Purpose: to configure LED taillights after retrofitting.
Procedure :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1 :
3 – Click on“Select” then click on“46- Central Conv.
4 – Click on “Security Access – 16” then enter the code “16017”.
5 – Click on “Adaptation – 10”.
6 – Choose :
- Channel 181:
Set value to 64608
- Channel 189 :
Set value to 16380
- Channel 191 :
Set value to 16383
- Channel 195 :
Set value to 5123
- Channel 196 :
Set value to 5155
- Channel 197 :
Set value 5124
- Channel 198 :
Set value 5156
- Channel 203 :
Set value 73
- Channel 204 :
Set value 105
