<?xml version="1.0" encoding="UTF-8"?><rss version="2.0"
	xmlns:content="http://purl.org/rss/1.0/modules/content/"
	xmlns:wfw="http://wellformedweb.org/CommentAPI/"
	xmlns:dc="http://purl.org/dc/elements/1.1/"
	xmlns:atom="http://www.w3.org/2005/Atom"
	xmlns:sy="http://purl.org/rss/1.0/modules/syndication/"
	xmlns:slash="http://purl.org/rss/1.0/modules/slash/"
	>

<channel>
	<title>Liste des codages pour Retrofit - VAG Coding</title>
	<atom:link href="https://www.vag-coding.net/tag/retrofit/feed/" rel="self" type="application/rss+xml" />
	<link>https://www.vag-coding.net/tag/retrofit/</link>
	<description>Codage Personnalisation et Activation d&#039;Options Cachées VCDS VAG-COM OBDeleven VCP Tuto Codes Défauts Sécurisé CarPlay VW AUDI SEAT SKODA</description>
	<lastBuildDate>Mon, 02 Nov 2026 08:56:56 +0000</lastBuildDate>
	<language>en-US</language>
	<sy:updatePeriod>
	hourly	</sy:updatePeriod>
	<sy:updateFrequency>
	1	</sy:updateFrequency>
	

<image>
	<url>https://www.vag-coding.net/wp-content/uploads/2022/12/cropped-cropped-990A929D-545E-4694-833C-F67C340B13FC-e1672418802812-150x150.jpeg</url>
	<title>Liste des codages pour Retrofit - VAG Coding</title>
	<link>https://www.vag-coding.net/tag/retrofit/</link>
	<width>32</width>
	<height>32</height>
</image> 
<site xmlns="com-wordpress:feed-additions:1">211573443</site>	<item>
		<title>Q5 (FY) &#8211; Enable Rearview Camera (Retrofit)</title>
		<link>https://www.vag-coding.net/audi/q5-fy/q5-fy-enable-rearview-camera-retrofit/</link>
		
		<dc:creator><![CDATA[T0MS]]></dc:creator>
		<pubDate>Mon, 02 Nov 2026 07:22:59 +0000</pubDate>
				<category><![CDATA[Q5 (FY)]]></category>
		<category><![CDATA[Camera]]></category>
		<category><![CDATA[MMI Audi]]></category>
		<category><![CDATA[Retrofit]]></category>
		<guid isPermaLink="false">https://www.vag-coding.fr/audi/q5-fy/q5-fy-enable-rearview-camera-retrofit/</guid>

					<description><![CDATA[<p>Purpose: Enables the rearview camera after it has been installed on the MMI (retrofit). Procedure: 1 &#8211; With the engine off and the ignition off, connect your official VAG-COM VCDS cable to the computer, then connect the other end to your vehicle’s diagnostic port. 2 &#8211; Turn on the ignition, then launch the VCDS program.&#46;&#46;&#46;</p>
<p>L’article <a href="https://www.vag-coding.net/audi/q5-fy/q5-fy-enable-rearview-camera-retrofit/">Q5 (FY) &#8211; Enable Rearview Camera (Retrofit)</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></description>
										<content:encoded><![CDATA[
<figure class="wp-block-image size-full"><img fetchpriority="high" decoding="async" width="1200" height="628" src="https://www.vag-coding.fr/wp-content/uploads/2023/02/AUDI-Q5-FY.png" alt="VAG Coding VCDS ODBeleven Audi Q5 FY" class="wp-image-7313" srcset="https://www.vag-coding.net/wp-content/uploads/2023/02/AUDI-Q5-FY.png 1200w, https://www.vag-coding.net/wp-content/uploads/2023/02/AUDI-Q5-FY-300x157.png 300w, https://www.vag-coding.net/wp-content/uploads/2023/02/AUDI-Q5-FY-1024x536.png 1024w, https://www.vag-coding.net/wp-content/uploads/2023/02/AUDI-Q5-FY-768x402.png 768w, https://www.vag-coding.net/wp-content/uploads/2023/02/AUDI-Q5-FY-600x314.png 600w" sizes="(max-width: 1200px) 100vw, 1200px" /></figure>

<p class="wp-block-paragraph"><strong>Purpose:</strong> Enables the rearview camera after it has been installed on the MMI (retrofit). <br/><br/><br/><strong>Procedure:</strong> <br/><strong>1</strong> &#8211; With the engine off and the ignition off, connect your official VAG-COM VCDS cable to the computer, then connect the other end to your vehicle’s diagnostic port.<br/><br/><strong>2</strong> &#8211; Turn on the ignition, then launch the VCDS program.</p>

<p class="wp-block-paragraph"><strong>Wiring : </strong></p>

<ul class="wp-block-list">
<li><strong>2 CAN signal wires</strong> (for communication) &#8211; <strong>Orange-Purple</strong> (CAN High) and <strong>Orange-Brown</strong> (CAN Low)</li>



<li><strong>2 video signal wires</strong> &#8211; <strong>Black</strong> and <strong>transparent</strong></li>



<li><strong>2 power wires</strong> &#8211; <strong>White</strong> (less than 12 V) and <strong>brown</strong> (GND)</li>
</ul>

<p class="wp-block-paragraph"><strong>Line 1:</strong><br/><br/> 3 &#8211; Click on<strong>&#8220;Select&#8221;</strong>, then click on<strong>&#8220;19 &#8211; CAN Gateway</strong>&#8220;.<br/><br/> 4 &#8211; Select <strong>&#8220;Installation List&#8221;</strong><br/><br/> 5 &#8211; Tick:<strong>&#8220;6C &#8211; Rear View Camera</strong>&#8221; in the list</p>

<p class="wp-block-paragraph"><strong>6</strong> &#8211; Save coding</p>

<p class="wp-block-paragraph"><strong>Line 2:</strong><br/><br/><strong>3</strong> &#8211; Click &#8220;<strong>Select</strong>,&#8221; then click &#8220;<strong>6C &#8211; Rear View Camera</strong>.&#8221;<br/><br/><strong>5</strong> &#8211; Click on<strong>&#8220;Coding &#8211; 07</strong>&#8221; then click on<strong>&#8220;Long Coding Helper</strong>&#8220;.<br/><br/><strong>6</strong> &#8211; Select byte <strong>07</strong><br/>Then check bit <strong>0, 1, 2 and 4</strong></p>

<p class="wp-block-paragraph">Example:<br/>Byte 04 &#8211; bit 0 locked at 1 and AHK<br/>Byte 04 &#8211; Bit 1 on 1 &#8211; Front and rear parking aid installed<br/>Byte 04 &#8211; Bit 1 on 0 &#8211; Rear parking aid installed<br/>Byte 04 &#8211; bits 2 on 1 &#8211; Parking unit installed<br/>Byte 07 &#8211; bits 0 on 1 &#8211; Guides through<br/>Byte 07 &#8211; bits 1 on 1 &#8211; Parallel guides<br/>Byte 07 &#8211; Bit 2 on 1 &#8211; Trailer Guides<br/>Byte 07 &#8211; Bit 3 on 1 &#8211; Guide cross<br/>Byte 07 &#8211; Add 4 on 1 &#8211; Park direction aid Guide installed</p>

<p class="wp-block-paragraph"><strong>Line 3</strong> <strong>:</strong><br/><br/><strong>3</strong> &#8211; Click &#8220;<strong>Select</strong>,&#8221; then click &#8220;<strong><strong>&#8220;09 &#8211; Cent. Elect.&#8221;</strong></strong>&#8220;.<br/><br/><strong>4</strong> &#8211; Click on<strong>&#8220;Coding &#8211; 07</strong>&#8221; then click on<strong>&#8220;Long Coding Helper</strong>&#8220;.<br/><br/><strong>5</strong> &#8211; Select byte <strong>35</strong><br/>Then check bit <strong>4</strong></p>

<p class="wp-block-paragraph">If you have an SOS button, the code is different. Byte 35 is missing, so go to <strong>byte 38,</strong> at <strong>Bit 2-3</strong>, select “<strong><strong>04 camera variant_rvc, installed</strong></strong>”. See image below.</p>

<p class="wp-block-paragraph">For the Q5 Facelift with MIB3, select <strong>&#8220;Rvcc&#8221;</strong></p>

<figure class="wp-block-image size-large"><img decoding="async" width="1024" height="576" src="https://www.vag-coding.fr/wp-content/uploads/2025/03/cameraa4-1024x576.jpeg" alt="" class="wp-image-31651" srcset="https://www.vag-coding.net/wp-content/uploads/2025/03/cameraa4-1024x576.jpeg 1024w, https://www.vag-coding.net/wp-content/uploads/2025/03/cameraa4-300x169.jpeg 300w, https://www.vag-coding.net/wp-content/uploads/2025/03/cameraa4-768x432.jpeg 768w, https://www.vag-coding.net/wp-content/uploads/2025/03/cameraa4-1536x864.jpeg 1536w, https://www.vag-coding.net/wp-content/uploads/2025/03/cameraa4-520x293.jpeg 520w, https://www.vag-coding.net/wp-content/uploads/2025/03/cameraa4-600x338.jpeg 600w, https://www.vag-coding.net/wp-content/uploads/2025/03/cameraa4.jpeg 1920w" sizes="(max-width: 1024px) 100vw, 1024px" /></figure>

<figure class="wp-block-image size-large"><img decoding="async" width="576" height="1024" src="https://www.vag-coding.fr/wp-content/uploads/2025/03/obdelevencamera-576x1024.jpg" alt="" class="wp-image-31658" srcset="https://www.vag-coding.net/wp-content/uploads/2025/03/obdelevencamera-576x1024.jpg 576w, https://www.vag-coding.net/wp-content/uploads/2025/03/obdelevencamera-169x300.jpg 169w, https://www.vag-coding.net/wp-content/uploads/2025/03/obdelevencamera-768x1365.jpg 768w, https://www.vag-coding.net/wp-content/uploads/2025/03/obdelevencamera-600x1066.jpg 600w, https://www.vag-coding.net/wp-content/uploads/2025/03/obdelevencamera.jpg 844w" sizes="(max-width: 576px) 100vw, 576px" /></figure>

<p class="wp-block-paragraph"><strong>Line 4:</strong><br/><br/><strong>3</strong> &#8211; Click &#8220;<strong>Select</strong>,&#8221; then click &#8220;<strong>5F – Electrical Information.</strong>&#8220;<br/><br/><strong>4</strong> &#8211; Click &#8220;<strong>Security Access &#8211; 16</strong>,&#8221; then enter the code &#8220;<strong>20103</strong>&#8220;<br/><br/><strong>5</strong> &#8211; Click on &#8220;<strong>Adaptation &#8211; 10</strong>&#8220;<br/><br/><strong>6</strong> &#8211; At the very top of this page, there is a drop-down menu.<br/>From this drop-down menu, select &#8220;<strong><strong>Car Function List BAP Gen2 &#8211; VPS_0x0B</strong></strong>&#8220;<br/><br/><strong>7</strong> &#8211; On this same page, there is a second drop-down menu, but further down<br/>the page.<br/>From this menu, select the value &#8220;<strong>active</strong>&#8220;</p>

<p class="wp-block-paragraph"><strong>Line 5:</strong><br/><br/><strong>3</strong> &#8211; Click &#8220;<strong>Select</strong>,&#8221; then click &#8220;<strong>5F – Electrical Information.</strong>&#8220;<br/><br/><strong>4</strong> &#8211; Click &#8220;<strong>Security Access &#8211; 16</strong>,&#8221; then enter the code &#8220;<strong>20103</strong>&#8220;<br/><br/><strong>5</strong> &#8211; Click on<strong>“Adaptation &#8211; 10</strong>”.<br/><br/><strong>6</strong> &#8211; On this page, at the very top, there is a drop-down menu.<br/>In this drop-down menu, choose &#8220;<strong><strong><strong>Car Function List BAP Gen2 &#8211; VPS_0x0B_msg_bus</strong></strong></strong>&#8220;<br/><br/><strong>7</strong> &#8211; On this same page, there is a second drop-down menu at the bottom<br/>of the page.<br/>On this menu, choose the value &#8220;<strong><strong>Terminal 15</strong></strong>&#8220;</p>

<p class="wp-block-paragraph">For A4 B9.5 Facelift with MIB3, search:<strong>“Vehicle function list BAP</strong>”.</p>

<figure class="wp-block-gallery has-nested-images columns-default is-cropped wp-block-gallery-1 is-layout-flex wp-block-gallery-is-layout-flex">
<figure class="wp-block-image size-large"><img loading="lazy" decoding="async" width="576" height="1024" data-id="31660" src="https://www.vag-coding.fr/wp-content/uploads/2025/03/vpscamera-576x1024.jpg" alt="" class="wp-image-31660" srcset="https://www.vag-coding.net/wp-content/uploads/2025/03/vpscamera-576x1024.jpg 576w, https://www.vag-coding.net/wp-content/uploads/2025/03/vpscamera-169x300.jpg 169w, https://www.vag-coding.net/wp-content/uploads/2025/03/vpscamera-768x1365.jpg 768w, https://www.vag-coding.net/wp-content/uploads/2025/03/vpscamera-600x1066.jpg 600w, https://www.vag-coding.net/wp-content/uploads/2025/03/vpscamera.jpg 844w" sizes="auto, (max-width: 576px) 100vw, 576px" /></figure>



<figure class="wp-block-image size-large"><img loading="lazy" decoding="async" width="576" height="1024" data-id="31661" src="https://www.vag-coding.fr/wp-content/uploads/2025/03/vpscamera2-576x1024.jpg" alt="" class="wp-image-31661" srcset="https://www.vag-coding.net/wp-content/uploads/2025/03/vpscamera2-576x1024.jpg 576w, https://www.vag-coding.net/wp-content/uploads/2025/03/vpscamera2-169x300.jpg 169w, https://www.vag-coding.net/wp-content/uploads/2025/03/vpscamera2-768x1365.jpg 768w, https://www.vag-coding.net/wp-content/uploads/2025/03/vpscamera2-600x1066.jpg 600w, https://www.vag-coding.net/wp-content/uploads/2025/03/vpscamera2.jpg 844w" sizes="auto, (max-width: 576px) 100vw, 576px" /></figure>
</figure>

<hr class="wp-block-separator has-alpha-channel-opacity"/>

<h4 class="wp-block-heading">MMI reset</h4>

<p class="wp-block-paragraph">After coding, you need to <strong>reset MMI.</strong> Push NAV/MAP, RADIO and the center button simultaneously for a few seconds, then release.</p>

<p class="wp-block-paragraph">To reset the MIB3 on the Q5 Facelift, press the volume button on the center console until the MMI turns back on.</p>

<figure class="wp-block-image size-large"><img loading="lazy" decoding="async" width="1024" height="683" src="https://www.vag-coding.fr/wp-content/uploads/2025/03/reboot-mmi-audi-1024x683.jpg" alt="" class="wp-image-31653" srcset="https://www.vag-coding.net/wp-content/uploads/2025/03/reboot-mmi-audi-1024x683.jpg 1024w, https://www.vag-coding.net/wp-content/uploads/2025/03/reboot-mmi-audi-300x200.jpg 300w, https://www.vag-coding.net/wp-content/uploads/2025/03/reboot-mmi-audi-768x512.jpg 768w, https://www.vag-coding.net/wp-content/uploads/2025/03/reboot-mmi-audi-1536x1024.jpg 1536w, https://www.vag-coding.net/wp-content/uploads/2025/03/reboot-mmi-audi-600x400.jpg 600w, https://www.vag-coding.net/wp-content/uploads/2025/03/reboot-mmi-audi.jpg 1620w" sizes="auto, (max-width: 1024px) 100vw, 1024px" /></figure>

