<?xml version="1.0" encoding="UTF-8"?><rss version="2.0"
	xmlns:content="http://purl.org/rss/1.0/modules/content/"
	xmlns:wfw="http://wellformedweb.org/CommentAPI/"
	xmlns:dc="http://purl.org/dc/elements/1.1/"
	xmlns:atom="http://www.w3.org/2005/Atom"
	xmlns:sy="http://purl.org/rss/1.0/modules/syndication/"
	xmlns:slash="http://purl.org/rss/1.0/modules/slash/"
	>

<channel>
	<title>Liste des codages pour la Camera de recul - VAG Coding</title>
	<atom:link href="https://www.vag-coding.net/tag/camera/feed/" rel="self" type="application/rss+xml" />
	<link>https://www.vag-coding.net/tag/camera/</link>
	<description>Codage Personnalisation et Activation d&#039;Options Cachées VCDS VAG-COM OBDeleven VCP Tuto Codes Défauts Sécurisé CarPlay VW AUDI SEAT SKODA</description>
	<lastBuildDate>Mon, 02 Nov 2026 08:56:56 +0000</lastBuildDate>
	<language>en-US</language>
	<sy:updatePeriod>
	hourly	</sy:updatePeriod>
	<sy:updateFrequency>
	1	</sy:updateFrequency>
	

<image>
	<url>https://www.vag-coding.net/wp-content/uploads/2022/12/cropped-cropped-990A929D-545E-4694-833C-F67C340B13FC-e1672418802812-150x150.jpeg</url>
	<title>Liste des codages pour la Camera de recul - VAG Coding</title>
	<link>https://www.vag-coding.net/tag/camera/</link>
	<width>32</width>
	<height>32</height>
</image> 
<site xmlns="com-wordpress:feed-additions:1">211573443</site>	<item>
		<title>Q5 (FY) &#8211; Enable Rearview Camera (Retrofit)</title>
		<link>https://www.vag-coding.net/audi/q5-fy/q5-fy-enable-rearview-camera-retrofit/</link>
		
		<dc:creator><![CDATA[T0MS]]></dc:creator>
		<pubDate>Mon, 02 Nov 2026 07:22:59 +0000</pubDate>
				<category><![CDATA[Q5 (FY)]]></category>
		<category><![CDATA[Camera]]></category>
		<category><![CDATA[MMI Audi]]></category>
		<category><![CDATA[Retrofit]]></category>
		<guid isPermaLink="false">https://www.vag-coding.fr/audi/q5-fy/q5-fy-enable-rearview-camera-retrofit/</guid>

					<description><![CDATA[<p>Purpose: Enables the rearview camera after it has been installed on the MMI (retrofit). Procedure: 1 &#8211; With the engine off and the ignition off, connect your official VAG-COM VCDS cable to the computer, then connect the other end to your vehicle’s diagnostic port. 2 &#8211; Turn on the ignition, then launch the VCDS program.&#46;&#46;&#46;</p>
<p>L’article <a href="https://www.vag-coding.net/audi/q5-fy/q5-fy-enable-rearview-camera-retrofit/">Q5 (FY) &#8211; Enable Rearview Camera (Retrofit)</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></description>
										<content:encoded><![CDATA[
<figure class="wp-block-image size-full"><img fetchpriority="high" decoding="async" width="1200" height="628" src="https://www.vag-coding.fr/wp-content/uploads/2023/02/AUDI-Q5-FY.png" alt="VAG Coding VCDS ODBeleven Audi Q5 FY" class="wp-image-7313" srcset="https://www.vag-coding.net/wp-content/uploads/2023/02/AUDI-Q5-FY.png 1200w, https://www.vag-coding.net/wp-content/uploads/2023/02/AUDI-Q5-FY-300x157.png 300w, https://www.vag-coding.net/wp-content/uploads/2023/02/AUDI-Q5-FY-1024x536.png 1024w, https://www.vag-coding.net/wp-content/uploads/2023/02/AUDI-Q5-FY-768x402.png 768w, https://www.vag-coding.net/wp-content/uploads/2023/02/AUDI-Q5-FY-600x314.png 600w" sizes="(max-width: 1200px) 100vw, 1200px" /></figure>

<p class="wp-block-paragraph"><strong>Purpose:</strong> Enables the rearview camera after it has been installed on the MMI (retrofit). <br/><br/><br/><strong>Procedure:</strong> <br/><strong>1</strong> &#8211; With the engine off and the ignition off, connect your official VAG-COM VCDS cable to the computer, then connect the other end to your vehicle’s diagnostic port.<br/><br/><strong>2</strong> &#8211; Turn on the ignition, then launch the VCDS program.</p>

<p class="wp-block-paragraph"><strong>Wiring : </strong></p>

<ul class="wp-block-list">
<li><strong>2 CAN signal wires</strong> (for communication) &#8211; <strong>Orange-Purple</strong> (CAN High) and <strong>Orange-Brown</strong> (CAN Low)</li>



<li><strong>2 video signal wires</strong> &#8211; <strong>Black</strong> and <strong>transparent</strong></li>



<li><strong>2 power wires</strong> &#8211; <strong>White</strong> (less than 12 V) and <strong>brown</strong> (GND)</li>
</ul>

<p class="wp-block-paragraph"><strong>Line 1:</strong><br/><br/> 3 &#8211; Click on<strong>&#8220;Select&#8221;</strong>, then click on<strong>&#8220;19 &#8211; CAN Gateway</strong>&#8220;.<br/><br/> 4 &#8211; Select <strong>&#8220;Installation List&#8221;</strong><br/><br/> 5 &#8211; Tick:<strong>&#8220;6C &#8211; Rear View Camera</strong>&#8221; in the list</p>

<p class="wp-block-paragraph"><strong>6</strong> &#8211; Save coding</p>

<p class="wp-block-paragraph"><strong>Line 2:</strong><br/><br/><strong>3</strong> &#8211; Click &#8220;<strong>Select</strong>,&#8221; then click &#8220;<strong>6C &#8211; Rear View Camera</strong>.&#8221;<br/><br/><strong>5</strong> &#8211; Click on<strong>&#8220;Coding &#8211; 07</strong>&#8221; then click on<strong>&#8220;Long Coding Helper</strong>&#8220;.<br/><br/><strong>6</strong> &#8211; Select byte <strong>07</strong><br/>Then check bit <strong>0, 1, 2 and 4</strong></p>

<p class="wp-block-paragraph">Example:<br/>Byte 04 &#8211; bit 0 locked at 1 and AHK<br/>Byte 04 &#8211; Bit 1 on 1 &#8211; Front and rear parking aid installed<br/>Byte 04 &#8211; Bit 1 on 0 &#8211; Rear parking aid installed<br/>Byte 04 &#8211; bits 2 on 1 &#8211; Parking unit installed<br/>Byte 07 &#8211; bits 0 on 1 &#8211; Guides through<br/>Byte 07 &#8211; bits 1 on 1 &#8211; Parallel guides<br/>Byte 07 &#8211; Bit 2 on 1 &#8211; Trailer Guides<br/>Byte 07 &#8211; Bit 3 on 1 &#8211; Guide cross<br/>Byte 07 &#8211; Add 4 on 1 &#8211; Park direction aid Guide installed</p>

<p class="wp-block-paragraph"><strong>Line 3</strong> <strong>:</strong><br/><br/><strong>3</strong> &#8211; Click &#8220;<strong>Select</strong>,&#8221; then click &#8220;<strong><strong>&#8220;09 &#8211; Cent. Elect.&#8221;</strong></strong>&#8220;.<br/><br/><strong>4</strong> &#8211; Click on<strong>&#8220;Coding &#8211; 07</strong>&#8221; then click on<strong>&#8220;Long Coding Helper</strong>&#8220;.<br/><br/><strong>5</strong> &#8211; Select byte <strong>35</strong><br/>Then check bit <strong>4</strong></p>

<p class="wp-block-paragraph">If you have an SOS button, the code is different. Byte 35 is missing, so go to <strong>byte 38,</strong> at <strong>Bit 2-3</strong>, select “<strong><strong>04 camera variant_rvc, installed</strong></strong>”. See image below.</p>

<p class="wp-block-paragraph">For the Q5 Facelift with MIB3, select <strong>&#8220;Rvcc&#8221;</strong></p>

<figure class="wp-block-image size-large"><img decoding="async" width="1024" height="576" src="https://www.vag-coding.fr/wp-content/uploads/2025/03/cameraa4-1024x576.jpeg" alt="" class="wp-image-31651" srcset="https://www.vag-coding.net/wp-content/uploads/2025/03/cameraa4-1024x576.jpeg 1024w, https://www.vag-coding.net/wp-content/uploads/2025/03/cameraa4-300x169.jpeg 300w, https://www.vag-coding.net/wp-content/uploads/2025/03/cameraa4-768x432.jpeg 768w, https://www.vag-coding.net/wp-content/uploads/2025/03/cameraa4-1536x864.jpeg 1536w, https://www.vag-coding.net/wp-content/uploads/2025/03/cameraa4-520x293.jpeg 520w, https://www.vag-coding.net/wp-content/uploads/2025/03/cameraa4-600x338.jpeg 600w, https://www.vag-coding.net/wp-content/uploads/2025/03/cameraa4.jpeg 1920w" sizes="(max-width: 1024px) 100vw, 1024px" /></figure>

<figure class="wp-block-image size-large"><img decoding="async" width="576" height="1024" src="https://www.vag-coding.fr/wp-content/uploads/2025/03/obdelevencamera-576x1024.jpg" alt="" class="wp-image-31658" srcset="https://www.vag-coding.net/wp-content/uploads/2025/03/obdelevencamera-576x1024.jpg 576w, https://www.vag-coding.net/wp-content/uploads/2025/03/obdelevencamera-169x300.jpg 169w, https://www.vag-coding.net/wp-content/uploads/2025/03/obdelevencamera-768x1365.jpg 768w, https://www.vag-coding.net/wp-content/uploads/2025/03/obdelevencamera-600x1066.jpg 600w, https://www.vag-coding.net/wp-content/uploads/2025/03/obdelevencamera.jpg 844w" sizes="(max-width: 576px) 100vw, 576px" /></figure>

<p class="wp-block-paragraph"><strong>Line 4:</strong><br/><br/><strong>3</strong> &#8211; Click &#8220;<strong>Select</strong>,&#8221; then click &#8220;<strong>5F – Electrical Information.</strong>&#8220;<br/><br/><strong>4</strong> &#8211; Click &#8220;<strong>Security Access &#8211; 16</strong>,&#8221; then enter the code &#8220;<strong>20103</strong>&#8220;<br/><br/><strong>5</strong> &#8211; Click on &#8220;<strong>Adaptation &#8211; 10</strong>&#8220;<br/><br/><strong>6</strong> &#8211; At the very top of this page, there is a drop-down menu.<br/>From this drop-down menu, select &#8220;<strong><strong>Car Function List BAP Gen2 &#8211; VPS_0x0B</strong></strong>&#8220;<br/><br/><strong>7</strong> &#8211; On this same page, there is a second drop-down menu, but further down<br/>the page.<br/>From this menu, select the value &#8220;<strong>active</strong>&#8220;</p>

