Purpose: To activate Audi Drive Select Individual and its management via the MMI.
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Procedure: 1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
Line 1:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Coding – 07” then click on“Long Coding Helper” .
5 – Select Byte 7:
Bit 5: Check “Drive Select installed”.
Then Byte 8:
Bit 1: Check “Enable Steering in ADS” (Activate Dynamic steering)
Bit 2: Check “Enable Engine in ADS Menu” (Activate engine/gearbox)
Bit 3: Check “Enable Suspension in ADS Menu” (Activate controlled damping if fitted!))
Bit 4 : Enable Steering in ADS Menu
Bit 5 : Enable Sport Differential in ADS Menu
Then Byte 17:
Bit 7: Check box
Line 2:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on “Security Access – 16” then enter the code “20113”.
4 – Click on“Adaptation – 10”.
5 – Select Channel 63 / 64 / 65 / 66
Set value 4 ( Individual) to all channels.
Step 2: Activate the MMI menu
For MMI Basic Plus
[07 – Control Head] -> [Adaptation -10] -> Channel 01
Add 32 to the existing value
For MMI 2G
The hidden menu must be activated (see: Activating the MMI 2G hidden menu ).
Launch the Hidden Menu by pressing SETUP + CAR (for 6s)
DIAG SETTINGS -> Car Menu Maske -> Charisma -> Check box
Don’t forget to validate the changes by selecting “Accept changes”.
For MMI 3G
The hidden menu must be activated (see: Activating the MMI 3G hidden menu ).
Launch the Hidden Menu by pressing SETUP + CAR (for 6s)
car -> carmenuoperation -> charisma-> select “5”.
Press “Return
car -> cardevicelist -> charisma -> check box
Reboot the MMI by pressing SETUP + Wheel + Top Right Button.