<p class="wp-block-paragraph">The camera must be started when you select reverse gear or press the parking button (P) in the center console. The result:</p>

<figure class="wp-block-image size-large"><img loading="lazy" decoding="async" width="1024" height="768" src="https://www.vag-coding.fr/wp-content/uploads/2025/03/camerarecula4-1024x768.jpg" alt="" class="wp-image-31654" srcset="https://www.vag-coding.net/wp-content/uploads/2025/03/camerarecula4-1024x768.jpg 1024w, https://www.vag-coding.net/wp-content/uploads/2025/03/camerarecula4-300x225.jpg 300w, https://www.vag-coding.net/wp-content/uploads/2025/03/camerarecula4-768x576.jpg 768w, https://www.vag-coding.net/wp-content/uploads/2025/03/camerarecula4-600x450.jpg 600w, https://www.vag-coding.net/wp-content/uploads/2025/03/camerarecula4.jpg 1366w" sizes="auto, (max-width: 1024px) 100vw, 1024px" /></figure>

<p class="wp-block-paragraph"></p>
<button class="simplefavorite-button has-count preset" data-postid="58457" data-siteid="1" data-groupid="1" data-favoritecount="0" style="background-color:#4c9fe8;color:#000000;"><i class="sf-icon-love" style=""></i>Love<span class="simplefavorite-button-count" style="">0</span></button><p>L’article <a href="https://www.vag-coding.net/audi/q5-fy/q5-fy-enable-rearview-camera-retrofit/">Q5 (FY) &#8211; Enable Rearview Camera (Retrofit)</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></content:encoded>
					
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">58457</post-id>	</item>
		<item>
		<title>A5 (F5) &#8211; Enable rearview camera (retrofit)</title>
		<link>https://www.vag-coding.net/audi/a5-f5/a5-f5-enable-rearview-camera-retrofit/</link>
		
		<dc:creator><![CDATA[T0MS]]></dc:creator>
		<pubDate>Mon, 02 Nov 2026 07:20:57 +0000</pubDate>
				<category><![CDATA[A5 (F5)]]></category>
		<category><![CDATA[Camera]]></category>
		<category><![CDATA[MMI Audi]]></category>
		<category><![CDATA[Retrofit]]></category>
		<guid isPermaLink="false">https://www.vag-coding.fr/audi/a5-f5/a5-f5-enable-rearview-camera-retrofit/</guid>

					<description><![CDATA[<p>Purpose: Enables the rearview camera after it has been installed on the MMI (retrofit). Procedure: 1 &#8211; With the engine off and the ignition off, connect your official VAG-COM VCDS cable to the computer, then connect the other end to your vehicle’s diagnostic port. 2 &#8211; Turn on the ignition, then launch the VCDS program.&#46;&#46;&#46;</p>
<p>L’article <a href="https://www.vag-coding.net/audi/a5-f5/a5-f5-enable-rearview-camera-retrofit/">A5 (F5) &#8211; Enable rearview camera (retrofit)</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></description>
										<content:encoded><![CDATA[
<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="1200" height="628" src="https://www.vag-coding.fr/wp-content/uploads/2023/01/AUDI-A5-F5.png" alt="VAG Coding VCDS ODBeleven Audi A5 F5" class="wp-image-6741" srcset="https://www.vag-coding.net/wp-content/uploads/2023/01/AUDI-A5-F5.png 1200w, https://www.vag-coding.net/wp-content/uploads/2023/01/AUDI-A5-F5-300x157.png 300w, https://www.vag-coding.net/wp-content/uploads/2023/01/AUDI-A5-F5-1024x536.png 1024w, https://www.vag-coding.net/wp-content/uploads/2023/01/AUDI-A5-F5-768x402.png 768w, https://www.vag-coding.net/wp-content/uploads/2023/01/AUDI-A5-F5-600x314.png 600w" sizes="auto, (max-width: 1200px) 100vw, 1200px" /></figure>

<p class="wp-block-paragraph"><strong>Purpose:</strong> Enables the rearview camera after it has been installed on the MMI (retrofit). <br/><br/><br/><strong>Procedure:</strong> <br/><strong>1</strong> &#8211; With the engine off and the ignition off, connect your official VAG-COM VCDS cable to the computer, then connect the other end to your vehicle’s diagnostic port.<br/><br/><strong>2</strong> &#8211; Turn on the ignition, then launch the VCDS program.</p>

<p class="wp-block-paragraph"><strong>Wiring : </strong></p>

<ul class="wp-block-list">
<li><strong>2 CAN signal wires</strong> (for communication) &#8211; <strong>Orange-Purple</strong> (CAN High) and <strong>Orange-Brown</strong> (CAN Low)</li>



<li><strong>2 video signal wires</strong> &#8211; <strong>Black</strong> and <strong>transparent</strong></li>



<li><strong>2 power wires</strong> &#8211; <strong>White</strong> (less than 12 V) and <strong>brown</strong> (GND)</li>
</ul>

<p class="wp-block-paragraph"><strong>Line 1:</strong><br/><br/> 3 &#8211; Click on<strong>&#8220;Select&#8221;</strong>, then click on<strong>&#8220;19 &#8211; CAN Gateway</strong>&#8220;.<br/><br/> 4 &#8211; Select <strong>&#8220;Installation List&#8221;</strong><br/><br/> 5 &#8211; Tick:<strong>&#8220;6C &#8211; Rear View Camera</strong>&#8221; in the list</p>

<p class="wp-block-paragraph"><strong>6</strong> &#8211; Save coding</p>

<p class="wp-block-paragraph"><strong>Line 2:</strong><br/><br/><strong>3</strong> &#8211; Click &#8220;<strong>Select</strong>,&#8221; then click &#8220;<strong>6C &#8211; Rear View Camera</strong>.&#8221;<br/><br/><strong>5</strong> &#8211; Click on<strong>&#8220;Coding &#8211; 07</strong>&#8221; then click on<strong>&#8220;Long Coding Helper</strong>&#8220;.<br/><br/><strong>6</strong> &#8211; Select byte <strong>07</strong><br/>Then check bit <strong>0, 1, 2 and 4</strong></p>

<p class="wp-block-paragraph">Example:<br/>Byte 04 &#8211; bit 0 locked at 1 and AHK<br/>Byte 04 &#8211; Bit 1 on 1 &#8211; Front and rear parking aid installed<br/>Byte 04 &#8211; Bit 1 on 0 &#8211; Rear parking aid installed<br/>Byte 04 &#8211; bits 2 on 1 &#8211; Parking unit installed<br/>Byte 07 &#8211; bits 0 on 1 &#8211; Guides through<br/>Byte 07 &#8211; bits 1 on 1 &#8211; Parallel guides<br/>Byte 07 &#8211; Bit 2 on 1 &#8211; Trailer Guides<br/>Byte 07 &#8211; Bit 3 on 1 &#8211; Guide cross<br/>Byte 07 &#8211; Add 4 on 1 &#8211; Park direction aid Guide installed</p>

<p class="wp-block-paragraph"><strong>Line 3</strong> <strong>:</strong><br/><br/><strong>3</strong> &#8211; Click &#8220;<strong>Select</strong>,&#8221; then click &#8220;<strong><strong>&#8220;09 &#8211; Cent. Elect.&#8221;</strong></strong>&#8220;.<br/><br/><strong>4</strong> &#8211; Click on<strong>&#8220;Coding &#8211; 07</strong>&#8221; then click on<strong>&#8220;Long Coding Helper</strong>&#8220;.<br/><br/><strong>5</strong> &#8211; Select byte <strong>35</strong><br/>Then check bit <strong>4</strong></p>

<p class="wp-block-paragraph">If you have an SOS button, the code is different. Byte 35 is missing, so go to <strong>byte 38,</strong> at <strong>Bit 2-3</strong>, select “<strong><strong>04 camera variant_rvc, installed</strong></strong>”. See image below.</p>

<p class="wp-block-paragraph">For the A5 Facelift with MIB3, select <strong>&#8220;Rvcc&#8221;</strong></p>

<figure class="wp-block-image size-large"><img loading="lazy" decoding="async" width="1024" height="576" src="https://www.vag-coding.fr/wp-content/uploads/2025/03/cameraa4-1024x576.jpeg" alt="" class="wp-image-31651" srcset="https://www.vag-coding.net/wp-content/uploads/2025/03/cameraa4-1024x576.jpeg 1024w, https://www.vag-coding.net/wp-content/uploads/2025/03/cameraa4-300x169.jpeg 300w, https://www.vag-coding.net/wp-content/uploads/2025/03/cameraa4-768x432.jpeg 768w, https://www.vag-coding.net/wp-content/uploads/2025/03/cameraa4-1536x864.jpeg 1536w, https://www.vag-coding.net/wp-content/uploads/2025/03/cameraa4-520x293.jpeg 520w, https://www.vag-coding.net/wp-content/uploads/2025/03/cameraa4-600x338.jpeg 600w, https://www.vag-coding.net/wp-content/uploads/2025/03/cameraa4.jpeg 1920w" sizes="auto, (max-width: 1024px) 100vw, 1024px" /></figure>

<figure class="wp-block-image size-large"><img loading="lazy" decoding="async" width="576" height="1024" src="https://www.vag-coding.fr/wp-content/uploads/2025/03/obdelevencamera-576x1024.jpg" alt="" class="wp-image-31658" srcset="https://www.vag-coding.net/wp-content/uploads/2025/03/obdelevencamera-576x1024.jpg 576w, https://www.vag-coding.net/wp-content/uploads/2025/03/obdelevencamera-169x300.jpg 169w, https://www.vag-coding.net/wp-content/uploads/2025/03/obdelevencamera-768x1365.jpg 768w, https://www.vag-coding.net/wp-content/uploads/2025/03/obdelevencamera-600x1066.jpg 600w, https://www.vag-coding.net/wp-content/uploads/2025/03/obdelevencamera.jpg 844w" sizes="auto, (max-width: 576px) 100vw, 576px" /></figure>

<p class="wp-block-paragraph"><strong>Line 4:</strong><br/><br/><strong>3</strong> &#8211; Click &#8220;<strong>Select</strong>,&#8221; then click &#8220;<strong>5F – Electrical Information.</strong>&#8220;<br/><br/><strong>4</strong> &#8211; Click &#8220;<strong>Security Access &#8211; 16</strong>,&#8221; then enter the code &#8220;<strong>20103</strong>&#8220;<br/><br/><strong>5</strong> &#8211; Click on &#8220;<strong>Adaptation &#8211; 10</strong>&#8220;<br/><br/><strong>6</strong> &#8211; At the very top of this page, there is a drop-down menu.<br/>From this drop-down menu, select &#8220;<strong><strong>Car Function List BAP Gen2 &#8211; VPS_0x0B</strong></strong>&#8220;<br/><br/><strong>7</strong> &#8211; On this same page, there is a second drop-down menu, but further down<br/>the page.<br/>From this menu, select the value &#8220;<strong>active</strong>&#8220;</p>

<p class="wp-block-paragraph"><strong>Line 5:</strong><br/><br/><strong>3</strong> &#8211; Click &#8220;<strong>Select</strong>,&#8221; then click &#8220;<strong>5F – Electrical Information.</strong>&#8220;<br/><br/><strong>4</strong> &#8211; Click &#8220;<strong>Security Access &#8211; 16</strong>,&#8221; then enter the code &#8220;<strong>20103</strong>&#8220;<br/><br/><strong>5</strong> &#8211; Click on<strong>“Adaptation &#8211; 10</strong>”.<br/><br/><strong>6</strong> &#8211; On this page, at the very top, there is a drop-down menu.<br/>In this drop-down menu, choose &#8220;<strong><strong><strong>Car Function List BAP Gen2 &#8211; VPS_0x0B_msg_bus</strong></strong></strong>&#8220;<br/><br/><strong>7</strong> &#8211; On this same page, there is a second drop-down menu at the bottom<br/>of the page.<br/>On this menu, choose the value &#8220;<strong><strong>Terminal 15</strong></strong>&#8220;</p>

<p class="wp-block-paragraph">For the A5 Facelift with MIB3, search for: &#8220;<strong>Vehicle function list BAP</strong>&#8220;</p>

<figure class="wp-block-gallery has-nested-images columns-default is-cropped wp-block-gallery-2 is-layout-flex wp-block-gallery-is-layout-flex">
<figure class="wp-block-image size-large"><img loading="lazy" decoding="async" width="576" height="1024" data-id="31660" src="https://www.vag-coding.fr/wp-content/uploads/2025/03/vpscamera-576x1024.jpg" alt="" class="wp-image-31660" srcset="https://www.vag-coding.net/wp-content/uploads/2025/03/vpscamera-576x1024.jpg 576w, https://www.vag-coding.net/wp-content/uploads/2025/03/vpscamera-169x300.jpg 169w, https://www.vag-coding.net/wp-content/uploads/2025/03/vpscamera-768x1365.jpg 768w, https://www.vag-coding.net/wp-content/uploads/2025/03/vpscamera-600x1066.jpg 600w, https://www.vag-coding.net/wp-content/uploads/2025/03/vpscamera.jpg 844w" sizes="auto, (max-width: 576px) 100vw, 576px" /></figure>



<figure class="wp-block-image size-large"><img loading="lazy" decoding="async" width="576" height="1024" data-id="31661" src="https://www.vag-coding.fr/wp-content/uploads/2025/03/vpscamera2-576x1024.jpg" alt="" class="wp-image-31661" srcset="https://www.vag-coding.net/wp-content/uploads/2025/03/vpscamera2-576x1024.jpg 576w, https://www.vag-coding.net/wp-content/uploads/2025/03/vpscamera2-169x300.jpg 169w, https://www.vag-coding.net/wp-content/uploads/2025/03/vpscamera2-768x1365.jpg 768w, https://www.vag-coding.net/wp-content/uploads/2025/03/vpscamera2-600x1066.jpg 600w, https://www.vag-coding.net/wp-content/uploads/2025/03/vpscamera2.jpg 844w" sizes="auto, (max-width: 576px) 100vw, 576px" /></figure>
</figure>

<hr class="wp-block-separator has-alpha-channel-opacity"/>

<h4 class="wp-block-heading">MMI reset</h4>

<p class="wp-block-paragraph">After coding, you need to <strong>reset MMI.</strong> Push NAV/MAP, RADIO and the center button simultaneously for a few seconds, then release.</p>

<p class="wp-block-paragraph">To reset the MIB3 on the A5 Facelift, press the volume button on the center console until the MMI turns back on.</p>

<figure class="wp-block-image size-large"><img loading="lazy" decoding="async" width="1024" height="683" src="https://www.vag-coding.fr/wp-content/uploads/2025/03/reboot-mmi-audi-1024x683.jpg" alt="" class="wp-image-31653" srcset="https://www.vag-coding.net/wp-content/uploads/2025/03/reboot-mmi-audi-1024x683.jpg 1024w, https://www.vag-coding.net/wp-content/uploads/2025/03/reboot-mmi-audi-300x200.jpg 300w, https://www.vag-coding.net/wp-content/uploads/2025/03/reboot-mmi-audi-768x512.jpg 768w, https://www.vag-coding.net/wp-content/uploads/2025/03/reboot-mmi-audi-1536x1024.jpg 1536w, https://www.vag-coding.net/wp-content/uploads/2025/03/reboot-mmi-audi-600x400.jpg 600w, https://www.vag-coding.net/wp-content/uploads/2025/03/reboot-mmi-audi.jpg 1620w" sizes="auto, (max-width: 1024px) 100vw, 1024px" /></figure>

<p class="wp-block-paragraph">The camera must be started when you select reverse gear or press the parking button (P) in the center console. The result:</p>

