Purpose: Enables Apple CarPlay Wireless and Google Android Auto Wireless to be activated without the need for a USB cable.

Vehicle must have an active USB wired CarPlay connection (from SW 1803, SFD: yes)

Warning! There are 8 lines of coding to do here.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket or OBDeleven.

2 – Switch on the ignition and run the VCDS program. or OBDeleven.

Line 1 (Wifi):


3 – Click on ” Select ” then click on “Select”.5F – Information Electr.” .

4 – Click on “Adaptation – 10”.

5 – Choose Channel : “function_configuration_connectivity – wifi_client_mode_5GHz”.

Set value to “ON

Line 2 (Wifi):


3 – Click on ” Select ” then click on “Select”.5F – Information Electr.” .

4 – Click on “Adaptation – 10”.

5 – Choose Channel : “function_configuration_connectivity – wifi_client_mode_2_GHz”.

Set value to “ON

Line 3 (Wifi):


3 – Click on ” Select ” then click on “Select”.5F – Information Electr.” .

4 – Click on “Adaptation – 10”.

5 – Select Channel : “function_configuration_connectivity – WIFI_Hotspot_5GHz”.

Set value to “ON

Line 4 (Wifi):


3 – Click on ” Select ” then click on “Select”.5F – Information Electr.” .

4 – Click on “Adaptation – 10”.

5 – Choose Channel : “function_configuration_connectivity – WIFI_Hotspot_2_4GHz”.

Set value to “ON

Line 5 (Apple Carplay wireless):


3 – Click on ” Select ” then click on “Select”.5F – Information Electr.” .

4 – Click on “Adaptation – 10”.

5 – Choose Channel : “function_configuration_connectivity – apple_car_play”.

Set value to “ON

Line 6 (Android Auto wireless):


3 – Click on ” Select ” then click on “Select”.5F – Information Electr.” .

4 – Click on “Adaptation – 10”.

5 – Choose Channel : “function_configuration_connectivity – google_android_auto”.

Set value to “ON

Line 7 (App Connect):


3 – Click on ” Select ” then click on “Select”.5F – Information Electr.” .

4 – Click on “Adaptation – 10”.

5 – Select Channel : “function_configuration_connectivity – app_connect_over_wifi”.

Set value to “ON

Line 8 (Option):


3 – Click on ” Select “, then click on “Select”.5F – Information Electr.” .

4 – Click on “Adaptation – 10”.

5 – Select Channel : “function_configuration_connectivity – wlan_module”.

Set value to “ON

Restart MIB3, reset MIB3 (hold down volume control for at least 10-15 seconds)

Don’t plug your Apple device into the USB port!

Make sure the WIFI access point is enabled in the MIB3 settings.
On your iPhone under Settings -> Wi-Fi, your car should appear with ***_5GHZ.
Pair your Apple device with Bluetooth, it should now ask if you want to enable CarPlay.
If not, delete the pairing, connect to the car’s Wi-Fi first from the Apple device, then try pairing again via Bluetooth.

L’article Octavia 4 (NX) – Wireless CarPlay activation est apparu en premier sur VAG Coding.

Purpose: Enables Apple CarPlay Wireless and Google Android Auto Wireless to be activated without the need for a USB cable.

Vehicle must have an active USB wired CarPlay connection (from SW 1803, SFD: yes)

Warning! There are 8 lines of coding to do here.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket or OBDeleven.

2 – Switch on the ignition and run the VCDS program. or OBDeleven.

Line 1 (Wifi):


3 – Click on ” Select ” then click on “Select”.5F – Information Electr.” .

4 – Click on “Adaptation – 10”.

5 – Choose Channel : “function_configuration_connectivity – wifi_client_mode_5GHz”.

Set value to “ON

Line 2 (Wifi):


3 – Click on ” Select ” then click on “Select”.5F – Information Electr.” .

4 – Click on “Adaptation – 10”.

5 – Choose Channel : “function_configuration_connectivity – wifi_client_mode_2_GHz”.

Set value to “ON

Line 3 (Wifi):


3 – Click on ” Select ” then click on “Select”.5F – Information Electr.” .

4 – Click on “Adaptation – 10”.

5 – Select Channel : “function_configuration_connectivity – WIFI_Hotspot_5GHz”.

Set value to “ON

Line 4 (Wifi):


3 – Click on ” Select ” then click on “Select”.5F – Information Electr.” .

4 – Click on “Adaptation – 10”.

5 – Choose Channel : “function_configuration_connectivity – WIFI_Hotspot_2_4GHz”.

Set value to “ON

Line 5 (Apple Carplay wireless):


3 – Click on ” Select ” then click on “Select”.5F – Information Electr.” .

4 – Click on “Adaptation – 10”.

