lights…).
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition, then run the VCDS program.
Line 1:
3 – Click on ” Select”, then click on ” Select ” and run the VCDS program.09 – Cent. Elect.” .
4 – Click on “Coding – 07” then “Long Coding Helper”.
5 – Select Byte 2 :
Bit 1: Check “Daytime Running Lights via Front Side Marker Lights active” (to activate front turn signals)
Bit 2: Check “Daytime Running Lights via High Beams active” (to activate high beams)
Bit 3: Check “Daytime Running Lights via Fog Lights active” (to activate fog lights)
Bit 4: Check “Daytime Running Lights via DRL LEDs active” (to activate front LEDs)
Bit 6: Check “Daytime Running Lights via Side Marker Lights active” (to activate side marker lights)
Bit 7: Check “Daytime Running Lights via Tail Lights active” (to activate tail lights)
