Purpose : activates xenon light kinematics when the vehicle is started. (DLA presentation)
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition, then run the VCDS program.
Line 1:
3 – Click on “Select”, then click on “55 – Headlight range”. Procedure: 1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
4 – Click on“Security Access – 16” then enter the code“20103”
5 – Click on “Adaptation – 10”.
6 – Select the “Presentation mode” in the value list
7 – Select “active” in the second list