<p class="wp-block-paragraph"><strong>Line 5:</strong><br/><br/><strong>3</strong> &#8211; Click &#8220;<strong>Select</strong>,&#8221; then click &#8220;<strong>5F – Electrical Information.</strong>&#8220;<br/><br/><strong>4</strong> &#8211; Click &#8220;<strong>Security Access &#8211; 16</strong>,&#8221; then enter the code &#8220;<strong>20103</strong>&#8220;<br/><br/><strong>5</strong> &#8211; Click on<strong>“Adaptation &#8211; 10</strong>”.<br/><br/><strong>6</strong> &#8211; On this page, at the very top, there is a drop-down menu.<br/>In this drop-down menu, choose &#8220;<strong><strong><strong>Car Function List BAP Gen2 &#8211; VPS_0x0B_msg_bus</strong></strong></strong>&#8220;<br/><br/><strong>7</strong> &#8211; On this same page, there is a second drop-down menu at the bottom<br/>of the page.<br/>On this menu, choose the value &#8220;<strong><strong>Terminal 15</strong></strong>&#8220;</p>

<p class="wp-block-paragraph">For A4 B9.5 Facelift with MIB3, search:<strong>“Vehicle function list BAP</strong>”.</p>

<figure class="wp-block-gallery has-nested-images columns-default is-cropped wp-block-gallery-1 is-layout-flex wp-block-gallery-is-layout-flex">
<figure class="wp-block-image size-large"><img loading="lazy" decoding="async" width="576" height="1024" data-id="31660" src="https://www.vag-coding.fr/wp-content/uploads/2025/03/vpscamera-576x1024.jpg" alt="" class="wp-image-31660" srcset="https://www.vag-coding.net/wp-content/uploads/2025/03/vpscamera-576x1024.jpg 576w, https://www.vag-coding.net/wp-content/uploads/2025/03/vpscamera-169x300.jpg 169w, https://www.vag-coding.net/wp-content/uploads/2025/03/vpscamera-768x1365.jpg 768w, https://www.vag-coding.net/wp-content/uploads/2025/03/vpscamera-600x1066.jpg 600w, https://www.vag-coding.net/wp-content/uploads/2025/03/vpscamera.jpg 844w" sizes="auto, (max-width: 576px) 100vw, 576px" /></figure>



<figure class="wp-block-image size-large"><img loading="lazy" decoding="async" width="576" height="1024" data-id="31661" src="https://www.vag-coding.fr/wp-content/uploads/2025/03/vpscamera2-576x1024.jpg" alt="" class="wp-image-31661" srcset="https://www.vag-coding.net/wp-content/uploads/2025/03/vpscamera2-576x1024.jpg 576w, https://www.vag-coding.net/wp-content/uploads/2025/03/vpscamera2-169x300.jpg 169w, https://www.vag-coding.net/wp-content/uploads/2025/03/vpscamera2-768x1365.jpg 768w, https://www.vag-coding.net/wp-content/uploads/2025/03/vpscamera2-600x1066.jpg 600w, https://www.vag-coding.net/wp-content/uploads/2025/03/vpscamera2.jpg 844w" sizes="auto, (max-width: 576px) 100vw, 576px" /></figure>
</figure>

<hr class="wp-block-separator has-alpha-channel-opacity"/>

<h4 class="wp-block-heading">MMI reset</h4>

<p class="wp-block-paragraph">After coding, you need to <strong>reset MMI.</strong> Push NAV/MAP, RADIO and the center button simultaneously for a few seconds, then release.</p>

<p class="wp-block-paragraph">To reset the MIB3 on the Q5 Facelift, press the volume button on the center console until the MMI turns back on.</p>

<figure class="wp-block-image size-large"><img loading="lazy" decoding="async" width="1024" height="683" src="https://www.vag-coding.fr/wp-content/uploads/2025/03/reboot-mmi-audi-1024x683.jpg" alt="" class="wp-image-31653" srcset="https://www.vag-coding.net/wp-content/uploads/2025/03/reboot-mmi-audi-1024x683.jpg 1024w, https://www.vag-coding.net/wp-content/uploads/2025/03/reboot-mmi-audi-300x200.jpg 300w, https://www.vag-coding.net/wp-content/uploads/2025/03/reboot-mmi-audi-768x512.jpg 768w, https://www.vag-coding.net/wp-content/uploads/2025/03/reboot-mmi-audi-1536x1024.jpg 1536w, https://www.vag-coding.net/wp-content/uploads/2025/03/reboot-mmi-audi-600x400.jpg 600w, https://www.vag-coding.net/wp-content/uploads/2025/03/reboot-mmi-audi.jpg 1620w" sizes="auto, (max-width: 1024px) 100vw, 1024px" /></figure>

<p class="wp-block-paragraph">The camera must be started when you select reverse gear or press the parking button (P) in the center console. The result:</p>

<figure class="wp-block-image size-large"><img loading="lazy" decoding="async" width="1024" height="768" src="https://www.vag-coding.fr/wp-content/uploads/2025/03/camerarecula4-1024x768.jpg" alt="" class="wp-image-31654" srcset="https://www.vag-coding.net/wp-content/uploads/2025/03/camerarecula4-1024x768.jpg 1024w, https://www.vag-coding.net/wp-content/uploads/2025/03/camerarecula4-300x225.jpg 300w, https://www.vag-coding.net/wp-content/uploads/2025/03/camerarecula4-768x576.jpg 768w, https://www.vag-coding.net/wp-content/uploads/2025/03/camerarecula4-600x450.jpg 600w, https://www.vag-coding.net/wp-content/uploads/2025/03/camerarecula4.jpg 1366w" sizes="auto, (max-width: 1024px) 100vw, 1024px" /></figure>

<p class="wp-block-paragraph"></p>
<button class="simplefavorite-button has-count preset" data-postid="58457" data-siteid="1" data-groupid="1" data-favoritecount="0" style="background-color:#4c9fe8;color:#000000;"><i class="sf-icon-love" style=""></i>Love<span class="simplefavorite-button-count" style="">0</span></button><p>L’article <a href="https://www.vag-coding.net/audi/q5-fy/q5-fy-enable-rearview-camera-retrofit/">Q5 (FY) &#8211; Enable Rearview Camera (Retrofit)</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></content:encoded>
					
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">58457</post-id>	</item>
		<item>
		<title>A5 (F5) &#8211; Enable rearview camera (retrofit)</title>
		<link>https://www.vag-coding.net/audi/a5-f5/a5-f5-enable-rearview-camera-retrofit/</link>
		
		<dc:creator><![CDATA[T0MS]]></dc:creator>
		<pubDate>Mon, 02 Nov 2026 07:20:57 +0000</pubDate>
				<category><![CDATA[A5 (F5)]]></category>
		<category><![CDATA[Camera]]></category>
		<category><![CDATA[MMI Audi]]></category>
		<category><![CDATA[Retrofit]]></category>
		<guid isPermaLink="false">https://www.vag-coding.fr/audi/a5-f5/a5-f5-enable-rearview-camera-retrofit/</guid>

					<description><![CDATA[<p>Purpose: Enables the rearview camera after it has been installed on the MMI (retrofit). Procedure: 1 &#8211; With the engine off and the ignition off, connect your official VAG-COM VCDS cable to the computer, then connect the other end to your vehicle’s diagnostic port. 2 &#8211; Turn on the ignition, then launch the VCDS program.&#46;&#46;&#46;</p>
<p>L’article <a href="https://www.vag-coding.net/audi/a5-f5/a5-f5-enable-rearview-camera-retrofit/">A5 (F5) &#8211; Enable rearview camera (retrofit)</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></description>
										<content:encoded><![CDATA[
<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="1200" height="628" src="https://www.vag-coding.fr/wp-content/uploads/2023/01/AUDI-A5-F5.png" alt="VAG Coding VCDS ODBeleven Audi A5 F5" class="wp-image-6741" srcset="https://www.vag-coding.net/wp-content/uploads/2023/01/AUDI-A5-F5.png 1200w, https://www.vag-coding.net/wp-content/uploads/2023/01/AUDI-A5-F5-300x157.png 300w, https://www.vag-coding.net/wp-content/uploads/2023/01/AUDI-A5-F5-1024x536.png 1024w, https://www.vag-coding.net/wp-content/uploads/2023/01/AUDI-A5-F5-768x402.png 768w, https://www.vag-coding.net/wp-content/uploads/2023/01/AUDI-A5-F5-600x314.png 600w" sizes="auto, (max-width: 1200px) 100vw, 1200px" /></figure>

<p class="wp-block-paragraph"><strong>Purpose:</strong> Enables the rearview camera after it has been installed on the MMI (retrofit). <br/><br/><br/><strong>Procedure:</strong> <br/><strong>1</strong> &#8211; With the engine off and the ignition off, connect your official VAG-COM VCDS cable to the computer, then connect the other end to your vehicle’s diagnostic port.<br/><br/><strong>2</strong> &#8211; Turn on the ignition, then launch the VCDS program.</p>

<p class="wp-block-paragraph"><strong>Wiring : </strong></p>

<ul class="wp-block-list">
<li><strong>2 CAN signal wires</strong> (for communication) &#8211; <strong>Orange-Purple</strong> (CAN High) and <strong>Orange-Brown</strong> (CAN Low)</li>



<li><strong>2 video signal wires</strong> &#8211; <strong>Black</strong> and <strong>transparent</strong></li>



<li><strong>2 power wires</strong> &#8211; <strong>White</strong> (less than 12 V) and <strong>brown</strong> (GND)</li>
</ul>

<p class="wp-block-paragraph"><strong>Line 1:</strong><br/><br/> 3 &#8211; Click on<strong>&#8220;Select&#8221;</strong>, then click on<strong>&#8220;19 &#8211; CAN Gateway</strong>&#8220;.<br/><br/> 4 &#8211; Select <strong>&#8220;Installation List&#8221;</strong><br/><br/> 5 &#8211; Tick:<strong>&#8220;6C &#8211; Rear View Camera</strong>&#8221; in the list</p>

<p class="wp-block-paragraph"><strong>6</strong> &#8211; Save coding</p>

<p class="wp-block-paragraph"><strong>Line 2:</strong><br/><br/><strong>3</strong> &#8211; Click &#8220;<strong>Select</strong>,&#8221; then click &#8220;<strong>6C &#8211; Rear View Camera</strong>.&#8221;<br/><br/><strong>5</strong> &#8211; Click on<strong>&#8220;Coding &#8211; 07</strong>&#8221; then click on<strong>&#8220;Long Coding Helper</strong>&#8220;.<br/><br/><strong>6</strong> &#8211; Select byte <strong>07</strong><br/>Then check bit <strong>0, 1, 2 and 4</strong></p>

