Purpose: to maintain LED intensity with indicators.
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
For A4 B8 Phase 1 :
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on “Coding – 07” then click on “Long Coding Helper”.
5 – Select Byte 3 :
Bit 7: Uncheck “Daytime Running Lights inactive with Turn Signal (” Winking “) active”
For A4 B8 Facelift :
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“20113”.
5 – Click on“Adaptation – 10”.
Canal 03 (Heading Wink Brightness)
Set the value to 88 (default value: 26)
