Purpose: Enables full opening of the sunroof when opening with the remote control.
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.Procedure: 1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
Line 1:
3 – Click on“Select”, then click on“CA – Open roof”.
4 – Click on“Security Access – 16” then enter the code“20103”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Position cible pour ouverture confort” /“Komfortfunktionen-Ziellage bei Komfortöffnen”.
7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, choose “Pos. couliss. “then validate.