<p class="wp-block-paragraph">Example:<br/>Byte 04 &#8211; bit 0 locked at 1 and AHK<br/>Byte 04 &#8211; Bit 1 on 1 &#8211; Front and rear parking aid installed<br/>Byte 04 &#8211; Bit 1 on 0 &#8211; Rear parking aid installed<br/>Byte 04 &#8211; bits 2 on 1 &#8211; Parking unit installed<br/>Byte 07 &#8211; bits 0 on 1 &#8211; Guides through<br/>Byte 07 &#8211; bits 1 on 1 &#8211; Parallel guides<br/>Byte 07 &#8211; Bit 2 on 1 &#8211; Trailer Guides<br/>Byte 07 &#8211; Bit 3 on 1 &#8211; Guide cross<br/>Byte 07 &#8211; Add 4 on 1 &#8211; Park direction aid Guide installed</p>

<p class="wp-block-paragraph"><strong>Line 3</strong> <strong>:</strong><br/><br/><strong>3</strong> &#8211; Click &#8220;<strong>Select</strong>,&#8221; then click &#8220;<strong><strong>&#8220;09 &#8211; Cent. Elect.&#8221;</strong></strong>&#8220;.<br/><br/><strong>4</strong> &#8211; Click on<strong>&#8220;Coding &#8211; 07</strong>&#8221; then click on<strong>&#8220;Long Coding Helper</strong>&#8220;.<br/><br/><strong>5</strong> &#8211; Select byte <strong>35</strong><br/>Then check bit <strong>4</strong></p>

<p class="wp-block-paragraph">If you have an SOS button, the code is different. Byte 35 is missing, so go to <strong>byte 38,</strong> at <strong>Bit 2-3</strong>, select “<strong><strong>04 camera variant_rvc, installed</strong></strong>”. See image below.</p>

<p class="wp-block-paragraph">For the A5 Facelift with MIB3, select <strong>&#8220;Rvcc&#8221;</strong></p>

<figure class="wp-block-image size-large"><img loading="lazy" decoding="async" width="1024" height="576" src="https://www.vag-coding.fr/wp-content/uploads/2025/03/cameraa4-1024x576.jpeg" alt="" class="wp-image-31651" srcset="https://www.vag-coding.net/wp-content/uploads/2025/03/cameraa4-1024x576.jpeg 1024w, https://www.vag-coding.net/wp-content/uploads/2025/03/cameraa4-300x169.jpeg 300w, https://www.vag-coding.net/wp-content/uploads/2025/03/cameraa4-768x432.jpeg 768w, https://www.vag-coding.net/wp-content/uploads/2025/03/cameraa4-1536x864.jpeg 1536w, https://www.vag-coding.net/wp-content/uploads/2025/03/cameraa4-520x293.jpeg 520w, https://www.vag-coding.net/wp-content/uploads/2025/03/cameraa4-600x338.jpeg 600w, https://www.vag-coding.net/wp-content/uploads/2025/03/cameraa4.jpeg 1920w" sizes="auto, (max-width: 1024px) 100vw, 1024px" /></figure>

<figure class="wp-block-image size-large"><img loading="lazy" decoding="async" width="576" height="1024" src="https://www.vag-coding.fr/wp-content/uploads/2025/03/obdelevencamera-576x1024.jpg" alt="" class="wp-image-31658" srcset="https://www.vag-coding.net/wp-content/uploads/2025/03/obdelevencamera-576x1024.jpg 576w, https://www.vag-coding.net/wp-content/uploads/2025/03/obdelevencamera-169x300.jpg 169w, https://www.vag-coding.net/wp-content/uploads/2025/03/obdelevencamera-768x1365.jpg 768w, https://www.vag-coding.net/wp-content/uploads/2025/03/obdelevencamera-600x1066.jpg 600w, https://www.vag-coding.net/wp-content/uploads/2025/03/obdelevencamera.jpg 844w" sizes="auto, (max-width: 576px) 100vw, 576px" /></figure>

<p class="wp-block-paragraph"><strong>Line 4:</strong><br/><br/><strong>3</strong> &#8211; Click &#8220;<strong>Select</strong>,&#8221; then click &#8220;<strong>5F – Electrical Information.</strong>&#8220;<br/><br/><strong>4</strong> &#8211; Click &#8220;<strong>Security Access &#8211; 16</strong>,&#8221; then enter the code &#8220;<strong>20103</strong>&#8220;<br/><br/><strong>5</strong> &#8211; Click on &#8220;<strong>Adaptation &#8211; 10</strong>&#8220;<br/><br/><strong>6</strong> &#8211; At the very top of this page, there is a drop-down menu.<br/>From this drop-down menu, select &#8220;<strong><strong>Car Function List BAP Gen2 &#8211; VPS_0x0B</strong></strong>&#8220;<br/><br/><strong>7</strong> &#8211; On this same page, there is a second drop-down menu, but further down<br/>the page.<br/>From this menu, select the value &#8220;<strong>active</strong>&#8220;</p>

<p class="wp-block-paragraph"><strong>Line 5:</strong><br/><br/><strong>3</strong> &#8211; Click &#8220;<strong>Select</strong>,&#8221; then click &#8220;<strong>5F – Electrical Information.</strong>&#8220;<br/><br/><strong>4</strong> &#8211; Click &#8220;<strong>Security Access &#8211; 16</strong>,&#8221; then enter the code &#8220;<strong>20103</strong>&#8220;<br/><br/><strong>5</strong> &#8211; Click on<strong>“Adaptation &#8211; 10</strong>”.<br/><br/><strong>6</strong> &#8211; On this page, at the very top, there is a drop-down menu.<br/>In this drop-down menu, choose &#8220;<strong><strong><strong>Car Function List BAP Gen2 &#8211; VPS_0x0B_msg_bus</strong></strong></strong>&#8220;<br/><br/><strong>7</strong> &#8211; On this same page, there is a second drop-down menu at the bottom<br/>of the page.<br/>On this menu, choose the value &#8220;<strong><strong>Terminal 15</strong></strong>&#8220;</p>

<p class="wp-block-paragraph">For the A5 Facelift with MIB3, search for: &#8220;<strong>Vehicle function list BAP</strong>&#8220;</p>

<figure class="wp-block-gallery has-nested-images columns-default is-cropped wp-block-gallery-2 is-layout-flex wp-block-gallery-is-layout-flex">
<figure class="wp-block-image size-large"><img loading="lazy" decoding="async" width="576" height="1024" data-id="31660" src="https://www.vag-coding.fr/wp-content/uploads/2025/03/vpscamera-576x1024.jpg" alt="" class="wp-image-31660" srcset="https://www.vag-coding.net/wp-content/uploads/2025/03/vpscamera-576x1024.jpg 576w, https://www.vag-coding.net/wp-content/uploads/2025/03/vpscamera-169x300.jpg 169w, https://www.vag-coding.net/wp-content/uploads/2025/03/vpscamera-768x1365.jpg 768w, https://www.vag-coding.net/wp-content/uploads/2025/03/vpscamera-600x1066.jpg 600w, https://www.vag-coding.net/wp-content/uploads/2025/03/vpscamera.jpg 844w" sizes="auto, (max-width: 576px) 100vw, 576px" /></figure>



<figure class="wp-block-image size-large"><img loading="lazy" decoding="async" width="576" height="1024" data-id="31661" src="https://www.vag-coding.fr/wp-content/uploads/2025/03/vpscamera2-576x1024.jpg" alt="" class="wp-image-31661" srcset="https://www.vag-coding.net/wp-content/uploads/2025/03/vpscamera2-576x1024.jpg 576w, https://www.vag-coding.net/wp-content/uploads/2025/03/vpscamera2-169x300.jpg 169w, https://www.vag-coding.net/wp-content/uploads/2025/03/vpscamera2-768x1365.jpg 768w, https://www.vag-coding.net/wp-content/uploads/2025/03/vpscamera2-600x1066.jpg 600w, https://www.vag-coding.net/wp-content/uploads/2025/03/vpscamera2.jpg 844w" sizes="auto, (max-width: 576px) 100vw, 576px" /></figure>
</figure>

<hr class="wp-block-separator has-alpha-channel-opacity"/>

<h4 class="wp-block-heading">MMI reset</h4>

<p class="wp-block-paragraph">After coding, you need to <strong>reset MMI.</strong> Push NAV/MAP, RADIO and the center button simultaneously for a few seconds, then release.</p>

<p class="wp-block-paragraph">To reset the MIB3 on the A5 Facelift, press the volume button on the center console until the MMI turns back on.</p>

<figure class="wp-block-image size-large"><img loading="lazy" decoding="async" width="1024" height="683" src="https://www.vag-coding.fr/wp-content/uploads/2025/03/reboot-mmi-audi-1024x683.jpg" alt="" class="wp-image-31653" srcset="https://www.vag-coding.net/wp-content/uploads/2025/03/reboot-mmi-audi-1024x683.jpg 1024w, https://www.vag-coding.net/wp-content/uploads/2025/03/reboot-mmi-audi-300x200.jpg 300w, https://www.vag-coding.net/wp-content/uploads/2025/03/reboot-mmi-audi-768x512.jpg 768w, https://www.vag-coding.net/wp-content/uploads/2025/03/reboot-mmi-audi-1536x1024.jpg 1536w, https://www.vag-coding.net/wp-content/uploads/2025/03/reboot-mmi-audi-600x400.jpg 600w, https://www.vag-coding.net/wp-content/uploads/2025/03/reboot-mmi-audi.jpg 1620w" sizes="auto, (max-width: 1024px) 100vw, 1024px" /></figure>

<p class="wp-block-paragraph">The camera must be started when you select reverse gear or press the parking button (P) in the center console. The result:</p>

<figure class="wp-block-image size-large"><img loading="lazy" decoding="async" width="1024" height="768" src="https://www.vag-coding.fr/wp-content/uploads/2025/03/camerarecula4-1024x768.jpg" alt="" class="wp-image-31654" srcset="https://www.vag-coding.net/wp-content/uploads/2025/03/camerarecula4-1024x768.jpg 1024w, https://www.vag-coding.net/wp-content/uploads/2025/03/camerarecula4-300x225.jpg 300w, https://www.vag-coding.net/wp-content/uploads/2025/03/camerarecula4-768x576.jpg 768w, https://www.vag-coding.net/wp-content/uploads/2025/03/camerarecula4-600x450.jpg 600w, https://www.vag-coding.net/wp-content/uploads/2025/03/camerarecula4.jpg 1366w" sizes="auto, (max-width: 1024px) 100vw, 1024px" /></figure>

<p class="wp-block-paragraph"></p>
<button class="simplefavorite-button has-count preset" data-postid="58452" data-siteid="1" data-groupid="1" data-favoritecount="0" style="background-color:#4c9fe8;color:#000000;"><i class="sf-icon-love" style=""></i>Love<span class="simplefavorite-button-count" style="">0</span></button><p>L’article <a href="https://www.vag-coding.net/audi/a5-f5/a5-f5-enable-rearview-camera-retrofit/">A5 (F5) &#8211; Enable rearview camera (retrofit)</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></content:encoded>
					
