Purpose: To suppress the audible alarm and the warning light on the speedometer when driving without a seatbelt.
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition, then run the VCDS program.
Line 1:
3 – Click on “Select”, then click on“17 – Instruments” . 1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
4 – Click on“Coding 07” .
5 – The first two digits of the code (??xxx) are used to modify the Instrument module options. To suppress the belt alarm, subtract 02 from these digits.
In the above example, the initial coding (with belt alarm) is: 07232
To delete the belt alarm, simply recode as follows: 05232 (07 – 02 = 05)
To activate the belt indicator: +02
