Purpose: Eliminates ODB error when replacing original license plate light bulbs with non-error LEDs.
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1 :
3 – Click on ” Select”, then click on “Select”.09 – Cent. Elect.” .
4 – Click on “Security Access – 16” then enter the code “16017”.
5 – Click on “Adaptation – 10” then“Long Coding Helper”.
6 – Select Channel 192 :
Remove 1 from the existing value.