Purpose: to activate the gear display on the on-board computer (for manual gearboxes).
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on “Select”, then click on “17 – Instruments”.
4 – Click on ” 10 – Adaptation
5 – Select Channel 36 “Special Functions”
Add +1 to the existing value as specified in the tooltip (?xx).
Example: original value 000: change to 100
So excluding S/RS, the only possible value is: 100
