Vehicles affected include, in particular:

• Audi A1 — 2011–2018
• Audi A4 — 2013–2017
• Audi A5 — 2009–2018
• Audi Q3 — 2015–2019
• Audi Q5 — 2013–2018
• Audi Q7 — 2013–2018
• Audi A6 — 2012–2016
• Audi A7 — 2012–2016
• Audi A8 — 2011–2019

–> Check out the tutorials titled “Enable Hidden MMI Menu…” using VCDS for each Audi model

–> To access the Audi Red Engineering menu

WARNING: We are not responsible for any consequences these changes may cause… Try this at your own risk.

Start by downloading the file available for free here from VAG Custom:

1. Next, extract the file you just downloaded: MMI 3G 3GP Activation Hidden Menu.zip

2. Format an SD card to the FAT32 file system.

3. Copy the contents to the root directory of the SD card.

4. Start your AUDI and let the MMI boot up; this takes a few seconds.

5. Turn off Bluetooth on your smartphone if it is connected to the MMi, and remove all your SD cards (SD1 & SD2)…

6. Next, insert the SD card you prepared earlier into the SD1 slot.

7. You’ll see green text asking you to turn the large dial on your MMi center console; the message will then disappear.

8. Wait a few moments. A new message will appear stating that everything went well and that the hidden menu has been successfully enabled.

9. Restart the MMi using the button combination specific to your Audi.

Source: idevx

L’article Enabling the Hidden Menu for Audi MMI 3G and 3G+ est apparu en premier sur VAG Coding.

Audi – How do I access the Red Engineering Menu?

The Red Engineering Menu, also known as the Red Engineering Menu (REM) or Engineering Menu, is a hidden technical menu found on various generations of Audi multimedia systems.

In particular, it allows you to view detailed information about the multimedia system, its software and hardware versions, and various technical features.

The method for accessing the red Engineering menu depends on the generation and exact part number of the MMI.

Warning: Some of the functions in this menu are intended for technical operations. Do not change any settings unless you know exactly what they do.

How do you identify your MMI?

Before following these steps, it is important to correctly identify the multimedia system installed in your Audi.

The simplest way is to check the system’s version information.

Depending on the generation of your MMI, you may find the following part numbers, among others:

Below you will find the different generations of MMI, the part numbers used to identify them, and the corresponding Audi models and model years.

The model years listed correspond to the compatibility information provided for the various MMI systems. A single vehicle generation may be equipped with multiple multimedia systems depending on the model year, trim level, and equipment.

Key combinations

Once you have identified your multimedia system, the key combination used to access the red Engineering menu depends on the MMI generation.

The different combinations are shown in the image below.

In older cars (primarily those manufactured before 2016), you can use one of the keyboard shortcuts below to access the red engineering menu.

Use only the combination that corresponds to your MMI.

If you don’t know your system’s generation, refer to the various references and photos provided later in this tutorial.

MMI 2G

Reference / Software:

XX-XX XX.XX XXXX

Vehicles affected include, in particular,

• Audi A4 — 2009–2010
• Audi A5 — 2008–2009
• Audi A6 — 2005–2009
• Audi A8 — 2002–2011
• Audi Q7 — 2007–2009
• Audi RS6 — 2008–2011

Identify the 2G MMI

The MMI 2G is one of the first generations of Audi multimedia systems.

Check the version displayed in the system information and compare it with the image below to verify your system.

MMI 3G Basic / Low

Reference / Software:

BNav_XX_XXXXX

Vehicles affected include, in particular,

• Audi A4 — 2010–2013
• Audi A6 — 2009–2012
• Audi Q5 — 2009–2013
• Audi Q7 — 2009–2012

Identify the MMI 3G Basic / Low

The MMI 3G Basic / Low can be identified by a software version that begins with BNav_.

Compare the part number displayed on your MMI with the photo below to verify your system.

MMI 3G High

Reference / Software:

HNav_XX_XXXXX

Vehicles affected include, in particular,

• Audi A4 — 2010–2013
• Audi A5 — 2010–2013
• Audi Q5 — 2010–2013
• Audi Q7 — 2010–2013
• Audi A8 — 2009–2010

Identify the MMI 3G High

The MMI 3G High typically uses a software version that begins with HNav_.

Check the version displayed in the system information and compare it with the image shown below.

MMI 3G+

Reference / Software:

HN+_XX_XXXXX

or

HN+R

Vehicles affected include, in particular,

• Audi A1 — 2011–2018
• Audi A4 — 2013–2017
• Audi A5 — 2009–2018
• Audi Q3 — 2015–2019
• Audi Q5 — 2013–2018
• Audi Q7 — 2013–2018
• Audi A6 — 2012–2016
• Audi A7 — 2012–2016
• Audi A8 — 2011–2019

Identify the 3G+ MMI

The MMI 3G+ can be identified by the software part numbers HN+_ or HN+R.