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">58452</post-id>	</item>
		<item>
		<title>Arteon (3H) &#8211; Turn on the Area View 360 lighting</title>
		<link>https://www.vag-coding.net/vw/arteon-3h/arteon-3h-turn-on-the-area-view-360-lighting/</link>
		
		<dc:creator><![CDATA[T0MS]]></dc:creator>
		<pubDate>Thu, 15 Oct 2026 19:26:19 +0000</pubDate>
				<category><![CDATA[Arteon (3H)]]></category>
		<category><![CDATA[Camera]]></category>
		<category><![CDATA[Mirrors]]></category>
		<category><![CDATA[Parking Assistance]]></category>
		<guid isPermaLink="false">https://www.vag-coding.fr/vw/arteon-3h/arteon-3h-turn-on-the-area-view-360-lighting/</guid>

					<description><![CDATA[<p>Purpose: Enables the proximity lights under the side mirrors during maneuvers with Area View 360, when light conditions are poor or at night. Compatible with 6C control module (Area View or High-Resolution Rearview Camera), with software version 0607 or higher. Warning! There are 2 lines of coding to do here. Proceed : 1 &#8211; Engine&#46;&#46;&#46;</p>
<p>L’article <a href="https://www.vag-coding.net/vw/arteon-3h/arteon-3h-turn-on-the-area-view-360-lighting/">Arteon (3H) &#8211; Turn on the Area View 360 lighting</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></description>
										<content:encoded><![CDATA[
<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="1200" height="628" src="https://www.vag-coding.fr/wp-content/uploads/2023/01/vw-arteon-3h.png" alt="VAG Coding VCDS ODBeleven VW Arteon 3H" class="wp-image-6181" srcset="https://www.vag-coding.net/wp-content/uploads/2023/01/vw-arteon-3h.png 1200w, https://www.vag-coding.net/wp-content/uploads/2023/01/vw-arteon-3h-300x157.png 300w, https://www.vag-coding.net/wp-content/uploads/2023/01/vw-arteon-3h-1024x536.png 1024w, https://www.vag-coding.net/wp-content/uploads/2023/01/vw-arteon-3h-768x402.png 768w, https://www.vag-coding.net/wp-content/uploads/2023/01/vw-arteon-3h-600x314.png 600w" sizes="auto, (max-width: 1200px) 100vw, 1200px" /></figure>

<p class="wp-block-paragraph"><strong>Purpose:</strong> Enables the proximity lights under the side mirrors during maneuvers with Area View 360, when light conditions are poor or at night. Compatible with 6C control module (Area View or High-Resolution Rearview Camera), with software version 0607 or higher.   <br/><br/><br/><strong>Warning! There are 2 lines of coding to do here. </strong> <br/><br/><strong>Proceed :</strong> <br/><strong>1</strong> &#8211; Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle&#8217;s diagnostics socket.<br/><br/><strong>2</strong> &#8211; Switch on the ignition and run the VCDS program.</p>

<p class="wp-block-paragraph"><br/><br/><strong>Line 1:</strong><br/><br/><strong>3</strong> &#8211; Click on<strong>“Select</strong>”, then click on<strong>“09 &#8211; Cent. Elect.</strong>”.<br/><br/><strong>4</strong> &#8211; Click on<strong>“Security Access &#8211; 16</strong>” then enter the code<strong>“31347</strong>”.<br/><br/><strong>5</strong> &#8211; Click on<strong>“Adaptation &#8211; 10</strong>”.<br/><br/><strong>6</strong> &#8211; At the very top of this page, there is a drop-down menu.<br/>From this drop-down menu, select <strong>“Aussenlicht_uebergreifend – Umfeldleuchte als Manoevrierleuchte.”</strong></p>

<p class="wp-block-paragraph"><strong>7</strong> &#8211; On this same page there is a second drop-down menu, but towards the bottom<br/> of the page.<br/> On the latter, select &#8221; <strong>Active</strong> <em>&#8220;</em> and then confirm.</p>

<p class="wp-block-paragraph"><br/><br/><strong>Line 2:</strong><br/><br/><strong>3</strong> &#8211; Click &#8220;<strong>Select</strong>,&#8221; then click &#8220;<strong>6C &#8211; Rear View Camera / Area View</strong>.&#8221;<br/><br/><strong>4</strong> &#8211; Click on<strong>&#8220;Coding &#8211; 07</strong>&#8221; then click on<strong>&#8220;Long Coding Helper</strong>&#8220;.<br/><br/><strong>5</strong> &#8211; Select byte &#8220;<strong>08</strong>&#8220;<br/>. Then check bit &#8220;<strong>2</strong>&#8220;: &#8220;<strong>Manoeuve Light</strong>&#8220;</p>

<p class="wp-block-paragraph"></p>
<div class="wp-block-image">
<figure class="aligncenter size-full"><img loading="lazy" decoding="async" width="711" height="431" src="https://www.vag-coding.fr/wp-content/uploads/2026/10/areaviewlight.jpg" alt="" class="wp-image-57699" srcset="https://www.vag-coding.net/wp-content/uploads/2026/10/areaviewlight.jpg 711w, https://www.vag-coding.net/wp-content/uploads/2026/10/areaviewlight-300x182.jpg 300w, https://www.vag-coding.net/wp-content/uploads/2026/10/areaviewlight-600x364.jpg 600w" sizes="auto, (max-width: 711px) 100vw, 711px" /></figure>
</div><button class="simplefavorite-button has-count preset" data-postid="57728" data-siteid="1" data-groupid="1" data-favoritecount="0" style="background-color:#4c9fe8;color:#000000;"><i class="sf-icon-love" style=""></i>Love<span class="simplefavorite-button-count" style="">0</span></button><p>L’article <a href="https://www.vag-coding.net/vw/arteon-3h/arteon-3h-turn-on-the-area-view-360-lighting/">Arteon (3H) &#8211; Turn on the Area View 360 lighting</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></content:encoded>
					
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">57728</post-id>	</item>
		<item>
		<title>Kodiaq (NS) &#8211; Turn on the Area View 360 lighting</title>
		<link>https://www.vag-coding.net/skoda/kodiaq-ns/kodiaq-ns-turn-on-the-area-view-360-lighting/</link>
		
		<dc:creator><![CDATA[T0MS]]></dc:creator>
		<pubDate>Thu, 15 Oct 2026 19:15:01 +0000</pubDate>
				<category><![CDATA[Kodiaq (NS)]]></category>
		<category><![CDATA[Camera]]></category>
		<category><![CDATA[Mirrors]]></category>
		<category><![CDATA[Parking Assistance]]></category>
		<guid isPermaLink="false">https://www.vag-coding.fr/skoda/kodiaq-ns/kodiaq-ns-turn-on-the-area-view-360-lighting/</guid>

					<description><![CDATA[<p>Purpose: Enables the proximity lights under the side mirrors during maneuvers with Area View 360, when light conditions are poor or at night. Compatible with 6C control module (Area View or High-Resolution Rearview Camera), with software version 0607 or higher. Warning! There are 2 lines of coding to do here. Proceed : 1 &#8211; Engine&#46;&#46;&#46;</p>
<p>L’article <a href="https://www.vag-coding.net/skoda/kodiaq-ns/kodiaq-ns-turn-on-the-area-view-360-lighting/">Kodiaq (NS) &#8211; Turn on the Area View 360 lighting</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></description>
										<content:encoded><![CDATA[
<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="1200" height="628" src="https://www.vag-coding.fr/wp-content/uploads/2023/01/SKODA-KODIAQ-NS.png" alt="VAG Coding VCDS ODBeleven Skoda Kodiaq NS" class="wp-image-6206" srcset="https://www.vag-coding.net/wp-content/uploads/2023/01/SKODA-KODIAQ-NS.png 1200w, https://www.vag-coding.net/wp-content/uploads/2023/01/SKODA-KODIAQ-NS-300x157.png 300w, https://www.vag-coding.net/wp-content/uploads/2023/01/SKODA-KODIAQ-NS-1024x536.png 1024w, https://www.vag-coding.net/wp-content/uploads/2023/01/SKODA-KODIAQ-NS-768x402.png 768w, https://www.vag-coding.net/wp-content/uploads/2023/01/SKODA-KODIAQ-NS-600x314.png 600w" sizes="auto, (max-width: 1200px) 100vw, 1200px" /></figure>

<p class="wp-block-paragraph"><strong>Purpose:</strong> Enables the proximity lights under the side mirrors during maneuvers with Area View 360, when light conditions are poor or at night. Compatible with 6C control module (Area View or High-Resolution Rearview Camera), with software version 0607 or higher.   <br/><br/><br/><strong>Warning! There are 2 lines of coding to do here. </strong> <br/><br/><strong>Proceed :</strong> <br/><strong>1</strong> &#8211; Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle&#8217;s diagnostics socket.<br/><br/><strong>2</strong> &#8211; Switch on the ignition and run the VCDS program.</p>

<p class="wp-block-paragraph"><br/><br/><strong>Line 1:</strong><br/><br/><strong>3</strong> &#8211; Click on<strong>“Select</strong>”, then click on<strong>“09 &#8211; Cent. Elect.</strong>”.<br/><br/><strong>4</strong> &#8211; Click on<strong>“Security Access &#8211; 16</strong>” then enter the code<strong>“31347</strong>”.<br/><br/><strong>5</strong> &#8211; Click on<strong>“Adaptation &#8211; 10</strong>”.<br/><br/><strong>6</strong> &#8211; At the very top of this page, there is a drop-down menu.<br/>From this drop-down menu, select <strong>“Aussenlicht_uebergreifend – Umfeldleuchte als Manoevrierleuchte.”</strong></p>

<p class="wp-block-paragraph"><strong>7</strong> &#8211; On this same page there is a second drop-down menu, but towards the bottom<br/> of the page.<br/> On the latter, select &#8221; <strong>Active</strong> <em>&#8220;</em> and then confirm.</p>

<p class="wp-block-paragraph"><br/><br/><strong>Line 2:</strong><br/><br/><strong>3</strong> &#8211; Click &#8220;<strong>Select</strong>,&#8221; then click &#8220;<strong>6C &#8211; Rear View Camera / Area View</strong>.&#8221;<br/><br/><strong>4</strong> &#8211; Click on<strong>&#8220;Coding &#8211; 07</strong>&#8221; then click on<strong>&#8220;Long Coding Helper</strong>&#8220;.<br/><br/><strong>5</strong> &#8211; Select byte &#8220;<strong>08</strong>&#8220;<br/>. Then check bit &#8220;<strong>2</strong>&#8220;: &#8220;<strong>Manoeuve Light</strong>&#8220;</p>

