Purpose: Allows the rear fog lamps to be used when reversing, giving more light and safety when maneuvering in the dark.
Modification only possible for vehicles with a 30-byte module.
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1 :
3 – Click on “Select” then click on “09 – Cent. Elect.” .
4 – Click on “Coding 07”.
5 – Select the “0” module and click on “Long Coding Helper”:
6 – Byte 26:
Check Bit 6