This generation is an evolution of the MMI 3G and is featured in many Audi models from that period.

Compare your software version with the image below.

MMI RMC

Reference / Software:

RMC_XX_XXXXX

Vehicles affected include, in particular,

• Audi A1 — 2010–2018
• Audi A3 — 2013–2018
• Audi A6 — 2011–2017
• Audi A7 — 2010–2017
• Audi Q3 — 2011–2018

Identify the RMC MMI

The RMC MMI can be easily identified by a software version that begins with RMC_.

Check your system’s version information and compare it with the image below.

–> MMI RMC Software Update (fixes Bluetooth issue)

MMI MIB1

Reference / Software:

MHIG_XX_XXXX

Vehicles affected include, among others,

• Audi A3 — 2013–2017

Identify the MMI MIB1

In particular, the MIB1 can be identified by a software version that begins with MHIG_.

Compare your part number with the photo below to verify your system.

MMI MSTD

Reference / Software:

MSTD_XX_XXXX

Vehicles affected include, among others,

• Audi A3

Identify the MMI MSTD

The MSTD is one of the systems based on the MIB architecture.

The MSTD_ software reference number is one way to identify it.

Compare your part number with the photo below to verify your system.

MMI MIB2

Reference / Software:

MHI2_XX_XXXX

Vehicles affected include, in particular,

• Audi A4 — 2017–2019
• Audi A6 — 2017–2019
• Audi A7 — 2017–2019
• Audi A8 — 2018–2019

Identify the MMI MIB2

The MIB2 can be identified, among other things, by a software reference number beginning with MHI2_.

Check the software version displayed in the system information and compare it with the image below.

MMI MIB2 High – MHI2Q

Reference / Software:

MHI2Q_XX_XXXX

Identify the MMI MHI2Q

The MHI2Q is a variant of the MIB2.

The reference MHI2Q_ is used to identify it in the version information.

Compare your part number with the photo below to verify your system.

MMI MIB2 – MHS2

Reference / Software:

MHS2_XX_XXX

Identify the MHS2 MMI

Some MIB2 units use the MHS2_ prefix.

Checking the software version confirms the system generation before running the procedure.

Compare your part number with the photo below to verify your system.

MMI MIB2 – MH2p

Reference / Software:

MH2p_XX_XXX

Identify the MH2p MMI

Units with the MH2p_ designation belong to a different generation of MIB2 units.

As with other systems, always check the reference number listed in the version information before following the procedure.

Compare your part number with the photo below to verify your system.

What is the red “Engineering” menu used for?

Depending on the system generation, the Red Engineering Menu provides access to various technical information and functions.

In particular, it can be used to:

• check the firmware version;
• view the MMI’s hardware information;
• identify the various components of the system;
• view certain system information;
• access certain technical features;
• perform certain maintenance tasks;
• Review useful information before updating the system.

The available features may vary significantly from one generation of MMI to another.

Red Menu and Green Menu: What’s the Difference?

Be careful not to confuse the red Engineering menu with the hidden green menu.

The green menu provides access to various settings and hidden functions in the MMI.

The red Engineering menu is primarily intended for technical information, diagnostics, and certain maintenance tasks.

If the hidden menu on your MMI isn’t enabled yet, check out our dedicated tutorial:

→ Enable the hidden green menu on Audi

Important: Before making any changes

The Engineering menu provides access to functions that are not normally intended for everyday use.

Never change a setting at random.

Be especially careful with functions related to:

• the firmware;
• the bootloader;
• updates;
• the file system;
• hardware settings.

Improper handling or interrupting a software operation may cause the MMI to malfunction.

Important

The procedures presented on VAG Coding must always be tailored to the vehicle model, model year, MMI generation, system part number, and software version.

Two Audi vehicles from the same generation may sometimes be equipped with different multimedia systems.

Be sure to always identify your MMI before following a procedure.

Not sure which MMI you have?

Compare the software version displayed on your MMI with the various reference numbers and photos shown in this tutorial.

If you are unable to identify your system:

• Your Audi model
• the vehicle’s model year
• the MMI reference
• the software version displayed in the system information.

This will make it easier for you to determine which procedure for accessing the Engineering menu applies to your system.

L’article Access the Audi Red Engineering menu est apparu en premier sur VAG Coding.

Purpose: Activates the green hidden menu (green menu, hidden menu, testmode, engineer mode) on MIB2.

/!\ Caution: Making certain changes in the hidden menu may cause MIB2 to freeze or no longer start /!\


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select” then click on“5F – Electr. information”.

