Purpose: Enables the gauge faces and counter needles to be illuminated as soon as the ignition is switched on (after 2002).
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select”, then click on“17 – instruments”.
4 – Click on“Adaptation – 10” then click on“Channel 19”.
5 – Add +1 (for gauges) and/or +2 (for needles) (so +3 for both) for the first digit (?xxxx)