<figure class="wp-block-image size-large"><img loading="lazy" decoding="async" width="1024" height="768" src="https://www.vag-coding.fr/wp-content/uploads/2025/03/camerarecula4-1024x768.jpg" alt="" class="wp-image-31654" srcset="https://www.vag-coding.net/wp-content/uploads/2025/03/camerarecula4-1024x768.jpg 1024w, https://www.vag-coding.net/wp-content/uploads/2025/03/camerarecula4-300x225.jpg 300w, https://www.vag-coding.net/wp-content/uploads/2025/03/camerarecula4-768x576.jpg 768w, https://www.vag-coding.net/wp-content/uploads/2025/03/camerarecula4-600x450.jpg 600w, https://www.vag-coding.net/wp-content/uploads/2025/03/camerarecula4.jpg 1366w" sizes="auto, (max-width: 1024px) 100vw, 1024px" /></figure>

<p class="wp-block-paragraph"></p>
<button class="simplefavorite-button has-count preset" data-postid="58452" data-siteid="1" data-groupid="1" data-favoritecount="0" style="background-color:#4c9fe8;color:#000000;"><i class="sf-icon-love" style=""></i>Love<span class="simplefavorite-button-count" style="">0</span></button><p>L’article <a href="https://www.vag-coding.net/audi/a5-f5/a5-f5-enable-rearview-camera-retrofit/">A5 (F5) &#8211; Enable rearview camera (retrofit)</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></content:encoded>
					
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">58452</post-id>	</item>
		<item>
		<title>Arona (KJ) &#8211; Activate Rearview Camera (Retrofit)</title>
		<link>https://www.vag-coding.net/seat-cupra/arona-kj/arona-kj-activate-rearview-camera-retrofit/</link>
		
		<dc:creator><![CDATA[T0MS]]></dc:creator>
		<pubDate>Wed, 07 Oct 2026 17:14:07 +0000</pubDate>
				<category><![CDATA[Arona (KJ)]]></category>
		<category><![CDATA[Camera]]></category>
		<category><![CDATA[MIB Seat]]></category>
		<category><![CDATA[Retrofit]]></category>
		<guid isPermaLink="false">https://www.vag-coding.fr/seat-cupra/arona-kj/arona-kj-activate-rearview-camera-retrofit/</guid>

					<description><![CDATA[<p>Purpose: Enables the rearview camera after it has been installed (retrofit). Proceed : 1 &#8211; Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle&#8217;s diagnostics socket. 2 &#8211; Switch on the ignition and run the VCDS program. Line 1: 3 &#8211; Click on“Select”&#46;&#46;&#46;</p>
<p>L’article <a href="https://www.vag-coding.net/seat-cupra/arona-kj/arona-kj-activate-rearview-camera-retrofit/">Arona (KJ) &#8211; Activate Rearview Camera (Retrofit)</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></description>
										<content:encoded><![CDATA[
<figure class="wp-block-image size-large"><img loading="lazy" decoding="async" width="1024" height="536" src="https://www.vag-coding.fr/wp-content/uploads/2022/12/SEAT-ARONA-KJ-1024x536.png" alt="VAG Coding VCDS ODBeleven Seat Arona KJ" class="wp-image-5068" srcset="https://www.vag-coding.net/wp-content/uploads/2022/12/SEAT-ARONA-KJ-1024x536.png 1024w, https://www.vag-coding.net/wp-content/uploads/2022/12/SEAT-ARONA-KJ-300x157.png 300w, https://www.vag-coding.net/wp-content/uploads/2022/12/SEAT-ARONA-KJ-768x402.png 768w, https://www.vag-coding.net/wp-content/uploads/2022/12/SEAT-ARONA-KJ-600x314.png 600w, https://www.vag-coding.net/wp-content/uploads/2022/12/SEAT-ARONA-KJ.png 1200w" sizes="auto, (max-width: 1024px) 100vw, 1024px" /></figure>

<p class="wp-block-paragraph"><strong>Purpose:</strong> Enables the rearview camera after it has been installed (retrofit).  <br/><br/><br/><strong>Proceed :</strong> <br/><strong>1</strong> &#8211; Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle&#8217;s diagnostics socket.<br/><br/><strong>2</strong> &#8211; Switch on the ignition and run the VCDS program.<br/><br/><strong>Line 1:</strong><br/><br/><strong>3</strong> &#8211; Click on<strong>“Select”</strong> then click on<strong>“5F &#8211; Electr. information</strong>”.<br/><br/><strong>4</strong> &#8211; Click on<strong>“Security Access &#8211; 16</strong>” then enter the code<strong>“20103</strong>”.<br/><br/><strong>5</strong> &#8211; Click on<strong>&#8220;Coding &#8211; 07</strong>&#8221; then click on<strong>&#8220;Long Coding Helper</strong>&#8220;.<br/><br/><strong>6</strong> &#8211; Select byte <strong>19</strong><br/>. Then set bit <strong>4</strong> to &#8220;Rear View Camera (RVC) Low installed (PR-KA1).&#8221;</p>

<figure class="wp-block-image size-large"><img loading="lazy" decoding="async" width="1024" height="483" src="https://www.vag-coding.fr/wp-content/uploads/2023/03/C25A41FA-66F7-4FC9-B7F4-1761395A1D01-1024x483.jpeg" alt="" class="wp-image-8929" srcset="https://www.vag-coding.net/wp-content/uploads/2023/03/C25A41FA-66F7-4FC9-B7F4-1761395A1D01-1024x483.jpeg 1024w, https://www.vag-coding.net/wp-content/uploads/2023/03/C25A41FA-66F7-4FC9-B7F4-1761395A1D01-300x141.jpeg 300w, https://www.vag-coding.net/wp-content/uploads/2023/03/C25A41FA-66F7-4FC9-B7F4-1761395A1D01-768x362.jpeg 768w, https://www.vag-coding.net/wp-content/uploads/2023/03/C25A41FA-66F7-4FC9-B7F4-1761395A1D01-600x283.jpeg 600w, https://www.vag-coding.net/wp-content/uploads/2023/03/C25A41FA-66F7-4FC9-B7F4-1761395A1D01.jpeg 1179w" sizes="auto, (max-width: 1024px) 100vw, 1024px" /></figure>

<p class="wp-block-paragraph"><strong>Line 2 (Optional, if parking assist is available)</strong> <strong>:</strong><br/><br/><strong>3</strong> &#8211; Click &#8220;<strong>Select</strong>,&#8221; then click &#8220;<strong>10 &#8211; Parking Assistance</strong>.&#8221;<br/><br/><strong>4</strong> &#8211; Click on<strong>&#8220;Coding &#8211; 07</strong>&#8221; then click on<strong>&#8220;Long Coding Helper</strong>&#8220;.<br/><br/><strong>5</strong> &#8211; Select byte <strong>02</strong><br/>. Then, for bits <strong>4-5</strong>, select<em> “10 Camera Type: Rear View Camera (RVC) installed.”</em></p>

<p class="wp-block-paragraph"></p>

<p class="wp-block-paragraph"><strong>Hardware upgrade :</strong></p>

<p class="wp-block-paragraph">The camera&#8217;s video cable is connected to the infotainment control unit. It is installed in the glovebox.   <br/><br/>The 2 pins of the reversing camera are used in the 12-pin quadlock (blue). Usable cable set: Part no. 000 979 009 E <br/><br/>Quadblock Assignment :<br/><br/>Pin 6 = video line<br/>Pin 12 = shielding</p>
<button class="simplefavorite-button has-count preset" data-postid="54764" data-siteid="1" data-groupid="1" data-favoritecount="0" style="background-color:#4c9fe8;color:#000000;"><i class="sf-icon-love" style=""></i>Love<span class="simplefavorite-button-count" style="">0</span></button><p>L’article <a href="https://www.vag-coding.net/seat-cupra/arona-kj/arona-kj-activate-rearview-camera-retrofit/">Arona (KJ) &#8211; Activate Rearview Camera (Retrofit)</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></content:encoded>
					
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">54764</post-id>	</item>
		<item>
		<title>Octavia 4 (NX) &#8211; Enable the trailer hitch (retrofit)</title>
		<link>https://www.vag-coding.net/skoda/octavia-4-nx/octavia-4-nx-enable-the-trailer-hitch-retrofit/</link>
		
		<dc:creator><![CDATA[T0MS]]></dc:creator>
		<pubDate>Sat, 08 Aug 2026 00:37:14 +0000</pubDate>
				<category><![CDATA[Octavia 4 (NX)]]></category>
		<category><![CDATA[Retrofit]]></category>
		<guid isPermaLink="false">https://www.vag-coding.fr/skoda/octavia-4-nx/octavia-4-nx-enable-the-trailer-hitch-retrofit/</guid>

					<description><![CDATA[<p>Purpose: Enables the installation of a retrofit trailer hitch (trailer/towbar retrofit). Warning!! Depending on the modules you have installed, there are up to 9 coding lines to complete here; most control units require a long coding process with a &#8220;trailer&#8221; that must be enabled! SFD: yes Proceed : 1 &#8211; Engine off, ignition off, connect&#46;&#46;&#46;</p>
<p>L’article <a href="https://www.vag-coding.net/skoda/octavia-4-nx/octavia-4-nx-enable-the-trailer-hitch-retrofit/">Octavia 4 (NX) &#8211; Enable the trailer hitch (retrofit)</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></description>
										<content:encoded><![CDATA[
<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="600" height="400" src="https://www.vag-coding.fr/wp-content/uploads/2024/01/skoda_octavia_4.png" alt="VAG Coding VCDS ODBeleven Skoda Octavia 4 NX" class="wp-image-16841" srcset="https://www.vag-coding.net/wp-content/uploads/2024/01/skoda_octavia_4.png 600w, https://www.vag-coding.net/wp-content/uploads/2024/01/skoda_octavia_4-300x200.png 300w" sizes="auto, (max-width: 600px) 100vw, 600px" /></figure>

<p class="wp-block-paragraph"><strong>Purpose:</strong> Enables the installation of a retrofit trailer hitch (trailer/towbar retrofit).  </p>

<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="591" height="327" src="https://www.vag-coding.fr/wp-content/uploads/2024/01/Capture-decran-2024-01-09-215831.png" alt="" class="wp-image-16391" srcset="https://www.vag-coding.net/wp-content/uploads/2024/01/Capture-decran-2024-01-09-215831.png 591w, https://www.vag-coding.net/wp-content/uploads/2024/01/Capture-decran-2024-01-09-215831-300x166.png 300w" sizes="auto, (max-width: 591px) 100vw, 591px" /></figure>

<p class="wp-block-paragraph"><strong>Warning!! Depending on the modules you have installed, there are up to 9 coding lines to complete here; most control units require a long coding process with a &#8220;trailer&#8221; that must be enabled!   </strong><br/><br/>SFD: yes<br/><br/><strong>Proceed :</strong> <br/><strong>1</strong> &#8211; Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle&#8217;s diagnostic socket or OBDeleven box.<br/><br/><strong>2</strong> &#8211; Switch on the ignition and run the VCDS program.  </p>

<p class="wp-block-paragraph"><br/><br/><strong>Line 1:</strong><br/><br/><strong>3</strong> &#8211; Click &#8220;<strong>Select</strong>,&#8221; then click &#8220;<strong>19 &#8211; CAN Gateway</strong>.&#8221;<br/><br/><strong>4</strong> &#8211; Select <strong>&#8220;Installation List&#8221;</strong><br/><br/><strong>5</strong> &#8211; Check &#8220;<strong>69 &#8211; Trailer</strong>&#8221; in the list</p>

<p class="wp-block-paragraph"><strong>6</strong> &#8211; Save coding</p>

<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="313" height="294" src="https://www.vag-coding.fr/wp-content/uploads/2024/01/trailergateway.png" alt="" class="wp-image-16384" srcset="https://www.vag-coding.net/wp-content/uploads/2024/01/trailergateway.png 313w, https://www.vag-coding.net/wp-content/uploads/2024/01/trailergateway-300x282.png 300w" sizes="auto, (max-width: 313px) 100vw, 313px" /></figure>

<p class="wp-block-paragraph"><br/><strong>Line 2:</strong><br/><br/><strong>3</strong> &#8211; Click on<strong>&#8220;Select&#8221;</strong>, then click on<strong>&#8220;01 &#8211; Motor</strong>&#8220;.<br/><br/><strong>4</strong> &#8211; Click on &#8221; <strong>Coding &#8211; 07</strong>&#8221; then click on<strong>&#8220;Long Coding Helper</strong>&#8220;.<br/><br/><strong>5</strong> &#8211; Select byte &#8220;<strong>05</strong>&#8220;<br/>. Then check bit &#8220;<strong>4</strong>&#8220;: &#8220;<strong>Trailer installed</strong>&#8220;</p>

<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="483" height="226" src="https://www.vag-coding.fr/wp-content/uploads/2024/01/trailermoteur.png" alt="" class="wp-image-16385" srcset="https://www.vag-coding.net/wp-content/uploads/2024/01/trailermoteur.png 483w, https://www.vag-coding.net/wp-content/uploads/2024/01/trailermoteur-300x140.png 300w" sizes="auto, (max-width: 483px) 100vw, 483px" /></figure>

<p class="wp-block-paragraph"></p>

<p class="wp-block-paragraph"><strong>Line 3:</strong><br/><br/><strong>3</strong> &#8211; Click &#8220;<strong>Select</strong>,&#8221; then click &#8220;<strong><strong>&#8220;09 &#8211; Cent. Elect.&#8221;</strong></strong>&#8220;.<br/><br/><strong>4</strong> &#8211; Unlock <strong>SFD</strong> protection<br/><br/><strong>5</strong> &#8211; Click on<strong>“Adaptation &#8211; 10</strong>”.<br/><br/><strong>6</strong> &#8211; At the very top of this page, there is a drop-down menu.<br/>From this drop-down menu, select &#8220;<strong>Vernetzung &#8211; Anhaengeranschlussgeraet</strong>&#8220;<br/><br/><strong>7</strong> &#8211; On this same page, there is a second drop-down menu toward the bottom<br/>.<br/>From this menu, select &#8220;<strong>installed</strong>&#8221; and then confirm.</p>

<p class="wp-block-paragraph"></p>

<p class="wp-block-paragraph"><strong>Line 4:</strong><br/><br/><strong>3</strong> &#8211; Click on<strong>&#8220;Select</strong>&#8221; then click on<strong>&#8220;03 &#8211; ABS brake</strong>&#8220;.<br/><br/><strong>4</strong> &#8211; Unlock <strong>SFD</strong> protection<br/><br/><strong>5</strong> &#8211; Click on<strong>“Adaptation &#8211; 10</strong>”.<br/><br/><strong>6</strong> &#8211; At the very top of this page, there is a drop-down menu.<br/>From this drop-down menu, select &#8220;<strong>Gespannstabilisierung</strong>.&#8221;<br/><br/><strong>7</strong> &#8211; On this same page, there is a second drop-down menu located toward the bottom<br/>.<br/>From this menu, select &#8220;<strong>Active</strong>&#8221; and then confirm.</p>

<p class="wp-block-paragraph"><br/><br/><strong>Line 5:</strong><br/><br/><strong>3</strong> &#8211; Click on<strong>&#8220;Select</strong>&#8221; then click on &#8220;.<strong>13 &#8211; Auto Dist. Reg. </strong>&#8220;.<br/><br/><strong>4</strong> &#8211; Unlock <strong>SFD</strong> protection<br/><br/><strong>5</strong> &#8211; Click &#8221; <strong>Encoding &#8211; 07</strong>,&#8221; then click &#8220;<strong>Long Coding Helper</strong>&#8220;<br/><br/><strong>6</strong> &#8211; Select byte &#8220;<strong>01</strong>&#8220;<br/>Then check Bit<strong> 7</strong> &#8220;Control_module_for_towing_sensor&#8221;</p>

