Purpose: to enable Apple CarPlay Wireless and Google Android Auto Wireless and eliminate the need for a USB cable. (For A4 B9 Facelift)
The vehicle must have an enabled USB wired CarPlay connection (Audi Smartphone Interface) and a MIB2 Plus with MH2p system must be running firmware P2470 or higher (MH2p_ER_AUG35_P2470) or MIB3.
Before you start, disassociate/delete all Apple devices from CarPlay and Bluetooth (including deleting the car if already paired from the Apple device itself – settings/general/CarPlay).
Watch out! There are 8 lines of coding to do here.
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on ” Select ” and then click on “Select”.5F – Information Electr.” .
4 – Click on “Adaptation – 10”.
5 – Select Channel : “WLAN Settings – 5_ghz_wlan”.
Set value to “ON
Line 2:
3 – Click on ” Select “, then click on “Select”.5F – Information Electr.” .
4 – Click on “Adaptation – 10”.
5 – Choose Channel : “Smartphone configuration – Apple_car_play_wireless”.
Set value to “ON
Line 3:
3 – Click on “Select” then click on “.5F – Information Electr.” .
4 – Click on “Adaptation – 10”.
5 – Select Channel : “Smartphone configuration – Google_Android_auto_wireless”.
Set value to “ON
Line 4:
3 – Click on ” Select “, then click on “Select”.5F – Information Electr.” .
4 – Click on “Adaptation – 10”.
5 – Select Channel : “function_configuration_connectivity – Mirror_link”.
Set value to “ON
Line 5:
3 – Click on ” Select “, then click on “Select”.5F – Information Electr.” .
4 – Click on “Adaptation – 10”.
5 – Select Channel : “function_configuration_connectivity – WIFI_Hotspot_5GHz”.
Set value to “ON
Line 6:
3 – Click on ” Select”, then click on “Select”.75 – Telematics” .
4 – Click on “Adaptation – 10”.
5 – Select Channel : “Emergency call module and communication unit, configuration – WLAN 5GHz”.
Set value to “ON
Line 7:
3 – Click on ” Select”, then click on “Select”.75 – Telematics” .
4 – Click on “Adaptation – 10”.
5 – Choose Channel : “Smartphone configuration – Apple CarPlay Wireless”.
Set value to “ON
Line 8:
3 – Click on ” Select”, then click on “Select”.75 – Telematics” .
4 – Click on “Adaptation – 10”.
5 – Select Channel : “Smartphone configuration – Google Android auto Wireless”.
Set value to “ON
Restart MIB3, reset MMI (hold down volume control for at least 10-15 seconds)
Don’t plug your Apple device into the USB port!
Make sure the WIFI access point is enabled in the MMI settings.
On your iPhone under Settings -> Wi-Fi, your car should appear with ***_5GHZ.
Pair your Apple device with Bluetooth, it should now ask you if you want to activate CarPlay.
If not, delete the pairing, first connect to the car’s Wi-Fi from the Apple device, then retry pairing via Bluetooth.