5 – Choose Channel : “function_configuration_connectivity – apple_car_play”.

Set value to “ON

Line 6 (Android Auto wireless):


3 – Click on ” Select ” then click on “Select”.5F – Information Electr.” .

4 – Click on “Adaptation – 10”.

5 – Choose Channel : “function_configuration_connectivity – google_android_auto”.

Set value to “ON

Line 7 (App Connect):


3 – Click on ” Select ” then click on “Select”.5F – Information Electr.” .

4 – Click on “Adaptation – 10”.

5 – Select Channel : “function_configuration_connectivity – app_connect_over_wifi”.

Set value to “ON

Line 8 (Option):


3 – Click on ” Select “, then click on “Select”.5F – Information Electr.” .

4 – Click on “Adaptation – 10”.

5 – Select Channel : “function_configuration_connectivity – wlan_module”.

Set value to “ON

Restart MIB3, reset MIB3 (hold down volume control for at least 10-15 seconds)

Don’t plug your Apple device into the USB port!

Make sure the WIFI access point is enabled in the MIB3 settings.
On your iPhone under Settings -> Wi-Fi, your car should appear with ***_5GHZ.
Pair your Apple device with Bluetooth, it should now ask if you want to enable CarPlay.
If not, delete the pairing, connect to the car’s Wi-Fi first from the Apple device, then try pairing again via Bluetooth.

L’article Leon 4 (KL) – Wireless CarPlay activation est apparu en premier sur VAG Coding.

Purpose: Enables Apple CarPlay Wireless and Google Android Auto Wireless to be activated without the need for a USB cable.

Vehicle must have an active USB wired CarPlay connection (from SW 1803, SFD: yes)

Warning! There are 8 lines of coding to do here.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket or OBDeleven.

2 – Switch on the ignition and run the VCDS program. or OBDeleven.

Line 1 (Wifi):


3 – Click on ” Select ” then click on “Select”.5F – Information Electr.” .

4 – Click on “Adaptation – 10”.

5 – Choose Channel : “function_configuration_connectivity – wifi_client_mode_5GHz”.

Set value to “ON

Line 2 (Wifi):


3 – Click on ” Select ” then click on “Select”.5F – Information Electr.” .

4 – Click on “Adaptation – 10”.

5 – Choose Channel : “function_configuration_connectivity – wifi_client_mode_2_GHz”.

Set value to “ON

Line 3 (Wifi):


3 – Click on ” Select ” then click on “Select”.5F – Information Electr.” .

4 – Click on “Adaptation – 10”.

5 – Select Channel : “function_configuration_connectivity – WIFI_Hotspot_5GHz”.

Set value to “ON

Line 4 (Wifi):


3 – Click on ” Select ” then click on “Select”.5F – Information Electr.” .

4 – Click on “Adaptation – 10”.

5 – Choose Channel : “function_configuration_connectivity – WIFI_Hotspot_2_4GHz”.

Set value to “ON

Line 5 (Apple Carplay wireless):


3 – Click on ” Select ” then click on “Select”.5F – Information Electr.” .

4 – Click on “Adaptation – 10”.

5 – Choose Channel : “function_configuration_connectivity – apple_car_play”.

Set value to “ON

Line 6 (Android Auto wireless):


3 – Click on ” Select ” then click on “Select”.5F – Information Electr.” .

4 – Click on “Adaptation – 10”.

5 – Choose Channel : “function_configuration_connectivity – google_android_auto”.

Set value to “ON

Line 7 (App Connect):


3 – Click on ” Select ” then click on “Select”.5F – Information Electr.” .

4 – Click on “Adaptation – 10”.

5 – Select Channel : “function_configuration_connectivity – app_connect_over_wifi”.

Set value to “ON

Line 8 (Option):


3 – Click on ” Select “, then click on “Select”.5F – Information Electr.” .

4 – Click on “Adaptation – 10”.

5 – Select Channel : “function_configuration_connectivity – wlan_module”.

Set value to “ON

Restart MIB3, reset MIB3 (hold down volume control for at least 10-15 seconds)

Don’t plug your Apple device into the USB port!

Make sure the WIFI access point is enabled in the MIB3 settings.
On your iPhone under Settings -> Wi-Fi, your car should appear with ***_5GHZ.
Pair your Apple device with Bluetooth, it should now ask if you want to enable CarPlay.
If not, delete the pairing, connect to the car’s Wi-Fi first from the Apple device, then try pairing again via Bluetooth.

L’article Formentor (KM7) – Wireless CarPlay activation est apparu en premier sur VAG Coding.

Purpose: Allows you to disable / remove MirrorLink from Full Link on the MIB. The Mirrorlink service is no longer available since June 1, 2020 on Android natively. For direct connection to Android Auto.


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select” then click on“5F – Electr. information”.