<p class="wp-block-paragraph"><br/><br/><strong>Line 6:</strong></p>

<p class="wp-block-paragraph"><br/><strong>3</strong> &#8211; Click &#8220;<strong>Select</strong>,&#8221; then click &#8220;<strong>3C &#8211; Lane Change</strong>.&#8221;<br/><br/><strong>4</strong> &#8211; Click on &#8221; <strong>Coding &#8211; 07</strong>&#8221; then click on<strong>&#8220;Long Coding Helper</strong>&#8220;.<br/><br/><strong>5</strong> &#8211; Select the &#8220;<strong>00</strong>&#8221; byte <br/>Then check Bit <strong>5</strong> &#8220;ECU for drawbar, with ECU for drawbar&#8221;<br/><br/><br/><br/><strong>Line 7:</strong><br/><br/><strong>3</strong> &#8211; Click &#8220;<strong>Select</strong>,&#8221; then click &#8220;<strong>6C &#8211; Rearview Camera</strong>.&#8221;<br/><br/><strong>4</strong> &#8211; Click on &#8221; <strong>Coding &#8211; 07</strong>&#8221; then click on<strong>&#8220;Long Coding Helper</strong>&#8220;.<br/><br/><strong>5</strong> &#8211; Select byte &#8220;<strong>02</strong>&#8220;<br/>Then set bit <strong>0</strong> (&#8220;equipment_ahk, installed&#8221;)<br/><br/><br/><br/><strong>Line 8:</strong><br/><br/><strong>3</strong> &#8211; Click on<strong>&#8220;Select</strong>&#8221; then click on &#8220;.<strong>A5 &#8211; Front, Sensors, Driver Assistance   </strong>&#8220;.<br/><br/><strong>4</strong> &#8211; Unlock <strong>SFD</strong> protection</p>

<p class="wp-block-paragraph"><strong>5</strong> &#8211; Click &#8221; <strong>Encoding &#8211; 07</strong>,&#8221; then click &#8220;<strong>Long Coding Helper</strong>&#8220;</p>

<p class="wp-block-paragraph">Select byte &#8220;<strong>05</strong>&#8220;</p>

<p class="wp-block-paragraph">Then set bit <strong>4</strong> (&#8220;AAG, 0 = not_coded / 1 = coded&#8221;)</p>

<p class="wp-block-paragraph"></p>

<p class="wp-block-paragraph"><strong>Line 9:</strong><br/><br/><strong>3</strong> &#8211; Click &#8220;<strong>Select</strong>,&#8221; then click &#8220;<strong><strong>69 &#8211; Trailer</strong></strong>&#8220;.<br/><br/><strong>4</strong> &#8211; Click on &#8221; <strong>Coding &#8211; 07</strong>&#8221; then click on<strong>&#8220;Long Coding Helper</strong>&#8220;.<br/><br/><strong>5</strong> &#8211; Select byte &#8220;<strong>01</strong>&#8220;<br/>Then check bits <strong>0-7</strong> &#8220;01 &#8211; Trailer Connector Diagnostics active&#8221;</p>

<p class="wp-block-paragraph">Select byte &#8220;<strong>03</strong>&#8220;<br/>Then check bits<strong> 0-7</strong> &#8220;01 &#8211; Trailer Connector Diagnostics active&#8221;</p>

<p class="wp-block-paragraph"></p>

<p class="wp-block-paragraph"><br/></p>
<button class="simplefavorite-button has-count preset" data-postid="51835" data-siteid="1" data-groupid="1" data-favoritecount="0" style="background-color:#4c9fe8;color:#000000;"><i class="sf-icon-love" style=""></i>Love<span class="simplefavorite-button-count" style="">0</span></button><p>L’article <a href="https://www.vag-coding.net/skoda/octavia-4-nx/octavia-4-nx-enable-the-trailer-hitch-retrofit/">Octavia 4 (NX) &#8211; Enable the trailer hitch (retrofit)</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></content:encoded>
					
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">51835</post-id>	</item>
		<item>
		<title>Octavia 4 (NX) &#8211; Enable Rearview Camera (Retrofit)</title>
		<link>https://www.vag-coding.net/skoda/octavia-4-nx/octavia-4-nx-enable-rearview-camera-retrofit/</link>
		
		<dc:creator><![CDATA[T0MS]]></dc:creator>
		<pubDate>Sat, 08 Aug 2026 00:36:27 +0000</pubDate>
				<category><![CDATA[Octavia 4 (NX)]]></category>
		<category><![CDATA[Camera]]></category>
		<category><![CDATA[MIB Skoda]]></category>
		<category><![CDATA[Retrofit]]></category>
		<guid isPermaLink="false">https://www.vag-coding.fr/skoda/octavia-4-nx/octavia-4-nx-enable-rearview-camera-retrofit/</guid>

					<description><![CDATA[<p>Purpose: Enables the rearview camera after it has been installed on the MIB (retrofit). SFD: Yes Procedure: 1 &#8211; Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle&#8217;s diagnostics socket. 2 &#8211; Switch on the ignition and run the VCDS program or the&#46;&#46;&#46;</p>
<p>L’article <a href="https://www.vag-coding.net/skoda/octavia-4-nx/octavia-4-nx-enable-rearview-camera-retrofit/">Octavia 4 (NX) &#8211; Enable Rearview Camera (Retrofit)</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></description>
										<content:encoded><![CDATA[
<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="600" height="400" src="https://www.vag-coding.fr/wp-content/uploads/2024/01/skoda_octavia_4.png" alt="VAG Coding VCDS ODBeleven Skoda Octavia 4 NX" class="wp-image-16841" srcset="https://www.vag-coding.net/wp-content/uploads/2024/01/skoda_octavia_4.png 600w, https://www.vag-coding.net/wp-content/uploads/2024/01/skoda_octavia_4-300x200.png 300w" sizes="auto, (max-width: 600px) 100vw, 600px" /></figure>

<p class="wp-block-paragraph"><strong>Purpose:</strong> Enables the rearview camera after it has been installed on the MIB (retrofit). <br/><br/><br/>SFD: Yes<br/><br/><strong>Procedure:</strong> <br/><strong>1</strong> &#8211; Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle&#8217;s diagnostics socket.<br/><br/><strong></strong> 2 &#8211; Switch on the ignition and run the VCDS program or the OBDeleven app.  </p>

<p class="wp-block-paragraph"><strong>Hardware upgrade :</strong></p>

<p class="wp-block-paragraph">VW Retrofit Kit: 5H9 054 634</p>

<p class="wp-block-paragraph"></p>

<p class="wp-block-paragraph"><strong>Line 1:</strong><br/><br/><strong>3</strong> &#8211; Click &#8220;<strong>Select</strong>,&#8221; then click &#8220;<strong>19 &#8211; CAN Gateway</strong>.&#8221;<br/><br/><strong></strong> 4 &#8211; Click &#8220;<strong>Coding &#8211; 07</strong>,&#8221; then click &#8220;<strong>Long Coding Helper</strong>&#8220;<br/><br/><strong>5</strong> &#8211; Select the bit: PaCo_Video_Parksystem &#8211; RVC_compact_smart</p>

<p class="wp-block-paragraph"></p>

<p class="wp-block-paragraph"><strong>Line 2:</strong><br/><br/><strong>3</strong> &#8211; Click on<strong>“Select”</strong> then click on<strong>“5F &#8211; Electr. information</strong>”.<br/><br/><strong>4</strong> &#8211; Unlock <strong>SFD</strong> protection<br/><br/><strong>5</strong> &#8211; Click on<strong>“Adaptation &#8211; 10</strong>”.<br/><br/><strong>6</strong> &#8211; At the very top of this page, there is a drop-down menu.<br/>From this drop-down menu, select &#8220;<strong><strong>Car Function List BAP &#8211; VPS_0x0B</strong></strong>&#8220;<br/><br/><strong>7</strong> &#8211; On this same page, there is a second drop-down menu at the bottom<br/>of the page.<br/>On this menu, choose the<strong>“active</strong>” value.</p>

<p class="wp-block-paragraph"><strong>Line 3:</strong><br/><br/><strong>3</strong> &#8211; Click on<strong>“Select”</strong> then click on<strong>“5F &#8211; Electr. information</strong>”.<br/><br/><strong>4</strong> &#8211; Unlock <strong>SFD</strong> protection<br/><br/><strong>5</strong> &#8211; Click on<strong>“Adaptation &#8211; 10</strong>”.<br/><br/><strong>6</strong> &#8211; At the very top of this page, there is a drop-down menu.<br/>From this drop-down menu, select &#8220;<strong><strong><strong>Car Function List BAP &#8211; VPS_0x0B_msg_bus</strong></strong></strong>&#8220;<br/><br/><strong>7</strong> &#8211; On this same page, there is a second drop-down menu further down<br/>.<br/>From this menu, select the value &#8220;<strong><strong>can_fas</strong></strong>&#8220;</p>

<p class="wp-block-paragraph"><strong>Line 4:</strong><br/><br/><strong>3</strong> &#8211; Click on<strong>“Select”</strong> then click on<strong>“5F &#8211; Electr. information</strong>”.<br/><br/><strong>4</strong> &#8211; Unlock <strong>SFD</strong> protection<br/><br/><strong>5</strong> &#8211; Click on<strong>“Adaptation &#8211; 10</strong>”.<br/><br/><strong>6</strong> &#8211; At the very top of this page, there is a drop-down menu.<br/>From this drop-down menu, select &#8220;<strong><strong><strong>function_configuration_unit</strong></strong>&#8211; RVC_video_input</strong>&#8220;<br/><br/><strong>7</strong> &#8211; On this same page, there is a second drop-down menu further down<br/>.<br/>From this menu, select the value &#8220;<strong><strong>ethernet</strong></strong>&#8220;</p>

<p class="wp-block-paragraph"><strong>Line 5:</strong><br/><br/><strong>3</strong> &#8211; Click on<strong>“Select”</strong> then click on<strong>“5F &#8211; Electr. information</strong>”.<br/><br/><strong>4</strong> &#8211; Unlock <strong>SFD</strong> protection<br/><br/><strong>5</strong> &#8211; Click on<strong>“Adaptation &#8211; 10</strong>”.<br/><br/><strong>6</strong> &#8211; At the very top of this page, there is a drop-down menu.<br/>From this drop-down menu, select &#8220;<strong><strong><strong>parkingsystem_video_input</strong></strong>&#8211; carrier_resolution</strong>&#8220;<br/><br/><strong>7</strong> &#8211; On this same page, there is a second drop-down menu further down<br/>.<br/>From this menu, select the value &#8220;<strong><strong>1392&#215;656</strong></strong>&#8220;</p>

<p class="wp-block-paragraph"><strong>Line 6:</strong><br/><br/><strong>3</strong> &#8211; Click on<strong>“Select”</strong> then click on<strong>“5F &#8211; Electr. information</strong>”.<br/><br/><strong>4</strong> &#8211; Click on<strong>“Security Access &#8211; 16</strong>” then enter the code<strong>“20103</strong>”.<br/><br/><strong>5</strong> &#8211; Click on<strong>“Adaptation &#8211; 10</strong>”.<br/><br/><strong>6</strong> &#8211; At the very top of this page, there is a drop-down menu.<br/>From this drop-down menu, select &#8220;<strong>function_configuration_rvc &#8211; rvc_low_black_screen_trunk_open</strong>&#8220;<br/><br/><strong>7</strong> &#8211; On this same page, there is a second drop-down menu, but further down<br/>.<br/>From this menu, select the value &#8220;<strong><strong>not_active</strong></strong>&#8220;</p>

<p class="wp-block-paragraph"><strong>Line 7:</strong><br/><br/><strong>3</strong> &#8211; Click on<strong>“Select”</strong> then click on<strong>“5F &#8211; Electr. information</strong>”.<br/><br/><strong>4</strong> &#8211; Unlock <strong>SFD</strong> protection<br/><br/><strong>5</strong> &#8211; Click on<strong>“Adaptation &#8211; 10</strong>”.<br/><br/><strong>6</strong> &#8211; At the very top of this page, there is a drop-down menu.<br/>From this drop-down menu, select &#8220;<strong><strong><strong><strong>function_configuration_rvc</strong></strong></strong>&#8211; rvc_low_failsafe</strong>&#8220;<br/><br/><strong>7</strong> &#8211; On this same page, there is a second drop-down menu, but further down<br/>.<br/>From this menu, select the value &#8220;<strong><strong>not_active</strong></strong>&#8220;</p>

<p class="wp-block-paragraph"><strong>Line 8:</strong><br/><br/><strong>3</strong> &#8211; Click on<strong>“Select”</strong> then click on<strong>“5F &#8211; Electr. information</strong>”.<br/><br/><strong>4</strong> &#8211; Unlock <strong>SFD</strong> protection<br/><br/><strong>5</strong> &#8211; Click on<strong>“Adaptation &#8211; 10</strong>”.<br/><br/><strong>6</strong> &#8211; At the very top of this page, there is a drop-down menu.<br/>From this drop-down menu, select &#8220;<strong><strong><strong><strong>function_configuration_rvc</strong></strong></strong>&#8211; rvc_low_black_screen_velocity_threshold</strong>&#8220;<br/><br/><strong>7</strong> &#8211; On this same page, there is a second drop-down menu, but further down<br/>.<br/>From this menu, select the value &#8220;<strong><strong>not_active</strong></strong>&#8220;</p>

<p class="wp-block-paragraph"><strong>Line 9:</strong><br/><br/><strong>3</strong> &#8211; Click on<strong>“Select”</strong> then click on<strong>“5F &#8211; Electr. information</strong>”.<br/><br/><strong>4</strong> &#8211; Click on<strong>“Security Access &#8211; 16</strong>” then enter the code<strong>“20103</strong>”.<br/><br/><strong>5</strong> &#8211; Click on<strong>“Adaptation &#8211; 10</strong>”.<br/><br/><strong>6</strong> &#8211; At the very top of this page, there is a drop-down menu.<br/>From this drop-down menu, select &#8220;<strong><strong><strong><strong>function_configuration_rvc</strong></strong></strong>&#8211; rear_view_low_rvc</strong>&#8220;<br/><br/><strong>7</strong> &#8211; On this same page, there is a second drop-down menu, but further down<br/>.<br/>From this menu, select the value &#8220;<strong><strong>not_active</strong></strong>&#8220;</p>

<p class="wp-block-paragraph"><strong>Line 10:</strong><br/><br/><strong>3</strong> &#8211; Click on<strong>“Select”</strong> then click on<strong>“5F &#8211; Electr. information</strong>”.<br/><br/><strong>4</strong> &#8211; Unlock <strong>SFD</strong> protection<br/><br/><strong>5</strong> &#8211; Click on<strong>“Adaptation &#8211; 10</strong>”.<br/><br/><strong>6</strong> &#8211; At the very top of this page, there is a drop-down menu.<br/>From this drop-down menu, select &#8220;<strong><strong><strong><strong>function_configuration_rvc</strong></strong></strong>&#8211; rvc_low_lid_close_delay_time</strong>&#8220;<br/><br/><strong>7</strong> &#8211; On this same page, there is a second drop-down menu located toward the bottom<br/>.<br/>From this menu, select the value &#8220;<strong><strong>0 [ONE]_s</strong></strong>&#8220;</p>

