Audi A1 GB (2019+ )
A1 (GB) – 120 km/h overtaking alert
Purpose: To activate or deactivate a message reminding you that you are exceeding the 120km/h speed limit. Procedure: 1 - Engine off,...
A1 (GB) – Activate a second Bluetooth phone
Purpose: Allows you to connect two phones simultaneously via Bluetooth to the MMI if you don't have the Audi Phone Box option....
A1 (GB) – Activate daytime running lights (DRL) only in Auto position
Purpose: to activate daytime running lights (DRL) only when the headlight control knob is in the auto position. Proceed : 1 -...
A1 (GB) – Activate intruder alarm with horn
Purpose: to activate an alarm with horn in the event of intrusion into the vehicle, and to lock the vehicle if the...
A1 (GB) – Activate Lane Assist memory function
Purpose: to store the Lane Assist function in memory. If you deactivate it, the Lane Assist will not automatically resume the next...
A1 (GB) – Activate window operation with ignition off
Purpose: activates window operation (close/open) with ignition off and door open. Proceed : 1 - Engine off, ignition off, connect your official...
A1 (GB) – Activate/deactivate daytime running lights (DRL) via MMI
Purpose: to activate/deactivate the daytime running lights (DRL) via the MMI in the CAR menu. ATTENTION to your country's regulations and technical...
A1 (GB) – Activation of progressive interior lighting
Purpose: turns interior lights (door knobs, dashboard, center console) on and off gradually. By default, interior lights are switched on and off...
A1 (GB) – Adjust Soundaktor volume
Purpose: to adjust/deactivate the volume of the Soundaktor (speaker built into the windscreen bay to simulate a false engine noise). If you...
A1 (GB) – Automatic door unlocking with DSG in “P” position
Purpose: automatically unlocks all doors when the DSG automatic gearbox is shifted to “P”. Procedure: 1- Engine off, ignition off, connect your...
A1 (GB) – Automatic window closing when locked
Purpose: automatically closes the windows when the car is locked. A new menu will be activated in door settings to deactivate the...
A1 (GB) – Comfort flashing light
Purpose: to set the number of flashes for the “Comfort flashing” option. Proceed : 1 - Engine off, ignition off, connect your...
A1 (GB) – Daytime running light deactivation (DRL) using the handbrake
Purpose: to deactivate the daytime running lights (DRL) using the handbrake. Proceed : 1 - Engine off, ignition off, connect your official...
A1 (GB) – Deactivate “Switch on low beam” message
Purpose: to deactivate the low beam warning message/dialogue when the headlight switch is in position 0. Proceed : 1 - Engine off,...
A1 (GB) – Deactivate horn without contact
Purpose: deactivates or activates the horn when the ignition is off. Proceed : 1 - Engine off, ignition off, connect your official...
A1 (GB) – Deactivate open door alarm with contact
Purpose: to deactivate the alarm which is triggered when the door is opened and the contact is in position P. Procedure: 1...
A1 (GB) – Deactivate right-hand overtaking prevention
Purpose: to deactivate the ACC lane assist system, e.g. when on the freeway and there is a traffic jam in the left...
A1 (GB) – Deactivation of Audi Parking System engagement beep
Purpose: deactivates the beep when the Audi Parking System is engaged. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM...
A1 (GB) – Delete belt alarm
Purpose: to suppress the audible alarm and warning light in the Virtual Cockpit when driving without a seatbelt. Proceed : 1 -...
A1 (GB) – Disable AM frequency on MMI
Purpose: to deactivate the AM radio frequency on the MMI (AM radio frequency is rarely used, unlike FM radio frequency). Procedure: 1...
A1 (GB) – Disable rear wiper when reversing
Purpose: deactivates or reverses the rear wiper when reverse gear is engaged. Proceed : 1 - Engine off, ignition off, connect your...
A1 (GB) – Door lock/unlock confirmation (beep/horn)
Purpose: Used to set door lock confirmation with beep (alarm) or horn. Attention! There are 5 lines of coding here, see 6....
A1 (GB) – Electronic differential lock (XDS)
Purpose: to set the electronic differential lock (XDS) The Electronic Differential Lock (XDS) is an extension of the familiar EDS function.XDS does...
A1 (GB) – Hill Start Assist
Purpose: to set Hill Start Assist operation. (hill-start assist) Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS...
A1 (GB) – Increase gas pedal sensitivity
Purpose: to increase accelerator pedal sensitivity. (better acceleration response with DSG, more significant than with manual). Proceed : 1 - Engine off,...
A1 (GB) – Key operation even with ignition on
Purpose: Allows you to use the key and lock the vehicle with the ignition switched on or the engine running. (Very practical...
A1 (GB) – KEYLESS GO automatic keyless entry
Purpose: automatically locks the vehicle when you leave it with the key, provided KEYLESS Go (keyless entry/locking and starting system) is installed....
A1 (GB) – Lap Timer
Purpose: to add the stopwatch to the Virtual Cockpit. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS...
A1 (GB) – Light Assist always active
Purpose: automatically activates the high beam assistant on start-up if it was active before the ignition was switched off. (High Beam Assist)...
A1 (GB) – Mirror folding adjustment with remote control
Purpose: to set the mirror folding option via remote control when locking the vehicle. The vehicle must be equipped with the “Electrically...
A1 (GB) – Modify warning thresholds for icy conditions
Goal: Select the outdoor temperature value for icy conditions for which the warning is displayed on the dashboard. (Ice Warning) Proceed :...
A1 (GB) – Needle check
Purpose: to activate the scanning of the speedometer needles when the car is started. (Works with Virtual Cockpit) (Needle Sweep) Proceed :1...
A1 (GB) – Oil temperature on Virtual Cockpit
Purpose: to display oil temperature on the Virtual Cockpit. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS...
A1 (GB) – Panel display on the Virtual Cockpit
Purpose: displays speed limit signs in the Virtual Cockpit (Sign Assist). Vehicle must be equipped with 3Q0 camera Warning! There are 9...
A1 (GB) – Rear lights activated with daytime running lights (DRL)
Purpose: activates rear lights activated with daytime running lights (Scandinavian DRL) (This method activates the dashboard lighting) Proceed : 1 - Engine...
A1 (GB) – Reprogramming a new battery
Purpose: to reprogram / recode the new battery of all its data after replacement. Watch out! There are 4 lines of coding...
A1 (GB) – Set ACC control in 1 km/h increments
Purpose: to adjust the ACC distance setting from the factory setting so that it can be set in 1 km/h increments by...
A1 (GB) – Speed of radar deactivation (or reversing camera)
Purpose: Selects the speed at which the radar and/or reversing camera are deactivated. Proceed : 1 - Engine off, ignition off, connect...
A1 (GB) – Start/Stop deactivation
Purpose: to disable Start and Stop completely. NOTE: No longer works if the 10th digit of your chassis number is “L” (A1...
A1 (GB) – Top-up quantity display on Virtual Cockpit
Purpose: to display the amount of fuel used since refuelling on the Virtual Cockpit. Proceed : 1 - Engine off, ignition off,...
A1 (GB) – Wireless CarPlay activation
Purpose: Enables Apple CarPlay Wireless and Google Android Auto Wireless to be activated without the need for a USB cable. The vehicle...
