Purpose: to activate an alarm with horn in the event of intrusion into the vehicle, and to lock the vehicle if the door is opened.
Warning! There are 8 lines of coding to do here.
For vehicles without original alarm!
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Additional functions – Signalhorn ohne KL 15”.
7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select“active” and confirm.
Line 2:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Anti-theft protection – Akustischer Alarm Signalhorn”.
7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select“active” and confirm.
Line 3:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Anti-theft protection – Alarmsignal”.
7 – On the same page, you’ll find a second drop-down menu at the bottom
of the page.
On this menu, select“frequency modulated” and confirm.
Line 4:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Anti-theft protection – DWA Alarmverzoegerung”.
7 – On this same page, there’s a second drop-down menu at the bottom
of the page.
On this menu, select“driver door contact thatcham” and confirm.
Line 5:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Anti-theft protection – DWA Camper Modus”.
7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select“active” and confirm.
Line 6:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Protection antivol – Sirenen Alarmzahl”.
7 – On the same page, you’ll find a second drop-down menu at the bottom
of the page.
On this menu, select“10 alarms” and confirm.
Line 7:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Protection antivol – Verzoegerung Panikalarm”.
7 – On the same page, you’ll find a second drop-down menu at the bottom
of the page.
Select“2 sekunden verzoegerung” and confirm.
Line 8:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Anti-theft Alarm System” Anti-theft Alarm System
7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select“active” and confirm.