<p class="wp-block-paragraph"></p>
<div class="wp-block-image">
<figure class="aligncenter size-full"><img loading="lazy" decoding="async" width="711" height="431" src="https://www.vag-coding.fr/wp-content/uploads/2026/10/areaviewlight.jpg" alt="" class="wp-image-57699" srcset="https://www.vag-coding.net/wp-content/uploads/2026/10/areaviewlight.jpg 711w, https://www.vag-coding.net/wp-content/uploads/2026/10/areaviewlight-300x182.jpg 300w, https://www.vag-coding.net/wp-content/uploads/2026/10/areaviewlight-600x364.jpg 600w" sizes="auto, (max-width: 711px) 100vw, 711px" /></figure>
</div><button class="simplefavorite-button has-count preset" data-postid="57724" data-siteid="1" data-groupid="1" data-favoritecount="0" style="background-color:#4c9fe8;color:#000000;"><i class="sf-icon-love" style=""></i>Love<span class="simplefavorite-button-count" style="">0</span></button><p>L’article <a href="https://www.vag-coding.net/skoda/kodiaq-ns/kodiaq-ns-turn-on-the-area-view-360-lighting/">Kodiaq (NS) &#8211; Turn on the Area View 360 lighting</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></content:encoded>
					
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">57724</post-id>	</item>
		<item>
		<title>Superb (3V) &#8211; Turn on the Area View 360 lighting</title>
		<link>https://www.vag-coding.net/skoda/superb-3v/superb-3v-turn-on-the-area-view-360-lighting/</link>
		
		<dc:creator><![CDATA[T0MS]]></dc:creator>
		<pubDate>Thu, 15 Oct 2026 19:14:11 +0000</pubDate>
				<category><![CDATA[Superb (3V)]]></category>
		<category><![CDATA[Camera]]></category>
		<category><![CDATA[Mirrors]]></category>
		<category><![CDATA[Parking Assistance]]></category>
		<guid isPermaLink="false">https://www.vag-coding.fr/skoda/superb-3v/superb-3v-turn-on-the-area-view-360-lighting/</guid>

					<description><![CDATA[<p>Purpose: Enables the proximity lights under the side mirrors during maneuvers with Area View 360, when light conditions are poor or at night. Compatible with 6C control module (Area View or High-Resolution Rearview Camera), with software version 0607 or higher. Warning! There are 2 lines of coding to do here. Proceed : 1 &#8211; Engine&#46;&#46;&#46;</p>
<p>L’article <a href="https://www.vag-coding.net/skoda/superb-3v/superb-3v-turn-on-the-area-view-360-lighting/">Superb (3V) &#8211; Turn on the Area View 360 lighting</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></description>
										<content:encoded><![CDATA[<div class="wp-block-image">
<figure class="aligncenter size-full"><img loading="lazy" decoding="async" width="428" height="321" src="https://www.vag-coding.fr/wp-content/uploads/2022/12/skoda_superb_3v.png" alt="VAG Coding VCDS ODBeleven Skoda Superb 3V" class="wp-image-5100" srcset="https://www.vag-coding.net/wp-content/uploads/2022/12/skoda_superb_3v.png 428w, https://www.vag-coding.net/wp-content/uploads/2022/12/skoda_superb_3v-300x225.png 300w" sizes="auto, (max-width: 428px) 100vw, 428px" /></figure>
</div>
<p class="wp-block-paragraph"><strong>Purpose:</strong> Enables the proximity lights under the side mirrors during maneuvers with Area View 360, when light conditions are poor or at night. Compatible with 6C control module (Area View or High-Resolution Rearview Camera), with software version 0607 or higher.   <br/><br/><br/><strong>Warning! There are 2 lines of coding to do here. </strong> <br/><br/><strong>Proceed :</strong> <br/><strong>1</strong> &#8211; Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle&#8217;s diagnostics socket.<br/><br/><strong>2</strong> &#8211; Switch on the ignition and run the VCDS program.</p>

<p class="wp-block-paragraph"><br/><br/><strong>Line 1:</strong><br/><br/><strong>3</strong> &#8211; Click on<strong>“Select</strong>”, then click on<strong>“09 &#8211; Cent. Elect.</strong>”.<br/><br/><strong>4</strong> &#8211; Click on<strong>“Security Access &#8211; 16</strong>” then enter the code<strong>“31347</strong>”.<br/><br/><strong>5</strong> &#8211; Click on<strong>“Adaptation &#8211; 10</strong>”.<br/><br/><strong>6</strong> &#8211; At the very top of this page, there is a drop-down menu.<br/>From this drop-down menu, select <strong>“Aussenlicht_uebergreifend – Umfeldleuchte als Manoevrierleuchte.”</strong></p>

<p class="wp-block-paragraph"><strong>7</strong> &#8211; On this same page there is a second drop-down menu, but towards the bottom<br/> of the page.<br/> On the latter, select &#8221; <strong>Active</strong> <em>&#8220;</em> and then confirm.</p>

<p class="wp-block-paragraph"><br/><br/><strong>Line 2:</strong><br/><br/><strong>3</strong> &#8211; Click &#8220;<strong>Select</strong>,&#8221; then click &#8220;<strong>6C &#8211; Rear View Camera / Area View</strong>.&#8221;<br/><br/><strong>4</strong> &#8211; Click on<strong>&#8220;Coding &#8211; 07</strong>&#8221; then click on<strong>&#8220;Long Coding Helper</strong>&#8220;.<br/><br/><strong>5</strong> &#8211; Select byte &#8220;<strong>08</strong>&#8220;<br/>. Then check bit &#8220;<strong>2</strong>&#8220;: &#8220;<strong>Manoeuve Light</strong>&#8220;</p>

<p class="wp-block-paragraph"></p>
<div class="wp-block-image">
<figure class="aligncenter size-full"><img loading="lazy" decoding="async" width="711" height="431" src="https://www.vag-coding.fr/wp-content/uploads/2026/10/areaviewlight.jpg" alt="" class="wp-image-57699" srcset="https://www.vag-coding.net/wp-content/uploads/2026/10/areaviewlight.jpg 711w, https://www.vag-coding.net/wp-content/uploads/2026/10/areaviewlight-300x182.jpg 300w, https://www.vag-coding.net/wp-content/uploads/2026/10/areaviewlight-600x364.jpg 600w" sizes="auto, (max-width: 711px) 100vw, 711px" /></figure>
</div><button class="simplefavorite-button has-count preset" data-postid="57722" data-siteid="1" data-groupid="1" data-favoritecount="0" style="background-color:#4c9fe8;color:#000000;"><i class="sf-icon-love" style=""></i>Love<span class="simplefavorite-button-count" style="">0</span></button><p>L’article <a href="https://www.vag-coding.net/skoda/superb-3v/superb-3v-turn-on-the-area-view-360-lighting/">Superb (3V) &#8211; Turn on the Area View 360 lighting</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></content:encoded>
					
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">57722</post-id>	</item>
		<item>
		<title>Ateca (5F) &#8211; Turn on the Area View 360 lighting</title>
		<link>https://www.vag-coding.net/seat-cupra/ateca-5f/ateca-5f-turn-on-the-area-view-360-lighting/</link>
		
		<dc:creator><![CDATA[T0MS]]></dc:creator>
		<pubDate>Thu, 15 Oct 2026 19:13:28 +0000</pubDate>
				<category><![CDATA[Ateca (5F)]]></category>
		<category><![CDATA[Camera]]></category>
		<category><![CDATA[Mirrors]]></category>
		<category><![CDATA[Parking Assistance]]></category>
		<guid isPermaLink="false">https://www.vag-coding.fr/seat-cupra/ateca-5f/ateca-5f-turn-on-the-area-view-360-lighting/</guid>

					<description><![CDATA[<p>Purpose: Enables the proximity lights under the side mirrors during maneuvers with Area View 360, when light conditions are poor or at night. Compatible with 6C control module (Area View or High-Resolution Rearview Camera), with software version 0607 or higher. Warning! There are 2 lines of coding to do here. Proceed : 1 &#8211; Engine&#46;&#46;&#46;</p>
<p>L’article <a href="https://www.vag-coding.net/seat-cupra/ateca-5f/ateca-5f-turn-on-the-area-view-360-lighting/">Ateca (5F) &#8211; Turn on the Area View 360 lighting</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></description>
										<content:encoded><![CDATA[
<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="1200" height="628" src="https://www.vag-coding.fr/wp-content/uploads/2022/12/SEAT-ATECA.png" alt="VAG Coding VCDS ODBeleven Seat Ateca 5F" class="wp-image-1874" srcset="https://www.vag-coding.net/wp-content/uploads/2022/12/SEAT-ATECA.png 1200w, https://www.vag-coding.net/wp-content/uploads/2022/12/SEAT-ATECA-300x157.png 300w, https://www.vag-coding.net/wp-content/uploads/2022/12/SEAT-ATECA-1024x536.png 1024w, https://www.vag-coding.net/wp-content/uploads/2022/12/SEAT-ATECA-768x402.png 768w, https://www.vag-coding.net/wp-content/uploads/2022/12/SEAT-ATECA-600x314.png 600w" sizes="auto, (max-width: 1200px) 100vw, 1200px" /></figure>

<p class="wp-block-paragraph"><strong>Purpose:</strong> Enables the proximity lights under the side mirrors during maneuvers with Area View 360, when light conditions are poor or at night. Compatible with 6C control module (Area View or High-Resolution Rearview Camera), with software version 0607 or higher.   <br/><br/><br/><strong>Warning! There are 2 lines of coding to do here. </strong> <br/><br/><strong>Proceed :</strong> <br/><strong>1</strong> &#8211; Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle&#8217;s diagnostics socket.<br/><br/><strong>2</strong> &#8211; Switch on the ignition and run the VCDS program.</p>

<p class="wp-block-paragraph"><br/><br/><strong>Line 1:</strong><br/><br/><strong>3</strong> &#8211; Click on<strong>“Select</strong>”, then click on<strong>“09 &#8211; Cent. Elect.</strong>”.<br/><br/><strong>4</strong> &#8211; Click on<strong>“Security Access &#8211; 16</strong>” then enter the code<strong>“31347</strong>”.<br/><br/><strong>5</strong> &#8211; Click on<strong>“Adaptation &#8211; 10</strong>”.<br/><br/><strong>6</strong> &#8211; At the very top of this page, there is a drop-down menu.<br/>From this drop-down menu, select <strong>“Aussenlicht_uebergreifend – Umfeldleuchte als Manoevrierleuchte.”</strong></p>

<p class="wp-block-paragraph"><strong>7</strong> &#8211; On this same page there is a second drop-down menu, but towards the bottom<br/> of the page.<br/> On the latter, select &#8221; <strong>Active</strong> <em>&#8220;</em> and then confirm.</p>

