OBDeleven OBD11 ONE-CLICK APPS coding and modification options for Audi A2 (8Z)
–> Buy your OBDeleven with VAG Custom

Audi A2 8Z (2000-2005)

• Oil service reset
• Anti-theft alert system
• ATWS acoustic confirmation
• ATWS visual confirmation
• Automatic tailgate lock
• Automatic locking/unlocking
• Comfort windows
• Instrument cluster area
• Right/left-hand drive
• Seat belt warning
• Selective central locking

Source: exhaustive list provided by OBDeleven for VAG Coding

L’article OBDeleven One-Click Apps A2 (8Z) list est apparu en premier sur VAG Coding.

Purpose : to change the language of the ODB (On-Board Computer).

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “17 – Instruments”.

4 – Click on “Adaptation – 10”.

5 – Select Channel 04

Set the value according to the selected language

1 = German
2 = English
3 = French
4 = Italian
5 = Spanish
6 = Portuguese

L’article A2 (8Z) – Change ODB language est apparu en premier sur VAG Coding.

Purpose: Displays the Climatronic Hidden Menu.

Displaying instantaneous digital speed? it’s possible! No need to use your VCDS VAG-COM cable for this tutorial.

What’s it for?

In the hidden Audi Climatronic menu, you can easily access secret diagnostic readings such as battery voltage, car speed, engine rpm, sensor readings, system DTC codes and much more.

Audi Climatronic single-zone hidden menu procedure

1. Turn position button II and wait for the Audi Climatronic system to start.
2. Press both the air recirculation and windshield defrost buttons.
3. On the screen, you should see 1C.
4. Select the channel using the temperature buttons.
5. Press the air recirculation button to read the value of the selected channel.
6. Press one of the temperature buttons to return to selection.
7. Turn the key to 0 position to exit the hidden menu.

List of hidden menu channels

• 1 – CTD
• 2 – Indoor temperature sensor value, head (G 86)
• 3 – In-dash temperature sensor value (G 56)
• 4 – fresh air intake temperature sensor value (G 89)
• 5 – value of outside air temperature sensor (G 17), front
• 6 – outdoor air temperature sensor value
• 7 – Fresh air blower temperature sensor value (G 109)
• 8 – Potentiometer value for temperature-controlled flap motor (G 92)
• 9 – temperature control authority flap value
• 10 – specified value of temperature control ruse
• 11 – central potentiometer value for flap motor (G 112)
• 12 – specified value of center flap
• 13 – Potentiometer value for low-cost/arrow motor (G 114)
• 14 – specified value of Footwell/Defroster Flap
• 15 – Potentiometer value for air motor (G 113)
• 16 – specified airflow damper value
• 17 – speed (km/h)
• 18 – Air blower voltage (volts)
• 19 – specified fresh air blower voltage (volts)
• 20 – A/C compressor voltage (volts)
• 21 – Low-voltage event counter
• 22 – A/C high-pressure switch cycle status (F 118)
• 23 – A/C high-pressure switch cycles (F 118)
• 24 – switch cycles, no absolute fluctuation
• 25 – kick-Down Switch
• 26 – Cooler temperature warning light (ECT)
• 27 – Motor speed (RPM)
• 29 – A/C compressor speed (RPM)
• 30 – SW version
• 32 – Malfunction counter, temperature control flap
• 33 – Malfunction counter, central flap
• 34 – Malfunction counter, Footwell/Defroster Flap
• 35 – malfunction counter, airflow map
• 36 – cold stop, temperature regulator (G 92)
• 37 – hot stop, temperature regulator, temperature flap motor (G 92), maximum stop
• 38 – cold stop, motorized flap-type power unit (G 112)
• 39 – Hot stop, central potentiometer for flap motor (G 112)
• 40 – cold stop, Footwell motor/flap over potentiometer (G114)
• 41 – hot stop, foot/arrow flap motor potentiometer (G114)
• 42 – cold stop, air level Engine map (G 113)
• 43 – hot shutdown, air plane for air flow map motor (G 113)
• 44 – Vehicle operating cycle counter
• 45 – calculated indoor temperature
• 46 – outside temperature, filtered, for control
• 47 – outdoor temperature in degrees C
• 48 – outdoor temperature
• 49 – operating countermeasure for speed signal
• 50 – rest time (in minutes)
• 51 – motor Cooler Temperature
• 52 – Graphic channel 1 – A/C compressor stop conditions are identified by illuminated segments of the “88.8” display.
• 53 – Graphic channel 2 – The electrical outputs of the climate system are identified by illuminated segments of the “88.8” display.
• 54 – Control features
• 55 – outdoor temperature for SIF/DIS
• 56 – temperature in degrees C, from indoor temperature sensor, in hairdresser (G 86)
• 57 – temperature in degrees C, from interior temperature sensor in instrument panel (G 56)
• 58 – temperature in degrees C, from fresh air intake pipe temperature sensor (G 89)
• 59 – temperature in degrees C, from outside air (ambient) Temperature sensor (G 17), front
• 60 – temperature in degrees C, from room temperature sensor at fresh air blower (G 109)
• 61 – software version
• 86 – Control display

L’article A2 (8Z) – Show hidden menu Climatronic est apparu en premier sur VAG Coding.

Purpose: activates selective locking/unlocking of doors.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“46 – Comfort module”.

4 – Click on“Coding 07”.

5 – Add +4 to the existing coding :

L’article A2 (8Z) – Selective door locking/unlocking est apparu en premier sur VAG Coding.

Purpose: Allows you to set automatic door locking from 15km/h, and unlocking when the key is removed.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“46 – Comfort module”.

4 – Click on“Coding 07”.

5 – Add +32 to the existing coding :

L’article A2 (8Z) – Automatic door locks est apparu en premier sur VAG Coding.

Purpose: To suppress the audible alarm and the warning light on the speedometer when driving without a seatbelt.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition, then run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “17 – Instruments”. 1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

4 – Click on“Coding 07” .

5 –Subtract02 from the first two digits of the code (??xxx).

To delete the belt alarm, simply recode as follows: 03142 (05 – 02 = 03) (origin example 05142)

L’article A2 (8Z) – Delete belt alarm est apparu en premier sur VAG Coding.

Purpose: activates confirmation of vehicle locking/unlocking with turn signals.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“46 – Comfort module”.

4 – Click on“Coding 07”.

5 – Add +512 to the existing coding :

L’article A2 (8Z) – Door lock/unlock confirmation (turn signals) est apparu en premier sur VAG Coding.

Purpose: Enables vehicle lock/unlock confirmation with beeps.

the vehicle must be equipped with the original alarm.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“46 – Comfort module”.

4 – Click on“Coding 07”.

5 – Add +1024 to the existing coding :

L’article A2 (8Z) – Door lock/unlock confirmation (beep) est apparu en premier sur VAG Coding.

Purpose: Activates comfort closing confirmation. The indicators will light up (x1) when the windows and sunroof are fully closed.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“46 – Comfort module”.

4 – Click on“Coding 07”.

5 – Add +512 to the existing coding :

L’article A2 (8Z) – Comfort closing confirmation est apparu en premier sur VAG Coding.