Purpose: to activate the rear lights as daytime running lights at the same time as the front TFL LEDs (Scandinavian DRL).
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition, then run the VCDS program.
Line 1:
3 – Click on ” Select”, then click on ” Select ” and run the VCDS program.09 – Cent. Elect.” .
4 – Click on “Coding – 07”.
5 – Select Byte 18 :
Check Bit 0
Halogen: 6D or binary by 01101101.