Purpose: to activate Hill Hold Control.
Hill Hold Control maintains brake pressure for a few seconds after prolonged application of the brake pedal. (For after 2010)
Procedure :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1 :
3 – Click on“Select” then click on“03 – Brains ABS” (or“03 – ABS Brakes ”).
4 – Click on“Codage- 07” then“Long Coding Helper”.
Byte 16 :
Bit 3 (or 0 depending on model): Check “Hill Hold Control (HHC/PR-UG1/UG4) active/installed”.
Line 2 Hill Hold Control setting.
3 – Click on“Select” then click on“03 – Brains ABS” (or“03 – ABS Brakes ”).
4 – Click on“Adaptation – 10”.
Select Channel 58 (Hill Hold Control (HHC) from the drop-down list)
Choose a value
0 “normal”
1 “earlier” (restarts with lower acceleration)
2 “later” (restarts with higher acceleration)