<p class="wp-block-paragraph"><br/><br/><strong>Line 2:</strong><br/><br/><strong>3</strong> &#8211; Click &#8220;<strong>Select</strong>,&#8221; then click &#8220;<strong>6C &#8211; Rear View Camera / Area View</strong>.&#8221;<br/><br/><strong>4</strong> &#8211; Click on<strong>&#8220;Coding &#8211; 07</strong>&#8221; then click on<strong>&#8220;Long Coding Helper</strong>&#8220;.<br/><br/><strong>5</strong> &#8211; Select byte &#8220;<strong>08</strong>&#8220;<br/>. Then check bit &#8220;<strong>2</strong>&#8220;: &#8220;<strong>Manoeuve Light</strong>&#8220;</p>

<p class="wp-block-paragraph"></p>
<div class="wp-block-image">
<figure class="aligncenter size-full"><img loading="lazy" decoding="async" width="711" height="431" src="https://www.vag-coding.fr/wp-content/uploads/2026/10/areaviewlight.jpg" alt="" class="wp-image-57699" srcset="https://www.vag-coding.net/wp-content/uploads/2026/10/areaviewlight.jpg 711w, https://www.vag-coding.net/wp-content/uploads/2026/10/areaviewlight-300x182.jpg 300w, https://www.vag-coding.net/wp-content/uploads/2026/10/areaviewlight-600x364.jpg 600w" sizes="auto, (max-width: 711px) 100vw, 711px" /></figure>
</div><button class="simplefavorite-button has-count preset" data-postid="57726" data-siteid="1" data-groupid="1" data-favoritecount="0" style="background-color:#4c9fe8;color:#000000;"><i class="sf-icon-love" style=""></i>Love<span class="simplefavorite-button-count" style="">0</span></button><p>L’article <a href="https://www.vag-coding.net/seat-cupra/ateca-5f/ateca-5f-turn-on-the-area-view-360-lighting/">Ateca (5F) &#8211; Turn on the Area View 360 lighting</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></content:encoded>
					
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">57726</post-id>	</item>
		<item>
		<title>Tiguan 2 (AD1) &#8211; Turn on the Area View 360 lighting</title>
		<link>https://www.vag-coding.net/vw/tiguan-2-ad1/tiguan-2-ad1-turn-on-the-area-view-360-lighting/</link>
		
		<dc:creator><![CDATA[T0MS]]></dc:creator>
		<pubDate>Thu, 15 Oct 2026 19:12:57 +0000</pubDate>
				<category><![CDATA[Tiguan 2 (AD1)]]></category>
		<category><![CDATA[Camera]]></category>
		<category><![CDATA[Mirrors]]></category>
		<category><![CDATA[Parking Assistance]]></category>
		<guid isPermaLink="false">https://www.vag-coding.fr/vw/tiguan-2-ad1/tiguan-2-ad1-turn-on-the-area-view-360-lighting/</guid>

					<description><![CDATA[<p>Purpose: Enables the proximity lights under the side mirrors during maneuvers with Area View 360, when light conditions are poor or at night. Compatible with 6C control module (Area View or High-Resolution Rearview Camera), with software version 0607 or higher. Warning! There are 2 lines of coding to do here. Proceed : 1 &#8211; Engine&#46;&#46;&#46;</p>
<p>L’article <a href="https://www.vag-coding.net/vw/tiguan-2-ad1/tiguan-2-ad1-turn-on-the-area-view-360-lighting/">Tiguan 2 (AD1) &#8211; Turn on the Area View 360 lighting</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></description>
										<content:encoded><![CDATA[
<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="1200" height="600" src="https://www.vag-coding.fr/wp-content/uploads/2022/12/VW-TIGUAN-AD1.png" alt="VAG Coding VCDS ODBeleven VW Tiguan 2 AD1" class="wp-image-5568" srcset="https://www.vag-coding.net/wp-content/uploads/2022/12/VW-TIGUAN-AD1.png 1200w, https://www.vag-coding.net/wp-content/uploads/2022/12/VW-TIGUAN-AD1-300x150.png 300w, https://www.vag-coding.net/wp-content/uploads/2022/12/VW-TIGUAN-AD1-768x384.png 768w, https://www.vag-coding.net/wp-content/uploads/2022/12/VW-TIGUAN-AD1-1024x512.png 1024w, https://www.vag-coding.net/wp-content/uploads/2022/12/VW-TIGUAN-AD1-600x300.png 600w" sizes="auto, (max-width: 1200px) 100vw, 1200px" /></figure>

<p class="wp-block-paragraph"><strong>Purpose:</strong> Enables the proximity lights under the side mirrors during maneuvers with Area View 360, when light conditions are poor or at night. Compatible with 6C control module (Area View or High-Resolution Rearview Camera), with software version 0607 or higher.   <br/><br/><br/><strong>Warning! There are 2 lines of coding to do here. </strong> <br/><br/><strong>Proceed :</strong> <br/><strong>1</strong> &#8211; Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle&#8217;s diagnostics socket.<br/><br/><strong>2</strong> &#8211; Switch on the ignition and run the VCDS program.</p>

<p class="wp-block-paragraph"><br/><br/><strong>Line 1:</strong><br/><br/><strong>3</strong> &#8211; Click on<strong>“Select</strong>”, then click on<strong>“09 &#8211; Cent. Elect.</strong>”.<br/><br/><strong>4</strong> &#8211; Click on<strong>“Security Access &#8211; 16</strong>” then enter the code<strong>“31347</strong>”.<br/><br/><strong>5</strong> &#8211; Click on<strong>“Adaptation &#8211; 10</strong>”.<br/><br/><strong>6</strong> &#8211; At the very top of this page, there is a drop-down menu.<br/>From this drop-down menu, select <strong>“Aussenlicht_uebergreifend – Umfeldleuchte als Manoevrierleuchte.”</strong></p>

<p class="wp-block-paragraph"><strong>7</strong> &#8211; On this same page there is a second drop-down menu, but towards the bottom<br/> of the page.<br/> On the latter, select &#8221; <strong>Active</strong> <em>&#8220;</em> and then confirm.</p>

<p class="wp-block-paragraph"><br/><br/><strong>Line 2:</strong><br/><br/><strong>3</strong> &#8211; Click &#8220;<strong>Select</strong>,&#8221; then click &#8220;<strong>6C &#8211; Rear View Camera / Area View</strong>.&#8221;<br/><br/><strong>4</strong> &#8211; Click on<strong>&#8220;Coding &#8211; 07</strong>&#8221; then click on<strong>&#8220;Long Coding Helper</strong>&#8220;.<br/><br/><strong>5</strong> &#8211; Select byte &#8220;<strong>08</strong>&#8220;<br/>. Then check bit &#8220;<strong>2</strong>&#8220;: &#8220;<strong>Manoeuve Light</strong>&#8220;</p>

<p class="wp-block-paragraph"></p>
<div class="wp-block-image">
<figure class="aligncenter size-full"><img loading="lazy" decoding="async" width="711" height="431" src="https://www.vag-coding.fr/wp-content/uploads/2026/10/areaviewlight.jpg" alt="" class="wp-image-57699" srcset="https://www.vag-coding.net/wp-content/uploads/2026/10/areaviewlight.jpg 711w, https://www.vag-coding.net/wp-content/uploads/2026/10/areaviewlight-300x182.jpg 300w, https://www.vag-coding.net/wp-content/uploads/2026/10/areaviewlight-600x364.jpg 600w" sizes="auto, (max-width: 711px) 100vw, 711px" /></figure>
</div><button class="simplefavorite-button has-count preset" data-postid="57720" data-siteid="1" data-groupid="1" data-favoritecount="0" style="background-color:#4c9fe8;color:#000000;"><i class="sf-icon-love" style=""></i>Love<span class="simplefavorite-button-count" style="">0</span></button><p>L’article <a href="https://www.vag-coding.net/vw/tiguan-2-ad1/tiguan-2-ad1-turn-on-the-area-view-360-lighting/">Tiguan 2 (AD1) &#8211; Turn on the Area View 360 lighting</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></content:encoded>
					
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">57720</post-id>	</item>
		<item>
		<title>Passat (B8) &#8211; Turn on the Area View 360 lighting</title>
		<link>https://www.vag-coding.net/vw/passat-b8/passat-b8-turn-on-the-area-view-360-lighting/</link>
		
		<dc:creator><![CDATA[T0MS]]></dc:creator>
		<pubDate>Thu, 15 Oct 2026 19:08:38 +0000</pubDate>
				<category><![CDATA[Passat (B8)]]></category>
		<category><![CDATA[Camera]]></category>
		<category><![CDATA[Mirrors]]></category>
		<category><![CDATA[Parking Assistance]]></category>
		<guid isPermaLink="false">https://www.vag-coding.fr/vw/passat-b8/passat-b8-turn-on-the-area-view-360-lighting/</guid>

					<description><![CDATA[<p>Purpose: Enables the proximity lights under the side mirrors during maneuvers with Area View 360, when light conditions are poor or at night. Compatible with 6C control module (Area View or High-Resolution Rearview Camera), with software version 0607 or higher. Warning! There are 2 lines of coding to do here. Proceed : 1 &#8211; Engine&#46;&#46;&#46;</p>
<p>L’article <a href="https://www.vag-coding.net/vw/passat-b8/passat-b8-turn-on-the-area-view-360-lighting/">Passat (B8) &#8211; Turn on the Area View 360 lighting</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></description>
										<content:encoded><![CDATA[
<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="601" height="450" src="https://www.vag-coding.fr/wp-content/uploads/2022/12/vw_passat_3g.png" alt="" class="wp-image-3589" srcset="https://www.vag-coding.net/wp-content/uploads/2022/12/vw_passat_3g.png 601w, https://www.vag-coding.net/wp-content/uploads/2022/12/vw_passat_3g-300x225.png 300w" sizes="auto, (max-width: 601px) 100vw, 601px" /></figure>

<p class="wp-block-paragraph"><strong>Purpose:</strong> Enables the proximity lights under the side mirrors during maneuvers with Area View 360, when light conditions are poor or at night. Compatible with 6C control module (Area View or High-Resolution Rearview Camera), with software version 0607 or higher.   <br/><br/><br/><strong>Warning! There are 2 lines of coding to do here. </strong> <br/><br/><strong>Proceed :</strong> <br/><strong>1</strong> &#8211; Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle&#8217;s diagnostics socket.<br/><br/><strong>2</strong> &#8211; Switch on the ignition and run the VCDS program.</p>

<p class="wp-block-paragraph"><br/><br/><strong>Line 1:</strong><br/><br/><strong>3</strong> &#8211; Click on<strong>“Select</strong>”, then click on<strong>“09 &#8211; Cent. Elect.</strong>”.<br/><br/><strong>4</strong> &#8211; Click on<strong>“Security Access &#8211; 16</strong>” then enter the code<strong>“31347</strong>”.<br/><br/><strong>5</strong> &#8211; Click on<strong>“Adaptation &#8211; 10</strong>”.<br/><br/><strong>6</strong> &#8211; At the very top of this page, there is a drop-down menu.<br/>From this drop-down menu, select <strong>“Aussenlicht_uebergreifend – Umfeldleuchte als Manoevrierleuchte.”</strong></p>