4 – Click on“Security Access – 16” then enter the code“20103“.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Vehicle configuration-Mirror_link“.

7 – On the same page, you’ll find a second drop-down menu at the bottom
of the page.
On this menu, select“Disabled” and confirm.

L’article Toledo (NH) – Deactivate MirrorLink est apparu en premier sur VAG Coding.

Purpose: to unlock the limitations of Android Auto, allowing access to all functions without the restrictions imposed by default on the multimedia system.

SFD: yes

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostic socket or OBDeleven box.

2 – Switch on the ignition and run the VCDS program or the OBDeleven application.

Line 1:

3 – Click on“Select” then click on “.8125 – Application Server Infotainment“.

4 – Unlock SFD protection

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“nhtsa_properties – nhtsa limitation switches for androidauto no text input”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“not_activated” and confirm.

Line 2:

3 – Click on“Select” then click on “.8125 – Application Server Infotainment“.

4 – Unlock SFD protection

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“nhtsa_properties – nhtsa limitation switches for androidauto no voice input”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“not_activated” and confirm.

L’article Born (K11) – Unlock Android Auto limitations est apparu en premier sur VAG Coding.

Purpose: to unlock the limitations of Android Auto, allowing access to all functions without the restrictions imposed by default on the multimedia system.

SFD: yes

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostic socket or OBDeleven box.

2 – Switch on the ignition and run the VCDS program or the OBDeleven application.

Line 1:

3 – Click on“Select” then click on “.8125 – Application Server Infotainment“.

4 – Unlock SFD protection

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“nhtsa_properties – nhtsa limitation switches for androidauto no text input”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“not_activated” and confirm.

Line 2:

3 – Click on“Select” then click on “.8125 – Application Server Infotainment“.

4 – Unlock SFD protection

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“nhtsa_properties – nhtsa limitation switches for androidauto no voice input”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“not_activated” and confirm.

L’article Enyaq (NY) – Unlock Android Auto limitations est apparu en premier sur VAG Coding.

Purpose: to unlock the limitations of Android Auto, allowing access to all functions without the restrictions imposed by default on the multimedia system.

SFD: yes

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostic socket or OBDeleven box.

2 – Switch on the ignition and run the VCDS program or the OBDeleven application.

Line 1:

3 – Click on“Select” then click on “.8125 – Application Server Infotainment“.

4 – Unlock SFD protection

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“nhtsa_properties – nhtsa limitation switches for androidauto no text input”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“not_activated” and confirm.

Line 2:

3 – Click on“Select” then click on “.8125 – Application Server Infotainment“.

4 – Unlock SFD protection

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“nhtsa_properties – nhtsa limitation switches for androidauto no voice input”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“not_activated” and confirm.

L’article ID.4 (E2) – Unlock Android Auto limitations est apparu en premier sur VAG Coding.

Purpose: to unlock the limitations of Android Auto, allowing access to all functions without the restrictions imposed by default on the multimedia system.

SFD: yes

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostic socket or OBDeleven box.

2 – Switch on the ignition and run the VCDS program or the OBDeleven application.

Line 1:

3 – Click on“Select” then click on “.8125 – Application Server Infotainment“.

4 – Unlock SFD protection

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“nhtsa_properties – nhtsa limitation switches for androidauto no text input”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“not_activated” and confirm.

Line 2:

3 – Click on“Select” then click on “.8125 – Application Server Infotainment“.

4 – Unlock SFD protection

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“nhtsa_properties – nhtsa limitation switches for androidauto no voice input”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“not_activated” and confirm.

L’article ID.3 (E1) – Unlock Android Auto limitations est apparu en premier sur VAG Coding.

Purpose: Allows you to disable / remove MirrorLink from Full Link on the MIB. The Mirrorlink service is no longer available since June 1, 2020 on Android natively. For direct connection to Android Auto.


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select” then click on“5F – Electr. information”.

4 – Click on“Security Access – 16” then enter the code“20103“.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Vehicle configuration-Mirror_link“.

7 – On the same page, you’ll find a second drop-down menu at the bottom
of the page.
On this menu, select“Disabled” and confirm.

L’article Ibiza (6P) – Deactivate MirrorLink est apparu en premier sur VAG Coding.

Purpose: To deactivate / remove MirrorLink from SmartLink on the MIB. The Mirrorlink service is no longer available since June 1, 2020 on Android natively. For direct connection to Android Auto.


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select” then click on“5F – Electr. information”.

4 – Click on“Security Access – 16” then enter the code“20103“.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Vehicle configuration-Mirror_link“.

7 – On the same page, you’ll find a second drop-down menu at the bottom
of the page.
On this menu, select“Disabled” and confirm.

L’article Scala (NW) – Deactivate MirrorLink est apparu en premier sur VAG Coding.