Purpose: to change the start-up logo displayed on the ODB (On-Board Computer).
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on “Select”, then click on “17- Instruments”.
4 – Click on “Coding – 07”.
5 – Click on “Long Coding Helper” .
6 – Byte 9:
Bit 0-2: Select the value according to the selected display:
00 – No logo
01 – S3 logo
02 – G-Tron logo
03 – E-Tron logo
04 – RS3 logo
05 – TCNG logo