Purpose: to modify the brightness, contrast, saturation and temperature of the rear camera image.
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1 :
3 – Click on“Select“, then click on“6C – Rear View Camera“.
4 – Click on“Security Access – 16” then enter the code“22351“.
5 – Click on“Adaptation – 10“.
6 – Select channel to modify :
Channel 10 (Brightness)
Select a value between 1 and 100 (default: 50)
Channel 11 (Contrast)
Select a value between 1 and 100 (default: 50)
Channel 12 (Saturation)
Select a value between 1 and 100 (default: 50)
Channel 13 (Temperature)
Select a value between 1 and 100 (default: 50)