<p class="wp-block-paragraph"><strong>Line 11:</strong><br/><br/><strong>3</strong> &#8211; Click on<strong>“Select”</strong> then click on<strong>“5F &#8211; Electr. information</strong>”.<br/><br/><strong>4</strong> &#8211; Unlock <strong>SFD</strong> protection<br/><br/><strong>5</strong> &#8211; Click on<strong>“Adaptation &#8211; 10</strong>”.<br/><br/><strong>6</strong> &#8211; At the very top of this page, there is a drop-down menu.<br/>From this drop-down menu, select &#8220;<strong><strong><strong><strong>function_configuration_rvc</strong></strong></strong>&#8211; rvc_low_videofailure_detection_time</strong>&#8220;<br/><br/><strong>7</strong> &#8211; On this same page, there is a second drop-down menu, but further down<br/>.<br/>From this menu, select the value &#8220;<strong><strong>0</strong></strong>&#8220;</p>
<button class="simplefavorite-button has-count preset" data-postid="51839" data-siteid="1" data-groupid="1" data-favoritecount="0" style="background-color:#4c9fe8;color:#000000;"><i class="sf-icon-love" style=""></i>Love<span class="simplefavorite-button-count" style="">0</span></button><p>L’article <a href="https://www.vag-coding.net/skoda/octavia-4-nx/octavia-4-nx-enable-rearview-camera-retrofit/">Octavia 4 (NX) &#8211; Enable Rearview Camera (Retrofit)</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></content:encoded>
					
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">51839</post-id>	</item>
		<item>
		<title>Formentor (KM7) &#8211; Enable the trailer hitch (retrofit)</title>
		<link>https://www.vag-coding.net/seat-cupra/formentor-km7/formentor-km7-enable-the-trailer-hitch-retrofit/</link>
		
		<dc:creator><![CDATA[T0MS]]></dc:creator>
		<pubDate>Sat, 08 Aug 2026 00:33:51 +0000</pubDate>
				<category><![CDATA[Formentor (KM7)]]></category>
		<category><![CDATA[Retrofit]]></category>
		<guid isPermaLink="false">https://www.vag-coding.fr/seat-cupra/formentor-km7/formentor-km7-enable-the-trailer-hitch-retrofit/</guid>

					<description><![CDATA[<p>Purpose: Enables the installation of a retrofit trailer hitch (trailer/towbar retrofit). Warning!! Depending on the modules you have installed, there are up to 9 coding lines to complete here; most control units require a long coding process with a &#8220;trailer&#8221; that must be enabled! SFD: yes Proceed : 1 &#8211; Engine off, ignition off, connect&#46;&#46;&#46;</p>
<p>L’article <a href="https://www.vag-coding.net/seat-cupra/formentor-km7/formentor-km7-enable-the-trailer-hitch-retrofit/">Formentor (KM7) &#8211; Enable the trailer hitch (retrofit)</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></description>
										<content:encoded><![CDATA[
<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="1200" height="600" src="https://www.vag-coding.fr/wp-content/uploads/2024/05/CUPRA-FORMENTOR-KM7.png" alt="VAG Coding VCDS ODBeleven Cupra Formentor KM7" class="wp-image-19531" srcset="https://www.vag-coding.net/wp-content/uploads/2024/05/CUPRA-FORMENTOR-KM7.png 1200w, https://www.vag-coding.net/wp-content/uploads/2024/05/CUPRA-FORMENTOR-KM7-300x150.png 300w, https://www.vag-coding.net/wp-content/uploads/2024/05/CUPRA-FORMENTOR-KM7-1024x512.png 1024w, https://www.vag-coding.net/wp-content/uploads/2024/05/CUPRA-FORMENTOR-KM7-768x384.png 768w, https://www.vag-coding.net/wp-content/uploads/2024/05/CUPRA-FORMENTOR-KM7-600x300.png 600w" sizes="auto, (max-width: 1200px) 100vw, 1200px" /></figure>

<p class="wp-block-paragraph"><strong>Purpose:</strong> Enables the installation of a retrofit trailer hitch (trailer/towbar retrofit).  </p>

<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="591" height="327" src="https://www.vag-coding.fr/wp-content/uploads/2024/01/Capture-decran-2024-01-09-215831.png" alt="" class="wp-image-16391" srcset="https://www.vag-coding.net/wp-content/uploads/2024/01/Capture-decran-2024-01-09-215831.png 591w, https://www.vag-coding.net/wp-content/uploads/2024/01/Capture-decran-2024-01-09-215831-300x166.png 300w" sizes="auto, (max-width: 591px) 100vw, 591px" /></figure>

<p class="wp-block-paragraph"><strong>Warning!! Depending on the modules you have installed, there are up to 9 coding lines to complete here; most control units require a long coding process with a &#8220;trailer&#8221; that must be enabled!   </strong><br/><br/>SFD: yes<br/><br/><strong>Proceed :</strong> <br/><strong>1</strong> &#8211; Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle&#8217;s diagnostic socket or OBDeleven box.<br/><br/><strong>2</strong> &#8211; Switch on the ignition and run the VCDS program.  </p>

<p class="wp-block-paragraph"><br/><br/><strong>Line 1:</strong><br/><br/><strong>3</strong> &#8211; Click &#8220;<strong>Select</strong>,&#8221; then click &#8220;<strong>19 &#8211; CAN Gateway</strong>.&#8221;<br/><br/><strong>4</strong> &#8211; Select <strong>&#8220;Installation List&#8221;</strong><br/><br/><strong>5</strong> &#8211; Check &#8220;<strong>69 &#8211; Trailer</strong>&#8221; in the list</p>

<p class="wp-block-paragraph"><strong>6</strong> &#8211; Save coding</p>

<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="313" height="294" src="https://www.vag-coding.fr/wp-content/uploads/2024/01/trailergateway.png" alt="" class="wp-image-16384" srcset="https://www.vag-coding.net/wp-content/uploads/2024/01/trailergateway.png 313w, https://www.vag-coding.net/wp-content/uploads/2024/01/trailergateway-300x282.png 300w" sizes="auto, (max-width: 313px) 100vw, 313px" /></figure>

<p class="wp-block-paragraph"><br/><strong>Line 2:</strong><br/><br/><strong>3</strong> &#8211; Click on<strong>&#8220;Select&#8221;</strong>, then click on<strong>&#8220;01 &#8211; Motor</strong>&#8220;.<br/><br/><strong>4</strong> &#8211; Click on &#8221; <strong>Coding &#8211; 07</strong>&#8221; then click on<strong>&#8220;Long Coding Helper</strong>&#8220;.<br/><br/><strong>5</strong> &#8211; Select byte &#8220;<strong>05</strong>&#8220;<br/>. Then check bit &#8220;<strong>4</strong>&#8220;: &#8220;<strong>Trailer installed</strong>&#8220;</p>

<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="483" height="226" src="https://www.vag-coding.fr/wp-content/uploads/2024/01/trailermoteur.png" alt="" class="wp-image-16385" srcset="https://www.vag-coding.net/wp-content/uploads/2024/01/trailermoteur.png 483w, https://www.vag-coding.net/wp-content/uploads/2024/01/trailermoteur-300x140.png 300w" sizes="auto, (max-width: 483px) 100vw, 483px" /></figure>

<p class="wp-block-paragraph"></p>

<p class="wp-block-paragraph"><strong>Line 3:</strong><br/><br/><strong>3</strong> &#8211; Click &#8220;<strong>Select</strong>,&#8221; then click &#8220;<strong><strong>&#8220;09 &#8211; Cent. Elect.&#8221;</strong></strong>&#8220;.<br/><br/><strong>4</strong> &#8211; Unlock <strong>SFD</strong> protection<br/><br/><strong>5</strong> &#8211; Click on<strong>“Adaptation &#8211; 10</strong>”.<br/><br/><strong>6</strong> &#8211; At the very top of this page, there is a drop-down menu.<br/>From this drop-down menu, select &#8220;<strong>Vernetzung &#8211; Anhaengeranschlussgeraet</strong>&#8220;<br/><br/><strong>7</strong> &#8211; On this same page, there is a second drop-down menu toward the bottom<br/>.<br/>From this menu, select &#8220;<strong>installed</strong>&#8221; and then confirm.</p>

<p class="wp-block-paragraph"></p>

<p class="wp-block-paragraph"><strong>Line 4:</strong><br/><br/><strong>3</strong> &#8211; Click on<strong>&#8220;Select</strong>&#8221; then click on<strong>&#8220;03 &#8211; ABS brake</strong>&#8220;.<br/><br/><strong>4</strong> &#8211; Unlock <strong>SFD</strong> protection<br/><br/><strong>5</strong> &#8211; Click on<strong>“Adaptation &#8211; 10</strong>”.<br/><br/><strong>6</strong> &#8211; At the very top of this page, there is a drop-down menu.<br/>From this drop-down menu, select &#8220;<strong>Gespannstabilisierung</strong>.&#8221;<br/><br/><strong>7</strong> &#8211; On this same page, there is a second drop-down menu located toward the bottom<br/>.<br/>From this menu, select &#8220;<strong>Active</strong>&#8221; and then confirm.</p>

<p class="wp-block-paragraph"><br/><br/><strong>Line 5:</strong><br/><br/><strong>3</strong> &#8211; Click on<strong>&#8220;Select</strong>&#8221; then click on &#8220;.<strong>13 &#8211; Auto Dist. Reg. </strong>&#8220;.<br/><br/><strong>4</strong> &#8211; Unlock <strong>SFD</strong> protection<br/><br/><strong>5</strong> &#8211; Click &#8221; <strong>Encoding &#8211; 07</strong>,&#8221; then click &#8220;<strong>Long Coding Helper</strong>&#8220;<br/><br/><strong>6</strong> &#8211; Select byte &#8220;<strong>01</strong>&#8220;<br/>Then check Bit<strong> 7</strong> &#8220;Control_module_for_towing_sensor&#8221;</p>

<p class="wp-block-paragraph"><br/><br/><strong>Line 6:</strong></p>

<p class="wp-block-paragraph"><br/><strong>3</strong> &#8211; Click &#8220;<strong>Select</strong>,&#8221; then click &#8220;<strong>3C &#8211; Lane Change</strong>.&#8221;<br/><br/><strong>4</strong> &#8211; Click on &#8221; <strong>Coding &#8211; 07</strong>&#8221; then click on<strong>&#8220;Long Coding Helper</strong>&#8220;.<br/><br/><strong>5</strong> &#8211; Select the &#8220;<strong>00</strong>&#8221; byte <br/>Then check Bit <strong>5</strong> &#8220;ECU for drawbar, with ECU for drawbar&#8221;<br/><br/><br/><br/><strong>Line 7:</strong><br/><br/><strong>3</strong> &#8211; Click &#8220;<strong>Select</strong>,&#8221; then click &#8220;<strong>6C &#8211; Rearview Camera</strong>.&#8221;<br/><br/><strong>4</strong> &#8211; Click on &#8221; <strong>Coding &#8211; 07</strong>&#8221; then click on<strong>&#8220;Long Coding Helper</strong>&#8220;.<br/><br/><strong>5</strong> &#8211; Select byte &#8220;<strong>02</strong>&#8220;<br/>Then set bit <strong>0</strong> (&#8220;equipment_ahk, installed&#8221;)<br/><br/><br/><br/><strong>Line 8:</strong><br/><br/><strong>3</strong> &#8211; Click on<strong>&#8220;Select</strong>&#8221; then click on &#8220;.<strong>A5 &#8211; Front, Sensors, Driver Assistance   </strong>&#8220;.<br/><br/><strong>4</strong> &#8211; Unlock <strong>SFD</strong> protection</p>

<p class="wp-block-paragraph"><strong>5</strong> &#8211; Click &#8221; <strong>Encoding &#8211; 07</strong>,&#8221; then click &#8220;<strong>Long Coding Helper</strong>&#8220;</p>

<p class="wp-block-paragraph">Select byte &#8220;<strong>05</strong>&#8220;</p>

<p class="wp-block-paragraph">Then set bit <strong>4</strong> (&#8220;AAG, 0 = not_coded / 1 = coded&#8221;)</p>

<p class="wp-block-paragraph"></p>

<p class="wp-block-paragraph"><strong>Line 9:</strong><br/><br/><strong>3</strong> &#8211; Click &#8220;<strong>Select</strong>,&#8221; then click &#8220;<strong><strong>69 &#8211; Trailer</strong></strong>&#8220;.<br/><br/><strong>4</strong> &#8211; Click on &#8221; <strong>Coding &#8211; 07</strong>&#8221; then click on<strong>&#8220;Long Coding Helper</strong>&#8220;.<br/><br/><strong>5</strong> &#8211; Select byte &#8220;<strong>01</strong>&#8220;<br/>Then check bits <strong>0-7</strong> &#8220;01 &#8211; Trailer Connector Diagnostics active&#8221;</p>

<p class="wp-block-paragraph">Select byte &#8220;<strong>03</strong>&#8220;<br/>Then check bits<strong> 0-7</strong> &#8220;01 &#8211; Trailer Connector Diagnostics active&#8221;</p>

<p class="wp-block-paragraph"></p>

<p class="wp-block-paragraph"><br/></p>
<button class="simplefavorite-button has-count preset" data-postid="51845" data-siteid="1" data-groupid="1" data-favoritecount="0" style="background-color:#4c9fe8;color:#000000;"><i class="sf-icon-love" style=""></i>Love<span class="simplefavorite-button-count" style="">0</span></button><p>L’article <a href="https://www.vag-coding.net/seat-cupra/formentor-km7/formentor-km7-enable-the-trailer-hitch-retrofit/">Formentor (KM7) &#8211; Enable the trailer hitch (retrofit)</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></content:encoded>
					
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">51845</post-id>	</item>
		<item>
		<title>Formentor (KM7) &#8211; Activate Rearview Camera (Retrofit)</title>
		<link>https://www.vag-coding.net/seat-cupra/formentor-km7/formentor-km7-activate-rearview-camera-retrofit/</link>
		
		<dc:creator><![CDATA[T0MS]]></dc:creator>
		<pubDate>Sat, 08 Aug 2026 00:33:13 +0000</pubDate>
				<category><![CDATA[Formentor (KM7)]]></category>
		<category><![CDATA[Camera]]></category>
		<category><![CDATA[MIB Seat]]></category>
		<category><![CDATA[Retrofit]]></category>
		<guid isPermaLink="false">https://www.vag-coding.fr/seat-cupra/formentor-km7/formentor-km7-activate-rearview-camera-retrofit/</guid>

					<description><![CDATA[<p>Purpose: Enables the rearview camera after it has been installed on the MIB (retrofit). SFD: Yes Procedure: 1 &#8211; Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle&#8217;s diagnostics socket. 2 &#8211; Switch on the ignition and run the VCDS program or the&#46;&#46;&#46;</p>
<p>L’article <a href="https://www.vag-coding.net/seat-cupra/formentor-km7/formentor-km7-activate-rearview-camera-retrofit/">Formentor (KM7) &#8211; Activate Rearview Camera (Retrofit)</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></description>
										<content:encoded><![CDATA[
<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="1200" height="600" src="https://www.vag-coding.fr/wp-content/uploads/2024/05/CUPRA-FORMENTOR-KM7.png" alt="VAG Coding VCDS ODBeleven Cupra Formentor KM7" class="wp-image-19531" srcset="https://www.vag-coding.net/wp-content/uploads/2024/05/CUPRA-FORMENTOR-KM7.png 1200w, https://www.vag-coding.net/wp-content/uploads/2024/05/CUPRA-FORMENTOR-KM7-300x150.png 300w, https://www.vag-coding.net/wp-content/uploads/2024/05/CUPRA-FORMENTOR-KM7-1024x512.png 1024w, https://www.vag-coding.net/wp-content/uploads/2024/05/CUPRA-FORMENTOR-KM7-768x384.png 768w, https://www.vag-coding.net/wp-content/uploads/2024/05/CUPRA-FORMENTOR-KM7-600x300.png 600w" sizes="auto, (max-width: 1200px) 100vw, 1200px" /></figure>

<p class="wp-block-paragraph"><strong>Purpose:</strong> Enables the rearview camera after it has been installed on the MIB (retrofit). <br/><br/><br/>SFD: Yes<br/><br/><strong>Procedure:</strong> <br/><strong>1</strong> &#8211; Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle&#8217;s diagnostics socket.<br/><br/><strong></strong> 2 &#8211; Switch on the ignition and run the VCDS program or the OBDeleven app.  </p>

