Purpose: to deactivate the Start and Stop indicator in the ODB (On-Board Computer).
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on “Select”, then click on “17- Instruments”.
4 – Click on “Adaptation – 10”.
5 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Start/Stop indicator ”
6 – On this same page, there is a second drop-down menu, but towards the bottom
of the page.
On this, choose “Off” then validate.
