Purpose : to activate the multifunction steering wheel for retrofitting.
Warning! There are 8 lines of coding to do here.
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition, then run the VCDS program.
Line 1:
3 – Click on “Select”, then click on“16 – Multifunction steering wheel” . 1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
4 – Click on“Coding – 07” then click on“Long Coding Helper”
5 – Choose byte“00”
Then check Bit“1” (not mandatory)
Line 2:
3 – Click on ” Select”, then click on “Select”.17 – Instruments“.
4 – Click on“Coding – 07” then click on“Long Coding Helper”
5 – Choose byte“10”
Then tick Bit“7”.
Line 3:
3 – Click on ” Select”, then click on “Select”.19 – CAN Gateway“.
4 – Click on“Coding – 07” then click on“Long Coding Helper”
5 – Choose byte“1”
Then tick Bit“0”.
Line 4:
3 – Click on“Select” then click on “.5F – Information Electr.”.
4 – Click on“Security Access – 16” then enter the code“20103”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“vehicle function list CAN-MFL”.
7 – On this same page, there is a second drop-down menu at the bottom of the page.
On this menu, select“available” and confirm.
Line 5:
3 – Click on“Select” then click on “.5F – Information Electr.”.
4 – Click on“Security Access – 16” then enter the code“20103”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“vehicle function list BAP-MFL_0x0F”.
7 – On this same page, there is a second drop-down menu at the bottom of the page.
On this menu, select“activated” and confirm.
Line 6:
3 – Click on“Select” then click on “.5F – Information Electr.”.
4 – Click on“Security Access – 16” then enter the code“20103”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“vehicle function list BAP-MFL_Jocker_0x34”.
7 – On this same page, there is a second drop-down menu at the bottom of the page.
On this menu, select“activated” and confirm.
Line 7:
3 – Click on“Select” then click on “.5F – Information Electr.”.
4 – Click on“Security Access – 16” then enter the code“20103”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Vehicle menu operation-menu_display_MFL_jocker”.
7 – On this same page, there is a second drop-down menu at the bottom of the page.
On this menu, select“activated” and confirm.
Line 8:
3 – Click on“Select” then click on “.5F – Information Electr.”.
4 – Click on“Security Access – 16” then enter the code“20103”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Vehicle menu operation-menu_display_MFL_jocker_over_treshold_high”.
7 – On this same page, there is a second drop-down menu at the bottom of the page.
On this menu, select“activated” and confirm.