<p class="wp-block-paragraph"><strong>Hardware upgrade :</strong></p>

<p class="wp-block-paragraph">VW Retrofit Kit: 5H9 054 634</p>

<p class="wp-block-paragraph"></p>

<p class="wp-block-paragraph"><strong>Line 1:</strong><br/><br/><strong>3</strong> &#8211; Click &#8220;<strong>Select</strong>,&#8221; then click &#8220;<strong>19 &#8211; CAN Gateway</strong>.&#8221;<br/><br/><strong></strong> 4 &#8211; Click &#8220;<strong>Coding &#8211; 07</strong>,&#8221; then click &#8220;<strong>Long Coding Helper</strong>&#8220;<br/><br/><strong>5</strong> &#8211; Select the bit: PaCo_Video_Parksystem &#8211; RVC_compact_smart</p>

<p class="wp-block-paragraph"></p>

<p class="wp-block-paragraph"><strong>Line 2:</strong><br/><br/><strong>3</strong> &#8211; Click on<strong>“Select”</strong> then click on<strong>“5F &#8211; Electr. information</strong>”.<br/><br/><strong>4</strong> &#8211; Unlock <strong>SFD</strong> protection<br/><br/><strong>5</strong> &#8211; Click on<strong>“Adaptation &#8211; 10</strong>”.<br/><br/><strong>6</strong> &#8211; At the very top of this page, there is a drop-down menu.<br/>From this drop-down menu, select &#8220;<strong><strong>Car Function List BAP &#8211; VPS_0x0B</strong></strong>&#8220;<br/><br/><strong>7</strong> &#8211; On this same page, there is a second drop-down menu at the bottom<br/>of the page.<br/>On this menu, choose the<strong>“active</strong>” value.</p>

<p class="wp-block-paragraph"><strong>Line 3:</strong><br/><br/><strong>3</strong> &#8211; Click on<strong>“Select”</strong> then click on<strong>“5F &#8211; Electr. information</strong>”.<br/><br/><strong>4</strong> &#8211; Unlock <strong>SFD</strong> protection<br/><br/><strong>5</strong> &#8211; Click on<strong>“Adaptation &#8211; 10</strong>”.<br/><br/><strong>6</strong> &#8211; At the very top of this page, there is a drop-down menu.<br/>From this drop-down menu, select &#8220;<strong><strong><strong>Car Function List BAP &#8211; VPS_0x0B_msg_bus</strong></strong></strong>&#8220;<br/><br/><strong>7</strong> &#8211; On this same page, there is a second drop-down menu further down<br/>.<br/>From this menu, select the value &#8220;<strong><strong>can_fas</strong></strong>&#8220;</p>

<p class="wp-block-paragraph"><strong>Line 4:</strong><br/><br/><strong>3</strong> &#8211; Click on<strong>“Select”</strong> then click on<strong>“5F &#8211; Electr. information</strong>”.<br/><br/><strong>4</strong> &#8211; Unlock <strong>SFD</strong> protection<br/><br/><strong>5</strong> &#8211; Click on<strong>“Adaptation &#8211; 10</strong>”.<br/><br/><strong>6</strong> &#8211; At the very top of this page, there is a drop-down menu.<br/>From this drop-down menu, select &#8220;<strong><strong><strong>function_configuration_unit</strong></strong>&#8211; RVC_video_input</strong>&#8220;<br/><br/><strong>7</strong> &#8211; On this same page, there is a second drop-down menu further down<br/>.<br/>From this menu, select the value &#8220;<strong><strong>ethernet</strong></strong>&#8220;</p>

<p class="wp-block-paragraph"><strong>Line 5:</strong><br/><br/><strong>3</strong> &#8211; Click on<strong>“Select”</strong> then click on<strong>“5F &#8211; Electr. information</strong>”.<br/><br/><strong>4</strong> &#8211; Unlock <strong>SFD</strong> protection<br/><br/><strong>5</strong> &#8211; Click on<strong>“Adaptation &#8211; 10</strong>”.<br/><br/><strong>6</strong> &#8211; At the very top of this page, there is a drop-down menu.<br/>From this drop-down menu, select &#8220;<strong><strong><strong>parkingsystem_video_input</strong></strong>&#8211; carrier_resolution</strong>&#8220;<br/><br/><strong>7</strong> &#8211; On this same page, there is a second drop-down menu further down<br/>.<br/>From this menu, select the value &#8220;<strong><strong>1392&#215;656</strong></strong>&#8220;</p>

<p class="wp-block-paragraph"><strong>Line 6:</strong><br/><br/><strong>3</strong> &#8211; Click on<strong>“Select”</strong> then click on<strong>“5F &#8211; Electr. information</strong>”.<br/><br/><strong>4</strong> &#8211; Click on<strong>“Security Access &#8211; 16</strong>” then enter the code<strong>“20103</strong>”.<br/><br/><strong>5</strong> &#8211; Click on<strong>“Adaptation &#8211; 10</strong>”.<br/><br/><strong>6</strong> &#8211; At the very top of this page, there is a drop-down menu.<br/>From this drop-down menu, select &#8220;<strong>function_configuration_rvc &#8211; rvc_low_black_screen_trunk_open</strong>&#8220;<br/><br/><strong>7</strong> &#8211; On this same page, there is a second drop-down menu, but further down<br/>.<br/>From this menu, select the value &#8220;<strong><strong>not_active</strong></strong>&#8220;</p>

<p class="wp-block-paragraph"><strong>Line 7:</strong><br/><br/><strong>3</strong> &#8211; Click on<strong>“Select”</strong> then click on<strong>“5F &#8211; Electr. information</strong>”.<br/><br/><strong>4</strong> &#8211; Unlock <strong>SFD</strong> protection<br/><br/><strong>5</strong> &#8211; Click on<strong>“Adaptation &#8211; 10</strong>”.<br/><br/><strong>6</strong> &#8211; At the very top of this page, there is a drop-down menu.<br/>From this drop-down menu, select &#8220;<strong><strong><strong><strong>function_configuration_rvc</strong></strong></strong>&#8211; rvc_low_failsafe</strong>&#8220;<br/><br/><strong>7</strong> &#8211; On this same page, there is a second drop-down menu, but further down<br/>.<br/>From this menu, select the value &#8220;<strong><strong>not_active</strong></strong>&#8220;</p>

<p class="wp-block-paragraph"><strong>Line 8:</strong><br/><br/><strong>3</strong> &#8211; Click on<strong>“Select”</strong> then click on<strong>“5F &#8211; Electr. information</strong>”.<br/><br/><strong>4</strong> &#8211; Unlock <strong>SFD</strong> protection<br/><br/><strong>5</strong> &#8211; Click on<strong>“Adaptation &#8211; 10</strong>”.<br/><br/><strong>6</strong> &#8211; At the very top of this page, there is a drop-down menu.<br/>From this drop-down menu, select &#8220;<strong><strong><strong><strong>function_configuration_rvc</strong></strong></strong>&#8211; rvc_low_black_screen_velocity_threshold</strong>&#8220;<br/><br/><strong>7</strong> &#8211; On this same page, there is a second drop-down menu, but further down<br/>.<br/>From this menu, select the value &#8220;<strong><strong>not_active</strong></strong>&#8220;</p>

<p class="wp-block-paragraph"><strong>Line 9:</strong><br/><br/><strong>3</strong> &#8211; Click on<strong>“Select”</strong> then click on<strong>“5F &#8211; Electr. information</strong>”.<br/><br/><strong>4</strong> &#8211; Click on<strong>“Security Access &#8211; 16</strong>” then enter the code<strong>“20103</strong>”.<br/><br/><strong>5</strong> &#8211; Click on<strong>“Adaptation &#8211; 10</strong>”.<br/><br/><strong>6</strong> &#8211; At the very top of this page, there is a drop-down menu.<br/>From this drop-down menu, select &#8220;<strong><strong><strong><strong>function_configuration_rvc</strong></strong></strong>&#8211; rear_view_low_rvc</strong>&#8220;<br/><br/><strong>7</strong> &#8211; On this same page, there is a second drop-down menu, but further down<br/>.<br/>From this menu, select the value &#8220;<strong><strong>not_active</strong></strong>&#8220;</p>

<p class="wp-block-paragraph"><strong>Line 10:</strong><br/><br/><strong>3</strong> &#8211; Click on<strong>“Select”</strong> then click on<strong>“5F &#8211; Electr. information</strong>”.<br/><br/><strong>4</strong> &#8211; Unlock <strong>SFD</strong> protection<br/><br/><strong>5</strong> &#8211; Click on<strong>“Adaptation &#8211; 10</strong>”.<br/><br/><strong>6</strong> &#8211; At the very top of this page, there is a drop-down menu.<br/>From this drop-down menu, select &#8220;<strong><strong><strong><strong>function_configuration_rvc</strong></strong></strong>&#8211; rvc_low_lid_close_delay_time</strong>&#8220;<br/><br/><strong>7</strong> &#8211; On this same page, there is a second drop-down menu located toward the bottom<br/>.<br/>From this menu, select the value &#8220;<strong><strong>0 [ONE]_s</strong></strong>&#8220;</p>

<p class="wp-block-paragraph"><strong>Line 11:</strong><br/><br/><strong>3</strong> &#8211; Click on<strong>“Select”</strong> then click on<strong>“5F &#8211; Electr. information</strong>”.<br/><br/><strong>4</strong> &#8211; Unlock <strong>SFD</strong> protection<br/><br/><strong>5</strong> &#8211; Click on<strong>“Adaptation &#8211; 10</strong>”.<br/><br/><strong>6</strong> &#8211; At the very top of this page, there is a drop-down menu.<br/>From this drop-down menu, select &#8220;<strong><strong><strong><strong>function_configuration_rvc</strong></strong></strong>&#8211; rvc_low_videofailure_detection_time</strong>&#8220;<br/><br/><strong>7</strong> &#8211; On this same page, there is a second drop-down menu, but further down<br/>.<br/>From this menu, select the value &#8220;<strong><strong>0</strong></strong>&#8220;</p>
<button class="simplefavorite-button has-count preset" data-postid="51851" data-siteid="1" data-groupid="1" data-favoritecount="0" style="background-color:#4c9fe8;color:#000000;"><i class="sf-icon-love" style=""></i>Love<span class="simplefavorite-button-count" style="">0</span></button><p>L’article <a href="https://www.vag-coding.net/seat-cupra/formentor-km7/formentor-km7-activate-rearview-camera-retrofit/">Formentor (KM7) &#8211; Activate Rearview Camera (Retrofit)</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></content:encoded>
					
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">51851</post-id>	</item>
		<item>
		<title>Leon 4 (KL) &#8211; Enable the trailer hitch (retrofit)</title>
		<link>https://www.vag-coding.net/seat-cupra/leon-4-kl/leon-4-kl-enable-the-trailer-hitch-retrofit/</link>
		
		<dc:creator><![CDATA[T0MS]]></dc:creator>
		<pubDate>Sat, 08 Aug 2026 00:30:28 +0000</pubDate>
				<category><![CDATA[Leon 4 (KL)]]></category>
		<category><![CDATA[Retrofit]]></category>
		<guid isPermaLink="false">https://www.vag-coding.fr/seat-cupra/leon-4-kl/leon-4-kl-enable-the-trailer-hitch-retrofit/</guid>

					<description><![CDATA[<p>Purpose: Enables the installation of a retrofit trailer hitch (trailer/towbar retrofit). Warning!! Depending on the modules you have installed, there are up to 9 coding lines to complete here; most control units require a long coding process with a &#8220;trailer&#8221; that must be enabled! SFD: yes Proceed : 1 &#8211; Engine off, ignition off, connect&#46;&#46;&#46;</p>
<p>L’article <a href="https://www.vag-coding.net/seat-cupra/leon-4-kl/leon-4-kl-enable-the-trailer-hitch-retrofit/">Leon 4 (KL) &#8211; Enable the trailer hitch (retrofit)</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></description>
										<content:encoded><![CDATA[
<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="600" height="400" src="https://www.vag-coding.fr/wp-content/uploads/2023/03/seat_leon_kl.png" alt="VAG Coding VCDS ODBeleven Seat Leon 4 KL" class="wp-image-8541" srcset="https://www.vag-coding.net/wp-content/uploads/2023/03/seat_leon_kl.png 600w, https://www.vag-coding.net/wp-content/uploads/2023/03/seat_leon_kl-300x200.png 300w" sizes="auto, (max-width: 600px) 100vw, 600px" /></figure>

<p class="wp-block-paragraph"><strong>Purpose:</strong> Enables the installation of a retrofit trailer hitch (trailer/towbar retrofit).  </p>

<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="591" height="327" src="https://www.vag-coding.fr/wp-content/uploads/2024/01/Capture-decran-2024-01-09-215831.png" alt="" class="wp-image-16391" srcset="https://www.vag-coding.net/wp-content/uploads/2024/01/Capture-decran-2024-01-09-215831.png 591w, https://www.vag-coding.net/wp-content/uploads/2024/01/Capture-decran-2024-01-09-215831-300x166.png 300w" sizes="auto, (max-width: 591px) 100vw, 591px" /></figure>

<p class="wp-block-paragraph"><strong>Warning!! Depending on the modules you have installed, there are up to 9 coding lines to complete here; most control units require a long coding process with a &#8220;trailer&#8221; that must be enabled!   </strong><br/><br/>SFD: yes<br/><br/><strong>Proceed :</strong> <br/><strong>1</strong> &#8211; Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle&#8217;s diagnostic socket or OBDeleven box.<br/><br/><strong>2</strong> &#8211; Switch on the ignition and run the VCDS program.  </p>

<p class="wp-block-paragraph"><br/><br/><strong>Line 1:</strong><br/><br/><strong>3</strong> &#8211; Click &#8220;<strong>Select</strong>,&#8221; then click &#8220;<strong>19 &#8211; CAN Gateway</strong>.&#8221;<br/><br/><strong>4</strong> &#8211; Select <strong>&#8220;Installation List&#8221;</strong><br/><br/><strong>5</strong> &#8211; Check &#8220;<strong>69 &#8211; Trailer</strong>&#8221; in the list</p>

<p class="wp-block-paragraph"><strong>6</strong> &#8211; Save coding</p>

<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="313" height="294" src="https://www.vag-coding.fr/wp-content/uploads/2024/01/trailergateway.png" alt="" class="wp-image-16384" srcset="https://www.vag-coding.net/wp-content/uploads/2024/01/trailergateway.png 313w, https://www.vag-coding.net/wp-content/uploads/2024/01/trailergateway-300x282.png 300w" sizes="auto, (max-width: 313px) 100vw, 313px" /></figure>

<p class="wp-block-paragraph"><br/><strong>Line 2:</strong><br/><br/><strong>3</strong> &#8211; Click on<strong>&#8220;Select&#8221;</strong>, then click on<strong>&#8220;01 &#8211; Motor</strong>&#8220;.<br/><br/><strong>4</strong> &#8211; Click on &#8221; <strong>Coding &#8211; 07</strong>&#8221; then click on<strong>&#8220;Long Coding Helper</strong>&#8220;.<br/><br/><strong>5</strong> &#8211; Select byte &#8220;<strong>05</strong>&#8220;<br/>. Then check bit &#8220;<strong>4</strong>&#8220;: &#8220;<strong>Trailer installed</strong>&#8220;</p>

<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="483" height="226" src="https://www.vag-coding.fr/wp-content/uploads/2024/01/trailermoteur.png" alt="" class="wp-image-16385" srcset="https://www.vag-coding.net/wp-content/uploads/2024/01/trailermoteur.png 483w, https://www.vag-coding.net/wp-content/uploads/2024/01/trailermoteur-300x140.png 300w" sizes="auto, (max-width: 483px) 100vw, 483px" /></figure>