<p class="wp-block-paragraph"><strong>7</strong> &#8211; On this same page there is a second drop-down menu, but towards the bottom<br/> of the page.<br/> On the latter, select &#8221; <strong>Active</strong> <em>&#8220;</em> and then confirm.</p>

<p class="wp-block-paragraph"><br/><br/><strong>Line 2:</strong><br/><br/><strong>3</strong> &#8211; Click &#8220;<strong>Select</strong>,&#8221; then click &#8220;<strong>6C &#8211; Rear View Camera / Area View</strong>.&#8221;<br/><br/><strong>4</strong> &#8211; Click on<strong>&#8220;Coding &#8211; 07</strong>&#8221; then click on<strong>&#8220;Long Coding Helper</strong>&#8220;.<br/><br/><strong>5</strong> &#8211; Select byte &#8220;<strong>08</strong>&#8220;<br/>. Then check bit &#8220;<strong>2</strong>&#8220;: &#8220;<strong>Manoeuve Light</strong>&#8220;</p>

<p class="wp-block-paragraph"></p>
<div class="wp-block-image">
<figure class="aligncenter size-full"><img loading="lazy" decoding="async" width="711" height="431" src="https://www.vag-coding.fr/wp-content/uploads/2026/10/areaviewlight.jpg" alt="" class="wp-image-57699" srcset="https://www.vag-coding.net/wp-content/uploads/2026/10/areaviewlight.jpg 711w, https://www.vag-coding.net/wp-content/uploads/2026/10/areaviewlight-300x182.jpg 300w, https://www.vag-coding.net/wp-content/uploads/2026/10/areaviewlight-600x364.jpg 600w" sizes="auto, (max-width: 711px) 100vw, 711px" /></figure>
</div><button class="simplefavorite-button has-count preset" data-postid="57717" data-siteid="1" data-groupid="1" data-favoritecount="0" style="background-color:#4c9fe8;color:#000000;"><i class="sf-icon-love" style=""></i>Love<span class="simplefavorite-button-count" style="">0</span></button><p>L’article <a href="https://www.vag-coding.net/vw/passat-b8/passat-b8-turn-on-the-area-view-360-lighting/">Passat (B8) &#8211; Turn on the Area View 360 lighting</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></content:encoded>
					
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">57717</post-id>	</item>
		<item>
		<title>Arona (KJ) &#8211; Activate Rearview Camera (Retrofit)</title>
		<link>https://www.vag-coding.net/seat-cupra/arona-kj/arona-kj-activate-rearview-camera-retrofit/</link>
		
		<dc:creator><![CDATA[T0MS]]></dc:creator>
		<pubDate>Wed, 07 Oct 2026 17:14:07 +0000</pubDate>
				<category><![CDATA[Arona (KJ)]]></category>
		<category><![CDATA[Camera]]></category>
		<category><![CDATA[MIB Seat]]></category>
		<category><![CDATA[Retrofit]]></category>
		<guid isPermaLink="false">https://www.vag-coding.fr/seat-cupra/arona-kj/arona-kj-activate-rearview-camera-retrofit/</guid>

					<description><![CDATA[<p>Purpose: Enables the rearview camera after it has been installed (retrofit). Proceed : 1 &#8211; Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle&#8217;s diagnostics socket. 2 &#8211; Switch on the ignition and run the VCDS program. Line 1: 3 &#8211; Click on“Select”&#46;&#46;&#46;</p>
<p>L’article <a href="https://www.vag-coding.net/seat-cupra/arona-kj/arona-kj-activate-rearview-camera-retrofit/">Arona (KJ) &#8211; Activate Rearview Camera (Retrofit)</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></description>
										<content:encoded><![CDATA[
<figure class="wp-block-image size-large"><img loading="lazy" decoding="async" width="1024" height="536" src="https://www.vag-coding.fr/wp-content/uploads/2022/12/SEAT-ARONA-KJ-1024x536.png" alt="VAG Coding VCDS ODBeleven Seat Arona KJ" class="wp-image-5068" srcset="https://www.vag-coding.net/wp-content/uploads/2022/12/SEAT-ARONA-KJ-1024x536.png 1024w, https://www.vag-coding.net/wp-content/uploads/2022/12/SEAT-ARONA-KJ-300x157.png 300w, https://www.vag-coding.net/wp-content/uploads/2022/12/SEAT-ARONA-KJ-768x402.png 768w, https://www.vag-coding.net/wp-content/uploads/2022/12/SEAT-ARONA-KJ-600x314.png 600w, https://www.vag-coding.net/wp-content/uploads/2022/12/SEAT-ARONA-KJ.png 1200w" sizes="auto, (max-width: 1024px) 100vw, 1024px" /></figure>

<p class="wp-block-paragraph"><strong>Purpose:</strong> Enables the rearview camera after it has been installed (retrofit).  <br/><br/><br/><strong>Proceed :</strong> <br/><strong>1</strong> &#8211; Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle&#8217;s diagnostics socket.<br/><br/><strong>2</strong> &#8211; Switch on the ignition and run the VCDS program.<br/><br/><strong>Line 1:</strong><br/><br/><strong>3</strong> &#8211; Click on<strong>“Select”</strong> then click on<strong>“5F &#8211; Electr. information</strong>”.<br/><br/><strong>4</strong> &#8211; Click on<strong>“Security Access &#8211; 16</strong>” then enter the code<strong>“20103</strong>”.<br/><br/><strong>5</strong> &#8211; Click on<strong>&#8220;Coding &#8211; 07</strong>&#8221; then click on<strong>&#8220;Long Coding Helper</strong>&#8220;.<br/><br/><strong>6</strong> &#8211; Select byte <strong>19</strong><br/>. Then set bit <strong>4</strong> to &#8220;Rear View Camera (RVC) Low installed (PR-KA1).&#8221;</p>

<figure class="wp-block-image size-large"><img loading="lazy" decoding="async" width="1024" height="483" src="https://www.vag-coding.fr/wp-content/uploads/2023/03/C25A41FA-66F7-4FC9-B7F4-1761395A1D01-1024x483.jpeg" alt="" class="wp-image-8929" srcset="https://www.vag-coding.net/wp-content/uploads/2023/03/C25A41FA-66F7-4FC9-B7F4-1761395A1D01-1024x483.jpeg 1024w, https://www.vag-coding.net/wp-content/uploads/2023/03/C25A41FA-66F7-4FC9-B7F4-1761395A1D01-300x141.jpeg 300w, https://www.vag-coding.net/wp-content/uploads/2023/03/C25A41FA-66F7-4FC9-B7F4-1761395A1D01-768x362.jpeg 768w, https://www.vag-coding.net/wp-content/uploads/2023/03/C25A41FA-66F7-4FC9-B7F4-1761395A1D01-600x283.jpeg 600w, https://www.vag-coding.net/wp-content/uploads/2023/03/C25A41FA-66F7-4FC9-B7F4-1761395A1D01.jpeg 1179w" sizes="auto, (max-width: 1024px) 100vw, 1024px" /></figure>

<p class="wp-block-paragraph"><strong>Line 2 (Optional, if parking assist is available)</strong> <strong>:</strong><br/><br/><strong>3</strong> &#8211; Click &#8220;<strong>Select</strong>,&#8221; then click &#8220;<strong>10 &#8211; Parking Assistance</strong>.&#8221;<br/><br/><strong>4</strong> &#8211; Click on<strong>&#8220;Coding &#8211; 07</strong>&#8221; then click on<strong>&#8220;Long Coding Helper</strong>&#8220;.<br/><br/><strong>5</strong> &#8211; Select byte <strong>02</strong><br/>. Then, for bits <strong>4-5</strong>, select<em> “10 Camera Type: Rear View Camera (RVC) installed.”</em></p>

<p class="wp-block-paragraph"></p>

<p class="wp-block-paragraph"><strong>Hardware upgrade :</strong></p>

<p class="wp-block-paragraph">The camera&#8217;s video cable is connected to the infotainment control unit. It is installed in the glovebox.   <br/><br/>The 2 pins of the reversing camera are used in the 12-pin quadlock (blue). Usable cable set: Part no. 000 979 009 E <br/><br/>Quadblock Assignment :<br/><br/>Pin 6 = video line<br/>Pin 12 = shielding</p>
<button class="simplefavorite-button has-count preset" data-postid="54764" data-siteid="1" data-groupid="1" data-favoritecount="0" style="background-color:#4c9fe8;color:#000000;"><i class="sf-icon-love" style=""></i>Love<span class="simplefavorite-button-count" style="">0</span></button><p>L’article <a href="https://www.vag-coding.net/seat-cupra/arona-kj/arona-kj-activate-rearview-camera-retrofit/">Arona (KJ) &#8211; Activate Rearview Camera (Retrofit)</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></content:encoded>
					
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">54764</post-id>	</item>
		<item>
		<title>Octavia 4 (NX) &#8211; Enable Rearview Camera (Retrofit)</title>
		<link>https://www.vag-coding.net/skoda/octavia-4-nx/octavia-4-nx-enable-rearview-camera-retrofit/</link>
		
		<dc:creator><![CDATA[T0MS]]></dc:creator>
		<pubDate>Sat, 08 Aug 2026 00:36:27 +0000</pubDate>
				<category><![CDATA[Octavia 4 (NX)]]></category>
		<category><![CDATA[Camera]]></category>
		<category><![CDATA[MIB Skoda]]></category>
		<category><![CDATA[Retrofit]]></category>
		<guid isPermaLink="false">https://www.vag-coding.fr/skoda/octavia-4-nx/octavia-4-nx-enable-rearview-camera-retrofit/</guid>

					<description><![CDATA[<p>Purpose: Enables the rearview camera after it has been installed on the MIB (retrofit). SFD: Yes Procedure: 1 &#8211; Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle&#8217;s diagnostics socket. 2 &#8211; Switch on the ignition and run the VCDS program or the&#46;&#46;&#46;</p>
<p>L’article <a href="https://www.vag-coding.net/skoda/octavia-4-nx/octavia-4-nx-enable-rearview-camera-retrofit/">Octavia 4 (NX) &#8211; Enable Rearview Camera (Retrofit)</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></description>
										<content:encoded><![CDATA[
<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="600" height="400" src="https://www.vag-coding.fr/wp-content/uploads/2024/01/skoda_octavia_4.png" alt="VAG Coding VCDS ODBeleven Skoda Octavia 4 NX" class="wp-image-16841" srcset="https://www.vag-coding.net/wp-content/uploads/2024/01/skoda_octavia_4.png 600w, https://www.vag-coding.net/wp-content/uploads/2024/01/skoda_octavia_4-300x200.png 300w" sizes="auto, (max-width: 600px) 100vw, 600px" /></figure>

