Purpose: Configures rear LED indicators in phase opposition. (Outside and inside turn signals light up alternately, Pace Car Lights)
Warning! There are 2 lines of coding to do here. (A3 Phase 1 only)
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to
the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte 16BLK SLB35BLK SL KC9-Lichtfunktion A 16”.
7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select“Blinken Links Dunkelphase” and confirm. (Origin : Blinken Links Hellphase)
Line 2:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on “Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte 17TFL R BLK SRB3TFL R BLK SR KC3-Lichtfunktion A 17”.
7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
On this, choose“Blinken Retchs Dunkelphase” and confirm. (Origin: Blinken Retchs Hellphase)