Purpose: activates ambient lighting and menu on MMI (after wiring and lighting of floor stand and/or door for retrofitting).
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Coding for the MMI ambient lighting menu :
Line 1:
3 – Click on“Select” then click on“5F – Electr. information”.
4 – Click on“Security Access – 16” then enter the code“20103”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Vehicle function list BAP-interieur_light_0x08“.
7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“active” and confirm.
Line 2:
3 – Click on“Select” then click on“5F – Electr. information”.
4 – Click on“Security Access – 16” then enter the code“20103”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Vehicle menu operation-menu_display_ambient_illumination“.
7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“active” and confirm.
Line 3:
3 – Click on“Select” then click on“5F – Electr. information”.
4 – Click on“Security Access – 16” then enter the code“20103”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Vehicle menu operation-menu_display_ambient_illumination_over_threshold_high“.
7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“active” and confirm.
Restart MMI
Line 4:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Interior light, light configuration- Ambiente_Applikationsleisten_in_Tuertafel“.
7 – On the same page, you’ll find a second drop-down menu at the bottom
of the page.
On this menu, select“Installed” and confirm.
Line 5:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Interior light, light configuration- Ambiente_Lautsprecher“
7 – On the same page, you’ll find a second drop-down menu at the bottom
of the page.
On this menu, select“Installed” and confirm.
Line 6:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Interior light, light configuration- Fussraumbeleuchtung“
7 – On the same page, you’ll find a second drop-down menu at the bottom
of the page.
On this menu, select“Installed” and confirm.
Coding for foot/floor light :
Line 1:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Int. light, 2nd generation : Defaultwert Ambienteprofil Fussraum“
7 – On this same page, there is a second drop-down menu, but at the bottom
of the page.
On this menu, select”100″ and confirm.
Line 2:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte30FR LC72 – Lichtfunktion A 30“.
7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select“Footwell Light” and confirm.
Line 3:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte30FR LC72 – Dimmwert AB 30“.
7 – On this same page, there is a second drop-down menu, but at the bottom
of the page.
On this menu, select”100″ and confirm.
Line 4:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on “Coding – 07”.
5 – Click on “Long Coding Helper” .
6 – Select Byte 5
Set bit 7 “Footwell Lights Installed
Coding for Door Light :
Line 1:
3 – Click on“Select” then click on“42-Driver door“.
4 – Click on“Coding – 07“.
5 – Select byte 01 and check bit 1 “Ambient Lighting installed”.
Line 2:
3 – Click on“Select”, then click on“52 – Passenger door“.
4 – Click on“Coding – 07“.
5 – Select byte 01 and check bit 1 “Ambient Lighting installed”.