<p class="wp-block-paragraph"></p>

<p class="wp-block-paragraph"><strong>Line 3:</strong><br/><br/><strong>3</strong> &#8211; Click &#8220;<strong>Select</strong>,&#8221; then click &#8220;<strong><strong>&#8220;09 &#8211; Cent. Elect.&#8221;</strong></strong>&#8220;.<br/><br/><strong>4</strong> &#8211; Unlock <strong>SFD</strong> protection<br/><br/><strong>5</strong> &#8211; Click on<strong>“Adaptation &#8211; 10</strong>”.<br/><br/><strong>6</strong> &#8211; At the very top of this page, there is a drop-down menu.<br/>From this drop-down menu, select &#8220;<strong>Vernetzung &#8211; Anhaengeranschlussgeraet</strong>&#8220;<br/><br/><strong>7</strong> &#8211; On this same page, there is a second drop-down menu toward the bottom<br/>.<br/>From this menu, select &#8220;<strong>installed</strong>&#8221; and then confirm.</p>

<p class="wp-block-paragraph"></p>

<p class="wp-block-paragraph"><strong>Line 4:</strong><br/><br/><strong>3</strong> &#8211; Click on<strong>&#8220;Select</strong>&#8221; then click on<strong>&#8220;03 &#8211; ABS brake</strong>&#8220;.<br/><br/><strong>4</strong> &#8211; Unlock <strong>SFD</strong> protection<br/><br/><strong>5</strong> &#8211; Click on<strong>“Adaptation &#8211; 10</strong>”.<br/><br/><strong>6</strong> &#8211; At the very top of this page, there is a drop-down menu.<br/>From this drop-down menu, select &#8220;<strong>Gespannstabilisierung</strong>.&#8221;<br/><br/><strong>7</strong> &#8211; On this same page, there is a second drop-down menu located toward the bottom<br/>.<br/>From this menu, select &#8220;<strong>Active</strong>&#8221; and then confirm.</p>

<p class="wp-block-paragraph"><br/><br/><strong>Line 5:</strong><br/><br/><strong>3</strong> &#8211; Click on<strong>&#8220;Select</strong>&#8221; then click on &#8220;.<strong>13 &#8211; Auto Dist. Reg. </strong>&#8220;.<br/><br/><strong>4</strong> &#8211; Unlock <strong>SFD</strong> protection<br/><br/><strong>5</strong> &#8211; Click &#8221; <strong>Encoding &#8211; 07</strong>,&#8221; then click &#8220;<strong>Long Coding Helper</strong>&#8220;<br/><br/><strong>6</strong> &#8211; Select byte &#8220;<strong>01</strong>&#8220;<br/>Then check Bit<strong> 7</strong> &#8220;Control_module_for_towing_sensor&#8221;</p>

<p class="wp-block-paragraph"><br/><br/><strong>Line 6:</strong></p>

<p class="wp-block-paragraph"><br/><strong>3</strong> &#8211; Click &#8220;<strong>Select</strong>,&#8221; then click &#8220;<strong>3C &#8211; Lane Change</strong>.&#8221;<br/><br/><strong>4</strong> &#8211; Click on &#8221; <strong>Coding &#8211; 07</strong>&#8221; then click on<strong>&#8220;Long Coding Helper</strong>&#8220;.<br/><br/><strong>5</strong> &#8211; Select the &#8220;<strong>00</strong>&#8221; byte <br/>Then check Bit <strong>5</strong> &#8220;ECU for drawbar, with ECU for drawbar&#8221;<br/><br/><br/><br/><strong>Line 7:</strong><br/><br/><strong>3</strong> &#8211; Click &#8220;<strong>Select</strong>,&#8221; then click &#8220;<strong>6C &#8211; Rearview Camera</strong>.&#8221;<br/><br/><strong>4</strong> &#8211; Click on &#8221; <strong>Coding &#8211; 07</strong>&#8221; then click on<strong>&#8220;Long Coding Helper</strong>&#8220;.<br/><br/><strong>5</strong> &#8211; Select byte &#8220;<strong>02</strong>&#8220;<br/>Then set bit <strong>0</strong> (&#8220;equipment_ahk, installed&#8221;)<br/><br/><br/><br/><strong>Line 8:</strong><br/><br/><strong>3</strong> &#8211; Click on<strong>&#8220;Select</strong>&#8221; then click on &#8220;.<strong>A5 &#8211; Front, Sensors, Driver Assistance   </strong>&#8220;.<br/><br/><strong>4</strong> &#8211; Unlock <strong>SFD</strong> protection</p>

<p class="wp-block-paragraph"><strong>5</strong> &#8211; Click &#8221; <strong>Encoding &#8211; 07</strong>,&#8221; then click &#8220;<strong>Long Coding Helper</strong>&#8220;</p>

<p class="wp-block-paragraph">Select byte &#8220;<strong>05</strong>&#8220;</p>

<p class="wp-block-paragraph">Then set bit <strong>4</strong> (&#8220;AAG, 0 = not_coded / 1 = coded&#8221;)</p>

<p class="wp-block-paragraph"></p>

<p class="wp-block-paragraph"><strong>Line 9:</strong><br/><br/><strong>3</strong> &#8211; Click &#8220;<strong>Select</strong>,&#8221; then click &#8220;<strong><strong>69 &#8211; Trailer</strong></strong>&#8220;.<br/><br/><strong>4</strong> &#8211; Click on &#8221; <strong>Coding &#8211; 07</strong>&#8221; then click on<strong>&#8220;Long Coding Helper</strong>&#8220;.<br/><br/><strong>5</strong> &#8211; Select byte &#8220;<strong>01</strong>&#8220;<br/>Then check bits <strong>0-7</strong> &#8220;01 &#8211; Trailer Connector Diagnostics active&#8221;</p>

<p class="wp-block-paragraph">Select byte &#8220;<strong>03</strong>&#8220;<br/>Then check bits<strong> 0-7</strong> &#8220;01 &#8211; Trailer Connector Diagnostics active&#8221;</p>

<p class="wp-block-paragraph"></p>

<p class="wp-block-paragraph"><br/></p>
<button class="simplefavorite-button has-count preset" data-postid="51838" data-siteid="1" data-groupid="1" data-favoritecount="0" style="background-color:#4c9fe8;color:#000000;"><i class="sf-icon-love" style=""></i>Love<span class="simplefavorite-button-count" style="">0</span></button><p>L’article <a href="https://www.vag-coding.net/seat-cupra/leon-4-kl/leon-4-kl-enable-the-trailer-hitch-retrofit/">Leon 4 (KL) &#8211; Enable the trailer hitch (retrofit)</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></content:encoded>
					
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">51838</post-id>	</item>
		<item>
		<title>Leon 4 (KL) &#8211; Activate Rearview Camera (Retrofit)</title>
		<link>https://www.vag-coding.net/seat-cupra/leon-4-kl/leon-4-kl-activate-rearview-camera-retrofit/</link>
		
		<dc:creator><![CDATA[T0MS]]></dc:creator>
		<pubDate>Sat, 08 Aug 2026 00:30:03 +0000</pubDate>
				<category><![CDATA[Leon 4 (KL)]]></category>
		<category><![CDATA[Camera]]></category>
		<category><![CDATA[MIB Seat]]></category>
		<category><![CDATA[Retrofit]]></category>
		<guid isPermaLink="false">https://www.vag-coding.fr/seat-cupra/leon-4-kl/leon-4-kl-activate-rearview-camera-retrofit/</guid>

					<description><![CDATA[<p>Purpose: Enables the rearview camera after it has been installed on the MIB (retrofit). SFD: Yes Procedure: 1 &#8211; Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle&#8217;s diagnostics socket. 2 &#8211; Switch on the ignition and run the VCDS program or the&#46;&#46;&#46;</p>
<p>L’article <a href="https://www.vag-coding.net/seat-cupra/leon-4-kl/leon-4-kl-activate-rearview-camera-retrofit/">Leon 4 (KL) &#8211; Activate Rearview Camera (Retrofit)</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></description>
										<content:encoded><![CDATA[
<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="600" height="400" src="https://www.vag-coding.fr/wp-content/uploads/2023/03/seat_leon_kl.png" alt="VAG Coding VCDS ODBeleven Seat Leon 4 KL" class="wp-image-8541" srcset="https://www.vag-coding.net/wp-content/uploads/2023/03/seat_leon_kl.png 600w, https://www.vag-coding.net/wp-content/uploads/2023/03/seat_leon_kl-300x200.png 300w" sizes="auto, (max-width: 600px) 100vw, 600px" /></figure>

<p class="wp-block-paragraph"><strong>Purpose:</strong> Enables the rearview camera after it has been installed on the MIB (retrofit). <br/><br/><br/>SFD: Yes<br/><br/><strong>Procedure:</strong> <br/><strong>1</strong> &#8211; Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle&#8217;s diagnostics socket.<br/><br/><strong></strong> 2 &#8211; Switch on the ignition and run the VCDS program or the OBDeleven app.  </p>

<p class="wp-block-paragraph"><strong>Hardware upgrade :</strong></p>

<p class="wp-block-paragraph">VW Retrofit Kit: 5H9 054 634</p>

<p class="wp-block-paragraph"></p>

<p class="wp-block-paragraph"><strong>Line 1:</strong><br/><br/><strong>3</strong> &#8211; Click &#8220;<strong>Select</strong>,&#8221; then click &#8220;<strong>19 &#8211; CAN Gateway</strong>.&#8221;<br/><br/><strong></strong> 4 &#8211; Click &#8220;<strong>Coding &#8211; 07</strong>,&#8221; then click &#8220;<strong>Long Coding Helper</strong>&#8220;<br/><br/><strong>5</strong> &#8211; Select the bit: PaCo_Video_Parksystem &#8211; RVC_compact_smart</p>

<p class="wp-block-paragraph"></p>

<p class="wp-block-paragraph"><strong>Line 2:</strong><br/><br/><strong>3</strong> &#8211; Click on<strong>“Select”</strong> then click on<strong>“5F &#8211; Electr. information</strong>”.<br/><br/><strong>4</strong> &#8211; Unlock <strong>SFD</strong> protection<br/><br/><strong>5</strong> &#8211; Click on<strong>“Adaptation &#8211; 10</strong>”.<br/><br/><strong>6</strong> &#8211; At the very top of this page, there is a drop-down menu.<br/>From this drop-down menu, select &#8220;<strong><strong>Car Function List BAP &#8211; VPS_0x0B</strong></strong>&#8220;<br/><br/><strong>7</strong> &#8211; On this same page, there is a second drop-down menu at the bottom<br/>of the page.<br/>On this menu, choose the<strong>“active</strong>” value.</p>

<p class="wp-block-paragraph"><strong>Line 3:</strong><br/><br/><strong>3</strong> &#8211; Click on<strong>“Select”</strong> then click on<strong>“5F &#8211; Electr. information</strong>”.<br/><br/><strong>4</strong> &#8211; Unlock <strong>SFD</strong> protection<br/><br/><strong>5</strong> &#8211; Click on<strong>“Adaptation &#8211; 10</strong>”.<br/><br/><strong>6</strong> &#8211; At the very top of this page, there is a drop-down menu.<br/>From this drop-down menu, select &#8220;<strong><strong><strong>Car Function List BAP &#8211; VPS_0x0B_msg_bus</strong></strong></strong>&#8220;<br/><br/><strong>7</strong> &#8211; On this same page, there is a second drop-down menu further down<br/>.<br/>From this menu, select the value &#8220;<strong><strong>can_fas</strong></strong>&#8220;</p>

<p class="wp-block-paragraph"><strong>Line 4:</strong><br/><br/><strong>3</strong> &#8211; Click on<strong>“Select”</strong> then click on<strong>“5F &#8211; Electr. information</strong>”.<br/><br/><strong>4</strong> &#8211; Unlock <strong>SFD</strong> protection<br/><br/><strong>5</strong> &#8211; Click on<strong>“Adaptation &#8211; 10</strong>”.<br/><br/><strong>6</strong> &#8211; At the very top of this page, there is a drop-down menu.<br/>From this drop-down menu, select &#8220;<strong><strong><strong>function_configuration_unit</strong></strong>&#8211; RVC_video_input</strong>&#8220;<br/><br/><strong>7</strong> &#8211; On this same page, there is a second drop-down menu further down<br/>.<br/>From this menu, select the value &#8220;<strong><strong>ethernet</strong></strong>&#8220;</p>

<p class="wp-block-paragraph"><strong>Line 5:</strong><br/><br/><strong>3</strong> &#8211; Click on<strong>“Select”</strong> then click on<strong>“5F &#8211; Electr. information</strong>”.<br/><br/><strong>4</strong> &#8211; Unlock <strong>SFD</strong> protection<br/><br/><strong>5</strong> &#8211; Click on<strong>“Adaptation &#8211; 10</strong>”.<br/><br/><strong>6</strong> &#8211; At the very top of this page, there is a drop-down menu.<br/>From this drop-down menu, select &#8220;<strong><strong><strong>parkingsystem_video_input</strong></strong>&#8211; carrier_resolution</strong>&#8220;<br/><br/><strong>7</strong> &#8211; On this same page, there is a second drop-down menu further down<br/>.<br/>From this menu, select the value &#8220;<strong><strong>1392&#215;656</strong></strong>&#8220;</p>

<p class="wp-block-paragraph"><strong>Line 6:</strong><br/><br/><strong>3</strong> &#8211; Click on<strong>“Select”</strong> then click on<strong>“5F &#8211; Electr. information</strong>”.<br/><br/><strong>4</strong> &#8211; Click on<strong>“Security Access &#8211; 16</strong>” then enter the code<strong>“20103</strong>”.<br/><br/><strong>5</strong> &#8211; Click on<strong>“Adaptation &#8211; 10</strong>”.<br/><br/><strong>6</strong> &#8211; At the very top of this page, there is a drop-down menu.<br/>From this drop-down menu, select &#8220;<strong>function_configuration_rvc &#8211; rvc_low_black_screen_trunk_open</strong>&#8220;<br/><br/><strong>7</strong> &#8211; On this same page, there is a second drop-down menu, but further down<br/>.<br/>From this menu, select the value &#8220;<strong><strong>not_active</strong></strong>&#8220;</p>

<p class="wp-block-paragraph"><strong>Line 7:</strong><br/><br/><strong>3</strong> &#8211; Click on<strong>“Select”</strong> then click on<strong>“5F &#8211; Electr. information</strong>”.<br/><br/><strong>4</strong> &#8211; Unlock <strong>SFD</strong> protection<br/><br/><strong>5</strong> &#8211; Click on<strong>“Adaptation &#8211; 10</strong>”.<br/><br/><strong>6</strong> &#8211; At the very top of this page, there is a drop-down menu.<br/>From this drop-down menu, select &#8220;<strong><strong><strong><strong>function_configuration_rvc</strong></strong></strong>&#8211; rvc_low_failsafe</strong>&#8220;<br/><br/><strong>7</strong> &#8211; On this same page, there is a second drop-down menu, but further down<br/>.<br/>From this menu, select the value &#8220;<strong><strong>not_active</strong></strong>&#8220;</p>

<p class="wp-block-paragraph"><strong>Line 8:</strong><br/><br/><strong>3</strong> &#8211; Click on<strong>“Select”</strong> then click on<strong>“5F &#8211; Electr. information</strong>”.<br/><br/><strong>4</strong> &#8211; Unlock <strong>SFD</strong> protection<br/><br/><strong>5</strong> &#8211; Click on<strong>“Adaptation &#8211; 10</strong>”.<br/><br/><strong>6</strong> &#8211; At the very top of this page, there is a drop-down menu.<br/>From this drop-down menu, select &#8220;<strong><strong><strong><strong>function_configuration_rvc</strong></strong></strong>&#8211; rvc_low_black_screen_velocity_threshold</strong>&#8220;<br/><br/><strong>7</strong> &#8211; On this same page, there is a second drop-down menu, but further down<br/>.<br/>From this menu, select the value &#8220;<strong><strong>not_active</strong></strong>&#8220;</p>

