Purpose : to display the speed limit on the RNS-E navigation screen.
ATTENTION: requires RNS-E version 193
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1 :
3 – Click on “Select”, then click on“37 – Navigation”.
4– Click on“Adaptation – 10”.
5 – Select Channel 17 (Speed Display) then set the value according to the desired display.
Set the value according to the desired display
0– no option (display disabled)
1– option on, off (speed display)
2– option on, off, 5km/h, 10km/h, 15km/h, 20km/h (speed display + overrun warning)
Don’t forget to restart the RNS-E, by pressing the power button for more than 40s.