4 – Click on“Security Access – 16” then enter the code“S12345“.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Developer mode“.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, choose the value“activated“.

Restart MIB2, keep MENU button pressed until testmode menu appears

L’article Toledo (NH) – Activate hidden menu est apparu en premier sur VAG Coding.

Purpose: Activates the green hidden menu (green menu, hidden menu, testmode, engineer mode) on Discover MIB2.

/!\ Caution: Making certain changes in the hidden menu may cause MIB2 to freeze or no longer start /!\

For model Facelift (radio screen like Golf 7).


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select” then click on“5F – Electr. information”.

4 – Click on“Security Access – 16” then enter the code“S12345“.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Developer mode“.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, choose the value“activated“.

Restart MIB2, keep MENU button pressed until testmode menu appears

L’article Yeti (5L) – Activate hidden menu Amundsen est apparu en premier sur VAG Coding.

Purpose: Activates the green hidden menu (green menu, hidden menu, testmode, engineer mode) on MIB2.

/!\ Caution: Making certain changes in the hidden menu may cause MIB2 to freeze or no longer start /!\


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select” then click on“5F – Electr. information”.

4 – Click on“Security Access – 16” then enter the code“S12345”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Developer mode”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, choose the value“activated”.

Restart MIB2, keep MENU button pressed until testmode menu appears

L’article Ibiza (6P) – Activate hidden menu est apparu en premier sur VAG Coding.

Purpose: Activates the green hidden menu (green menu, hidden menu, testmode, engineer mode) on Discover MIB2.

/!\ Caution: Making certain changes in the hidden menu may cause MIB2 to freeze or no longer start /!\


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select” then click on“5F – Electr. information”.

4 – Click on“Security Access – 16” then enter the code“S12345”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Developer mode”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, choose the value“activated”.

Restart MIB2, keep MENU button pressed until testmode menu appears

L’article Transporter (T6) – Activate the Discover hidden menu est apparu en premier sur VAG Coding.

Purpose: Activates the green hidden menu (green menu, hidden menu, testmode, engineer mode) on Discover MIB2.

/!\ Caution: Making certain changes in the hidden menu may cause MIB2 to freeze or no longer start /!\

For Amarok Facelift after 2015 (Radio screen like Golf 7).


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select” then click on“5F – Electr. information”.

4 – Click on“Security Access – 16” then enter the code“S12345”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Developer mode”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, choose the value“activated”.

Restart MIB2, keep MENU button pressed until testmode menu appears

L’article Amarok (2H) Facelift – Activate Discover hidden menu est apparu en premier sur VAG Coding.

Purpose: to activate the MMI’s hidden menu (Hidden Menu / Green Menu / Menu Engineering).

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition, then run the VCDS program.

Line 1:

3 – Click on ” Select”, then click on ” Select “, then click on ” Select “. Procedure: 1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.5F – Information Electr.” .

4 – Click on “Adaptation – 10”.

5 – Select“Developer test mode ” then activate.

No need to restart the MMI.

To open the hidden menu with NAV/MAP (or CAR) and RADIO. First press and hold NAV/MAP (or CAR), then press RADIO and wait 5 seconds. .

–> To access the Audi Red Engineering menu

L’article Q3 (F3) – Activate hidden MMI menu est apparu en premier sur VAG Coding.

Purpose: Activates the green hidden menu (green menu, hidden menu, testmode, engineer mode) on MIB2.

/!\ Caution: Making certain changes in the hidden menu may cause MIB2 to freeze or no longer start /!\


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select” then click on“5F – Electr. information”.

4 – Click on“Security Access – 16” then enter the code“S12345”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Developer mode”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, choose the value“activated”.

Restart MIB2, keep MENU button pressed until testmode menu appears

L’article Ibiza (6F) – Activate hidden menu est apparu en premier sur VAG Coding.

Purpose: to activate the MMI’s hidden menu (Hidden Menu / Green Menu / Menu Engineering).

Procedure:
1 – With the engine off and the ignition switched off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostic port.

2 – Turn on the ignition, then launch the VCDS program.

Line 1:

3 – Click “Select,” then click “ 5F – Electrical Information“.

4 – Click on ” Adaptation – 10“.

5 – Click “Security Access – 16,” then enter the code “S12345“

6 – Select “Developer Test Mode” or “Developer Mode” or “Entwicklermodus” and then enable it.

No need to restart the MMI.

To open the hidden menu with NAV/MAP (or CAR) and RADIO. First press and hold NAV/MAP (or CAR), then press RADIO and wait 5 seconds. .

–> To access the Audi Red Engineering menu

L’article A5 (F5) – Activate hidden MMI menu est apparu en premier sur VAG Coding.