Purpose: Displays the amount of fuel used since refueling on the ODB/Virtual Cockpit.
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select”, then click on“17 – Instruments”.
4 – Click on“Coding – 07” then click on“Long Coding Helper”.
5 – Select byte“10”
Then check Bit“4”: “Volume to Be Replenished”.
If it’s a hidden bit, replace the 0 with a 1 in“Binary”.