<p class="wp-block-paragraph"><strong>Purpose:</strong> Enables the rearview camera after it has been installed on the MIB (retrofit). <br/><br/><br/>SFD: Yes<br/><br/><strong>Procedure:</strong> <br/><strong>1</strong> &#8211; Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle&#8217;s diagnostics socket.<br/><br/><strong></strong> 2 &#8211; Switch on the ignition and run the VCDS program or the OBDeleven app.  </p>

<p class="wp-block-paragraph"><strong>Hardware upgrade :</strong></p>

<p class="wp-block-paragraph">VW Retrofit Kit: 5H9 054 634</p>

<p class="wp-block-paragraph"></p>

<p class="wp-block-paragraph"><strong>Line 1:</strong><br/><br/><strong>3</strong> &#8211; Click &#8220;<strong>Select</strong>,&#8221; then click &#8220;<strong>19 &#8211; CAN Gateway</strong>.&#8221;<br/><br/><strong></strong> 4 &#8211; Click &#8220;<strong>Coding &#8211; 07</strong>,&#8221; then click &#8220;<strong>Long Coding Helper</strong>&#8220;<br/><br/><strong>5</strong> &#8211; Select the bit: PaCo_Video_Parksystem &#8211; RVC_compact_smart</p>

<p class="wp-block-paragraph"></p>

<p class="wp-block-paragraph"><strong>Line 2:</strong><br/><br/><strong>3</strong> &#8211; Click on<strong>“Select”</strong> then click on<strong>“5F &#8211; Electr. information</strong>”.<br/><br/><strong>4</strong> &#8211; Unlock <strong>SFD</strong> protection<br/><br/><strong>5</strong> &#8211; Click on<strong>“Adaptation &#8211; 10</strong>”.<br/><br/><strong>6</strong> &#8211; At the very top of this page, there is a drop-down menu.<br/>From this drop-down menu, select &#8220;<strong><strong>Car Function List BAP &#8211; VPS_0x0B</strong></strong>&#8220;<br/><br/><strong>7</strong> &#8211; On this same page, there is a second drop-down menu at the bottom<br/>of the page.<br/>On this menu, choose the<strong>“active</strong>” value.</p>

<p class="wp-block-paragraph"><strong>Line 3:</strong><br/><br/><strong>3</strong> &#8211; Click on<strong>“Select”</strong> then click on<strong>“5F &#8211; Electr. information</strong>”.<br/><br/><strong>4</strong> &#8211; Unlock <strong>SFD</strong> protection<br/><br/><strong>5</strong> &#8211; Click on<strong>“Adaptation &#8211; 10</strong>”.<br/><br/><strong>6</strong> &#8211; At the very top of this page, there is a drop-down menu.<br/>From this drop-down menu, select &#8220;<strong><strong><strong>Car Function List BAP &#8211; VPS_0x0B_msg_bus</strong></strong></strong>&#8220;<br/><br/><strong>7</strong> &#8211; On this same page, there is a second drop-down menu further down<br/>.<br/>From this menu, select the value &#8220;<strong><strong>can_fas</strong></strong>&#8220;</p>

<p class="wp-block-paragraph"><strong>Line 4:</strong><br/><br/><strong>3</strong> &#8211; Click on<strong>“Select”</strong> then click on<strong>“5F &#8211; Electr. information</strong>”.<br/><br/><strong>4</strong> &#8211; Unlock <strong>SFD</strong> protection<br/><br/><strong>5</strong> &#8211; Click on<strong>“Adaptation &#8211; 10</strong>”.<br/><br/><strong>6</strong> &#8211; At the very top of this page, there is a drop-down menu.<br/>From this drop-down menu, select &#8220;<strong><strong><strong>function_configuration_unit</strong></strong>&#8211; RVC_video_input</strong>&#8220;<br/><br/><strong>7</strong> &#8211; On this same page, there is a second drop-down menu further down<br/>.<br/>From this menu, select the value &#8220;<strong><strong>ethernet</strong></strong>&#8220;</p>

<p class="wp-block-paragraph"><strong>Line 5:</strong><br/><br/><strong>3</strong> &#8211; Click on<strong>“Select”</strong> then click on<strong>“5F &#8211; Electr. information</strong>”.<br/><br/><strong>4</strong> &#8211; Unlock <strong>SFD</strong> protection<br/><br/><strong>5</strong> &#8211; Click on<strong>“Adaptation &#8211; 10</strong>”.<br/><br/><strong>6</strong> &#8211; At the very top of this page, there is a drop-down menu.<br/>From this drop-down menu, select &#8220;<strong><strong><strong>parkingsystem_video_input</strong></strong>&#8211; carrier_resolution</strong>&#8220;<br/><br/><strong>7</strong> &#8211; On this same page, there is a second drop-down menu further down<br/>.<br/>From this menu, select the value &#8220;<strong><strong>1392&#215;656</strong></strong>&#8220;</p>

<p class="wp-block-paragraph"><strong>Line 6:</strong><br/><br/><strong>3</strong> &#8211; Click on<strong>“Select”</strong> then click on<strong>“5F &#8211; Electr. information</strong>”.<br/><br/><strong>4</strong> &#8211; Click on<strong>“Security Access &#8211; 16</strong>” then enter the code<strong>“20103</strong>”.<br/><br/><strong>5</strong> &#8211; Click on<strong>“Adaptation &#8211; 10</strong>”.<br/><br/><strong>6</strong> &#8211; At the very top of this page, there is a drop-down menu.<br/>From this drop-down menu, select &#8220;<strong>function_configuration_rvc &#8211; rvc_low_black_screen_trunk_open</strong>&#8220;<br/><br/><strong>7</strong> &#8211; On this same page, there is a second drop-down menu, but further down<br/>.<br/>From this menu, select the value &#8220;<strong><strong>not_active</strong></strong>&#8220;</p>

<p class="wp-block-paragraph"><strong>Line 7:</strong><br/><br/><strong>3</strong> &#8211; Click on<strong>“Select”</strong> then click on<strong>“5F &#8211; Electr. information</strong>”.<br/><br/><strong>4</strong> &#8211; Unlock <strong>SFD</strong> protection<br/><br/><strong>5</strong> &#8211; Click on<strong>“Adaptation &#8211; 10</strong>”.<br/><br/><strong>6</strong> &#8211; At the very top of this page, there is a drop-down menu.<br/>From this drop-down menu, select &#8220;<strong><strong><strong><strong>function_configuration_rvc</strong></strong></strong>&#8211; rvc_low_failsafe</strong>&#8220;<br/><br/><strong>7</strong> &#8211; On this same page, there is a second drop-down menu, but further down<br/>.<br/>From this menu, select the value &#8220;<strong><strong>not_active</strong></strong>&#8220;</p>

<p class="wp-block-paragraph"><strong>Line 8:</strong><br/><br/><strong>3</strong> &#8211; Click on<strong>“Select”</strong> then click on<strong>“5F &#8211; Electr. information</strong>”.<br/><br/><strong>4</strong> &#8211; Unlock <strong>SFD</strong> protection<br/><br/><strong>5</strong> &#8211; Click on<strong>“Adaptation &#8211; 10</strong>”.<br/><br/><strong>6</strong> &#8211; At the very top of this page, there is a drop-down menu.<br/>From this drop-down menu, select &#8220;<strong><strong><strong><strong>function_configuration_rvc</strong></strong></strong>&#8211; rvc_low_black_screen_velocity_threshold</strong>&#8220;<br/><br/><strong>7</strong> &#8211; On this same page, there is a second drop-down menu, but further down<br/>.<br/>From this menu, select the value &#8220;<strong><strong>not_active</strong></strong>&#8220;</p>

<p class="wp-block-paragraph"><strong>Line 9:</strong><br/><br/><strong>3</strong> &#8211; Click on<strong>“Select”</strong> then click on<strong>“5F &#8211; Electr. information</strong>”.<br/><br/><strong>4</strong> &#8211; Click on<strong>“Security Access &#8211; 16</strong>” then enter the code<strong>“20103</strong>”.<br/><br/><strong>5</strong> &#8211; Click on<strong>“Adaptation &#8211; 10</strong>”.<br/><br/><strong>6</strong> &#8211; At the very top of this page, there is a drop-down menu.<br/>From this drop-down menu, select &#8220;<strong><strong><strong><strong>function_configuration_rvc</strong></strong></strong>&#8211; rear_view_low_rvc</strong>&#8220;<br/><br/><strong>7</strong> &#8211; On this same page, there is a second drop-down menu, but further down<br/>.<br/>From this menu, select the value &#8220;<strong><strong>not_active</strong></strong>&#8220;</p>

<p class="wp-block-paragraph"><strong>Line 10:</strong><br/><br/><strong>3</strong> &#8211; Click on<strong>“Select”</strong> then click on<strong>“5F &#8211; Electr. information</strong>”.<br/><br/><strong>4</strong> &#8211; Unlock <strong>SFD</strong> protection<br/><br/><strong>5</strong> &#8211; Click on<strong>“Adaptation &#8211; 10</strong>”.<br/><br/><strong>6</strong> &#8211; At the very top of this page, there is a drop-down menu.<br/>From this drop-down menu, select &#8220;<strong><strong><strong><strong>function_configuration_rvc</strong></strong></strong>&#8211; rvc_low_lid_close_delay_time</strong>&#8220;<br/><br/><strong>7</strong> &#8211; On this same page, there is a second drop-down menu located toward the bottom<br/>.<br/>From this menu, select the value &#8220;<strong><strong>0 [ONE]_s</strong></strong>&#8220;</p>

<p class="wp-block-paragraph"><strong>Line 11:</strong><br/><br/><strong>3</strong> &#8211; Click on<strong>“Select”</strong> then click on<strong>“5F &#8211; Electr. information</strong>”.<br/><br/><strong>4</strong> &#8211; Unlock <strong>SFD</strong> protection<br/><br/><strong>5</strong> &#8211; Click on<strong>“Adaptation &#8211; 10</strong>”.<br/><br/><strong>6</strong> &#8211; At the very top of this page, there is a drop-down menu.<br/>From this drop-down menu, select &#8220;<strong><strong><strong><strong>function_configuration_rvc</strong></strong></strong>&#8211; rvc_low_videofailure_detection_time</strong>&#8220;<br/><br/><strong>7</strong> &#8211; On this same page, there is a second drop-down menu, but further down<br/>.<br/>From this menu, select the value &#8220;<strong><strong>0</strong></strong>&#8220;</p>
<button class="simplefavorite-button has-count preset" data-postid="51839" data-siteid="1" data-groupid="1" data-favoritecount="0" style="background-color:#4c9fe8;color:#000000;"><i class="sf-icon-love" style=""></i>Love<span class="simplefavorite-button-count" style="">0</span></button><p>L’article <a href="https://www.vag-coding.net/skoda/octavia-4-nx/octavia-4-nx-enable-rearview-camera-retrofit/">Octavia 4 (NX) &#8211; Enable Rearview Camera (Retrofit)</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></content:encoded>
					
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">51839</post-id>	</item>
	</channel>
</rss>