<p class="wp-block-paragraph"><strong>Line 9:</strong><br/><br/><strong>3</strong> &#8211; Click on<strong>“Select”</strong> then click on<strong>“5F &#8211; Electr. information</strong>”.<br/><br/><strong>4</strong> &#8211; Click on<strong>“Security Access &#8211; 16</strong>” then enter the code<strong>“20103</strong>”.<br/><br/><strong>5</strong> &#8211; Click on<strong>“Adaptation &#8211; 10</strong>”.<br/><br/><strong>6</strong> &#8211; At the very top of this page, there is a drop-down menu.<br/>From this drop-down menu, select &#8220;<strong><strong><strong><strong>function_configuration_rvc</strong></strong></strong>&#8211; rear_view_low_rvc</strong>&#8220;<br/><br/><strong>7</strong> &#8211; On this same page, there is a second drop-down menu, but further down<br/>.<br/>From this menu, select the value &#8220;<strong><strong>not_active</strong></strong>&#8220;</p>

<p class="wp-block-paragraph"><strong>Line 10:</strong><br/><br/><strong>3</strong> &#8211; Click on<strong>“Select”</strong> then click on<strong>“5F &#8211; Electr. information</strong>”.<br/><br/><strong>4</strong> &#8211; Unlock <strong>SFD</strong> protection<br/><br/><strong>5</strong> &#8211; Click on<strong>“Adaptation &#8211; 10</strong>”.<br/><br/><strong>6</strong> &#8211; At the very top of this page, there is a drop-down menu.<br/>From this drop-down menu, select &#8220;<strong><strong><strong><strong>function_configuration_rvc</strong></strong></strong>&#8211; rvc_low_lid_close_delay_time</strong>&#8220;<br/><br/><strong>7</strong> &#8211; On this same page, there is a second drop-down menu located toward the bottom<br/>.<br/>From this menu, select the value &#8220;<strong><strong>0 [ONE]_s</strong></strong>&#8220;</p>

<p class="wp-block-paragraph"><strong>Line 11:</strong><br/><br/><strong>3</strong> &#8211; Click on<strong>“Select”</strong> then click on<strong>“5F &#8211; Electr. information</strong>”.<br/><br/><strong>4</strong> &#8211; Unlock <strong>SFD</strong> protection<br/><br/><strong>5</strong> &#8211; Click on<strong>“Adaptation &#8211; 10</strong>”.<br/><br/><strong>6</strong> &#8211; At the very top of this page, there is a drop-down menu.<br/>From this drop-down menu, select &#8220;<strong><strong><strong><strong>function_configuration_rvc</strong></strong></strong>&#8211; rvc_low_videofailure_detection_time</strong>&#8220;<br/><br/><strong>7</strong> &#8211; On this same page, there is a second drop-down menu, but further down<br/>.<br/>From this menu, select the value &#8220;<strong><strong>0</strong></strong>&#8220;</p>
<button class="simplefavorite-button has-count preset" data-postid="51844" data-siteid="1" data-groupid="1" data-favoritecount="0" style="background-color:#4c9fe8;color:#000000;"><i class="sf-icon-love" style=""></i>Love<span class="simplefavorite-button-count" style="">0</span></button><p>L’article <a href="https://www.vag-coding.net/seat-cupra/leon-4-kl/leon-4-kl-activate-rearview-camera-retrofit/">Leon 4 (KL) &#8211; Activate Rearview Camera (Retrofit)</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></content:encoded>
					
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">51844</post-id>	</item>
		<item>
		<title>A3 (8Y) &#8211; Enable the trailer hitch (retrofit)</title>
		<link>https://www.vag-coding.net/audi/a3-8y/a3-8y-enable-the-trailer-hitch-retrofit/</link>
		
		<dc:creator><![CDATA[T0MS]]></dc:creator>
		<pubDate>Sat, 08 Aug 2026 00:25:51 +0000</pubDate>
				<category><![CDATA[A3 (8Y)]]></category>
		<category><![CDATA[Retrofit]]></category>
		<guid isPermaLink="false">https://www.vag-coding.fr/audi/a3-8y/a3-8y-enable-the-trailer-hitch-retrofit/</guid>

					<description><![CDATA[<p>Purpose: Enables the installation of a retrofit trailer hitch (trailer/towbar retrofit). Warning!! Depending on the modules you have installed, there are up to 9 coding lines to complete here; most control units require a long coding process with a &#8220;trailer&#8221; that must be enabled! SFD: yes Proceed : 1 &#8211; Engine off, ignition off, connect&#46;&#46;&#46;</p>
<p>L’article <a href="https://www.vag-coding.net/audi/a3-8y/a3-8y-enable-the-trailer-hitch-retrofit/">A3 (8Y) &#8211; Enable the trailer hitch (retrofit)</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></description>
										<content:encoded><![CDATA[
<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="1200" height="628" src="https://www.vag-coding.fr/wp-content/uploads/2023/03/AUDI-A3-8Y.png" alt="VAG Coding VCDS ODBeleven Audi A3 8Y" class="wp-image-8560" srcset="https://www.vag-coding.net/wp-content/uploads/2023/03/AUDI-A3-8Y.png 1200w, https://www.vag-coding.net/wp-content/uploads/2023/03/AUDI-A3-8Y-300x157.png 300w, https://www.vag-coding.net/wp-content/uploads/2023/03/AUDI-A3-8Y-1024x536.png 1024w, https://www.vag-coding.net/wp-content/uploads/2023/03/AUDI-A3-8Y-768x402.png 768w, https://www.vag-coding.net/wp-content/uploads/2023/03/AUDI-A3-8Y-600x314.png 600w" sizes="auto, (max-width: 1200px) 100vw, 1200px" /></figure>

<p class="wp-block-paragraph"><strong>Purpose:</strong> Enables the installation of a retrofit trailer hitch (trailer/towbar retrofit).  </p>

<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="591" height="327" src="https://www.vag-coding.fr/wp-content/uploads/2024/01/Capture-decran-2024-01-09-215831.png" alt="" class="wp-image-16391" srcset="https://www.vag-coding.net/wp-content/uploads/2024/01/Capture-decran-2024-01-09-215831.png 591w, https://www.vag-coding.net/wp-content/uploads/2024/01/Capture-decran-2024-01-09-215831-300x166.png 300w" sizes="auto, (max-width: 591px) 100vw, 591px" /></figure>

<p class="wp-block-paragraph"><strong>Warning!! Depending on the modules you have installed, there are up to 9 coding lines to complete here; most control units require a long coding process with a &#8220;trailer&#8221; that must be enabled!   </strong><br/><br/>SFD: yes<br/><br/><strong>Proceed :</strong> <br/><strong>1</strong> &#8211; Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle&#8217;s diagnostic socket or OBDeleven box.<br/><br/><strong>2</strong> &#8211; Switch on the ignition and run the VCDS program.  </p>

<p class="wp-block-paragraph"><br/><br/><strong>Line 1:</strong><br/><br/><strong>3</strong> &#8211; Click &#8220;<strong>Select</strong>,&#8221; then click &#8220;<strong>19 &#8211; CAN Gateway</strong>.&#8221;<br/><br/><strong>4</strong> &#8211; Select <strong>&#8220;Installation List&#8221;</strong><br/><br/><strong>5</strong> &#8211; Check &#8220;<strong>69 &#8211; Trailer</strong>&#8221; in the list</p>

<p class="wp-block-paragraph"><strong>6</strong> &#8211; Save coding</p>

<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="313" height="294" src="https://www.vag-coding.fr/wp-content/uploads/2024/01/trailergateway.png" alt="" class="wp-image-16384" srcset="https://www.vag-coding.net/wp-content/uploads/2024/01/trailergateway.png 313w, https://www.vag-coding.net/wp-content/uploads/2024/01/trailergateway-300x282.png 300w" sizes="auto, (max-width: 313px) 100vw, 313px" /></figure>

<p class="wp-block-paragraph"><br/><strong>Line 2:</strong><br/><br/><strong>3</strong> &#8211; Click on<strong>&#8220;Select&#8221;</strong>, then click on<strong>&#8220;01 &#8211; Motor</strong>&#8220;.<br/><br/><strong>4</strong> &#8211; Click on &#8221; <strong>Coding &#8211; 07</strong>&#8221; then click on<strong>&#8220;Long Coding Helper</strong>&#8220;.<br/><br/><strong>5</strong> &#8211; Select byte &#8220;<strong>05</strong>&#8220;<br/>. Then check bit &#8220;<strong>4</strong>&#8220;: &#8220;<strong>Trailer installed</strong>&#8220;</p>

<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="483" height="226" src="https://www.vag-coding.fr/wp-content/uploads/2024/01/trailermoteur.png" alt="" class="wp-image-16385" srcset="https://www.vag-coding.net/wp-content/uploads/2024/01/trailermoteur.png 483w, https://www.vag-coding.net/wp-content/uploads/2024/01/trailermoteur-300x140.png 300w" sizes="auto, (max-width: 483px) 100vw, 483px" /></figure>

<p class="wp-block-paragraph"></p>

<p class="wp-block-paragraph"><strong>Line 3:</strong><br/><br/><strong>3</strong> &#8211; Click &#8220;<strong>Select</strong>,&#8221; then click &#8220;<strong><strong>&#8220;09 &#8211; Cent. Elect.&#8221;</strong></strong>&#8220;.<br/><br/><strong>4</strong> &#8211; Unlock <strong>SFD</strong> protection<br/><br/><strong>5</strong> &#8211; Click on<strong>“Adaptation &#8211; 10</strong>”.<br/><br/><strong>6</strong> &#8211; At the very top of this page, there is a drop-down menu.<br/>From this drop-down menu, select &#8220;<strong>Vernetzung &#8211; Anhaengeranschlussgeraet</strong>&#8220;<br/><br/><strong>7</strong> &#8211; On this same page, there is a second drop-down menu toward the bottom<br/>.<br/>From this menu, select &#8220;<strong>installed</strong>&#8221; and then confirm.</p>

<p class="wp-block-paragraph"></p>

<p class="wp-block-paragraph"><strong>Line 4:</strong><br/><br/><strong>3</strong> &#8211; Click on<strong>&#8220;Select</strong>&#8221; then click on<strong>&#8220;03 &#8211; ABS brake</strong>&#8220;.<br/><br/><strong>4</strong> &#8211; Unlock <strong>SFD</strong> protection<br/><br/><strong>5</strong> &#8211; Click on<strong>“Adaptation &#8211; 10</strong>”.<br/><br/><strong>6</strong> &#8211; At the very top of this page, there is a drop-down menu.<br/>From this drop-down menu, select &#8220;<strong>Gespannstabilisierung</strong>.&#8221;<br/><br/><strong>7</strong> &#8211; On this same page, there is a second drop-down menu located toward the bottom<br/>.<br/>From this menu, select &#8220;<strong>Active</strong>&#8221; and then confirm.</p>

<p class="wp-block-paragraph"><br/><br/><strong>Line 5:</strong><br/><br/><strong>3</strong> &#8211; Click on<strong>&#8220;Select</strong>&#8221; then click on &#8220;.<strong>13 &#8211; Auto Dist. Reg. </strong>&#8220;.<br/><br/><strong>4</strong> &#8211; Unlock <strong>SFD</strong> protection<br/><br/><strong>5</strong> &#8211; Click &#8221; <strong>Encoding &#8211; 07</strong>,&#8221; then click &#8220;<strong>Long Coding Helper</strong>&#8220;<br/><br/><strong>6</strong> &#8211; Select byte &#8220;<strong>01</strong>&#8220;<br/>Then check Bit<strong> 7</strong> &#8220;Control_module_for_towing_sensor&#8221;</p>

<p class="wp-block-paragraph"><br/><br/><strong>Line 6:</strong></p>

<p class="wp-block-paragraph"><br/><strong>3</strong> &#8211; Click &#8220;<strong>Select</strong>,&#8221; then click &#8220;<strong>3C &#8211; Lane Change</strong>.&#8221;<br/><br/><strong>4</strong> &#8211; Click on &#8221; <strong>Coding &#8211; 07</strong>&#8221; then click on<strong>&#8220;Long Coding Helper</strong>&#8220;.<br/><br/><strong>5</strong> &#8211; Select the &#8220;<strong>00</strong>&#8221; byte <br/>Then check Bit <strong>5</strong> &#8220;ECU for drawbar, with ECU for drawbar&#8221;<br/><br/><br/><br/><strong>Line 7:</strong><br/><br/><strong>3</strong> &#8211; Click &#8220;<strong>Select</strong>,&#8221; then click &#8220;<strong>6C &#8211; Rearview Camera</strong>.&#8221;<br/><br/><strong>4</strong> &#8211; Click on &#8221; <strong>Coding &#8211; 07</strong>&#8221; then click on<strong>&#8220;Long Coding Helper</strong>&#8220;.<br/><br/><strong>5</strong> &#8211; Select byte &#8220;<strong>02</strong>&#8220;<br/>Then set bit <strong>0</strong> (&#8220;equipment_ahk, installed&#8221;)<br/><br/><br/><br/><strong>Line 8:</strong><br/><br/><strong>3</strong> &#8211; Click on<strong>&#8220;Select</strong>&#8221; then click on &#8220;.<strong>A5 &#8211; Front, Sensors, Driver Assistance   </strong>&#8220;.<br/><br/><strong>4</strong> &#8211; Unlock <strong>SFD</strong> protection</p>

<p class="wp-block-paragraph"><strong>5</strong> &#8211; Click &#8221; <strong>Encoding &#8211; 07</strong>,&#8221; then click &#8220;<strong>Long Coding Helper</strong>&#8220;</p>

<p class="wp-block-paragraph">Select byte &#8220;<strong>05</strong>&#8220;</p>

<p class="wp-block-paragraph">Then set bit <strong>4</strong> (&#8220;AAG, 0 = not_coded / 1 = coded&#8221;)</p>

<p class="wp-block-paragraph"></p>

<p class="wp-block-paragraph"><strong>Line 9:</strong><br/><br/><strong>3</strong> &#8211; Click &#8220;<strong>Select</strong>,&#8221; then click &#8220;<strong><strong>69 &#8211; Trailer</strong></strong>&#8220;.<br/><br/><strong>4</strong> &#8211; Click on &#8221; <strong>Coding &#8211; 07</strong>&#8221; then click on<strong>&#8220;Long Coding Helper</strong>&#8220;.<br/><br/><strong>5</strong> &#8211; Select byte &#8220;<strong>01</strong>&#8220;<br/>Then check bits <strong>0-7</strong> &#8220;01 &#8211; Trailer Connector Diagnostics active&#8221;</p>

<p class="wp-block-paragraph">Select byte &#8220;<strong>03</strong>&#8220;<br/>Then check bits<strong> 0-7</strong> &#8220;01 &#8211; Trailer Connector Diagnostics active&#8221;</p>

<p class="wp-block-paragraph"></p>

<p class="wp-block-paragraph"><br/></p>
<button class="simplefavorite-button has-count preset" data-postid="51862" data-siteid="1" data-groupid="1" data-favoritecount="0" style="background-color:#4c9fe8;color:#000000;"><i class="sf-icon-love" style=""></i>Love<span class="simplefavorite-button-count" style="">0</span></button><p>L’article <a href="https://www.vag-coding.net/audi/a3-8y/a3-8y-enable-the-trailer-hitch-retrofit/">A3 (8Y) &#8211; Enable the trailer hitch (retrofit)</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></content:encoded>
					
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">51862</post-id>	</item>
	</channel>
</rss>
