Purpose: to activate the gear display on the on-board computer (for manual gearboxes).

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “17 – Instruments”.

4 – Click on ” 10 – Adaptation

5 – Select Channel 36 “Special Functions”
Add +1 to the existing value as specified in the tooltip (?xx).

Example: original value 011: change to 111

L’article R8 (42) – ODB speed ratio display est apparu en premier sur VAG Coding.

Purpose: to add the stopwatch to the ODB (on-board computer).

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “17 – Instruments”.

4 – Click on ” 10 – Adaptation

5 – Select Channel 36 “Special Functions”
Add +1 to the existing value as specified in the bubble (x?x).

Example: original value 001: change to 011

L’article R8 (42) – Lap Timer est apparu en premier sur VAG Coding.

Purpose: to disable spoiler operation. If you code the spoiler deployed or closed, it will be locked in the position after coding! Perfect for mounting a fixed tuning spoiler.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “46 – Central Conv” or “09 – Cent. Elect.”. 2 – Switch on the ignition and run the VCDS program.

4 – Click on“Coding – 07” then click on“Long Coding Helper”.

5 – Choose Byte 10:
Bit 3: Uncheck “Rear Spoiler Installed”.

L’article R8 (42) – Aileron deactivation est apparu en premier sur VAG Coding.

Purpose: to lower the spoiler after the doors have been closed centrally.

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select” then click on “46 – Central Conv” or “09 – Cent. Elect.” .

4 – Click on“Coding – 07” then click on“Long Coding Helper”.

5 – Choose Byte 13:
Bit 7: Uncheck “Rear Spoiler Comfort Lowering via Door Lock active” to deactivate.

L’article R8 (42) – Aileron lowering on locking est apparu en premier sur VAG Coding.

Purpose: to deactivate the windshield washer indicator on the ODB (on-board computer).

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “17 – Instruments”.

4 – Click on “Coding – 07 ”.

5 – Subtract 5 from the last coding digit (00xxxx?)

Example: 0000148 -> 0000143

L’article R8 (42) – Deactivate windshield washer indicator est apparu en premier sur VAG Coding.

OBDeleven OBD11 ONE-CLICK APPS coding and modification options for the Audi R8 (42)
–> Buy your OBDeleven device with VAG Custom

Audi R8 (42) (2007-2015)

• Oil service reset
• Rear spoiler control
• RNS-E start-up screen
• Daytime running lights
• Automatic locking/unlocking
• Emergency brake lights
• Inspection service reset
• Acoustic confirmation of locking/unlocking
• Microphone sensitivity
• Mirror lowering with reverse gear
• Rear spoiler on/off
• Seat belt warning
• Synchronized mirror adjustment
• Engine oil type
• Rear spoiler

Source: exhaustive list provided by OBDeleven for VAG Coding

L’article OBDeleven One-Click Apps R8 list (42) est apparu en premier sur VAG Coding.

Purpose : to display the speed limit on the RNS-E navigation screen.

ATTENTION: requires RNS-E version 193

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1 :

3 – Click on “Select”, then click on“37 – Navigation”.

4– Click on“Adaptation – 10”.

5 – Select Channel 17 (Speed Display) then set the value according to the desired display.

Set the value according to the desired display
0– no option (display disabled)
1– option on, off (speed display)
2– option on, off, 5km/h, 10km/h, 15km/h, 20km/h (speed display + overrun warning)

Don’t forget to restart the RNS-E, by pressing the power button for more than 40s.

L’article R8 (42) – RNS-E speed limit display est apparu en premier sur VAG Coding.

Purpose: to set automatic door unlocking when the ignition key is removed.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1 :

3 – Click on“Select”, then click on“46 – Comfort module”.

4 – Click on“Coding – 07” then on “Long Coding Helper”.

Byte 0:
Bit 1: Check “Auto-Unlock (unlocking after removing key from ignition)”.

L’article R8 (42) – Automatic door unlocking est apparu en premier sur VAG Coding.

Purpose: to set automatic door locking from 15km/h.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1 :

3 – Click on“Select”, then click on“46 – Comfort module”.

4 – Click on“Coding – 07” then on “Long Coding Helper”.

Byte 0:
Bit 2: Check “Auto-Lock (automatic locking from 15 km/h)”.

L’article R8 (42) – Automatic door locks est apparu en premier sur VAG Coding.

Purpose: Enables vehicle lock/unlock confirmation with beeps (alarm) and adds beep selection menu to ODB (MFA).

Procedure :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1 :

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Coding 07”.

5 – Select the “0” module and click on “Long Coding Helper”:

Byte 05 :
Bit 1: Check “Locking Confirmation via Horn active”.
Bit 2: Uncheck “Horn Confirmation Adaptation blocked (Adaptation Channel 010/011 & MFA+/FIS)”.
Bit 4: Check “Unlocking Confirmation via Horn active”.

L’article R8 (42) – Vehicle lock/unlock beeps est apparu en premier sur VAG Coding.