Purpose: to activate US indicators.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select” then click on “09 – Cent. Elect.” .

4 – Click on “Coding 07”.

5 – Select the “0” module and click on “Long Coding Helper”:

Byte 7: Set value 32 in Dec box (value in % of intensity, origin: 0)

Decimal example in yellow on the image:
14 (corresponds to 20% variation of LEDs)
1E (corresponds to 30% variation of LEDs)
28 (corresponds to 40% variation of LEDs)

L’article Touran (1T) – Activate turn signals in US mode est apparu en premier sur VAG Coding.

Purpose: activates US nightlights with turn signals only in Sport driving mode.


Watch out! There are 10 (headlights) or 8 (taillights) lines of coding to do here. (Leon Phase 1 only)


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Turn signal US headlights :

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte 0 BLK VL B36-Lichtfunktion C 0”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
Select“Standlicht allgemein (Schlusslicht; Positionslicht; Begrenzungslicht)” and confirm. (Origin: inactive)

Line 2:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte1BLK VRB20-Lichtfunktion C 1”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
Select“Standlicht allgemein (Schlusslicht; Positionslicht; Begrenzungslicht)” and confirm. (Origin: inactive)

Line 3:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte 0 BLK VL B36-Lichtfunktion D 0”.

7 – On this same page, you’ll find a second drop-down menu, at the bottom
of the page.
On this menu, select“Ambientlicht 4” and confirm. (Origin: inactive)

Line 4:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte1BLK VRB20-Lichtfunktion D 1”.

7 – On this same page, there is a second drop-down menu, but at the bottom
of the page.
On this menu, select “Ambientlicht”.Ambientlicht 4“and confirm. (Origin: inactive)

Line 5:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte 0 BLK VL B36-Dimmwert CD 0”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, choose between“0” and“100” and confirm. (Light illumination between 0 and 100%) (Origin: 0)

Line 6:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte1BLK VRB20-Dimmwert CD 1”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, choose between“0” and“100” and confirm. (Light illumination between 0 and 100%) (Origin: 0)

Line 7:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte 0 BLK VL B36-Lichtfunktion E 0”.

7 – On this same page, there’s a second drop-down menu at the bottom
of the page.
On this, select“Blinken links Dunkelphase” and confirm. (Origin: inactive)

Line 8:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte1BLK VRB20-Lichtfunktion E 1”.

7 – On this same page, there’s a second drop-down menu, but towards the bottom
of the page.
On this, choose“Blinken rechts Dunkelphase” then validate. (Origin: inactive)

Line 9:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte 0 BLK VL B36-Dimming Direction EF 0”.

7 – On this same page, there’s a second drop-down menu at the bottom
of the page.
On this menu, select“minimize” and confirm. (Origin : maximize)

Line 10:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte1BLK VRB20-Dimming Direction EF 1”.

7 – On this same page, there’s a second drop-down menu at the bottom
of the page.
On this menu, select“minimize” and confirm. (Origin : maximize)

US turn signal tail lights :

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte 18 BLK – Lichtfunktion D 0”.

7 – On this same page, you’ll find a second drop-down menu, at the bottom
of the page.
On this menu, select“Ambientlicht 4” and confirm. (Origin: inactive)

Line 2:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte 19 BLK – Lichtfunktion D 1”.

7 – On this same page, there is a second drop-down menu, but at the bottom
of the page.
On this menu, select “Ambientlicht”.Ambientlicht 4“and confirm. (Origin: inactive)

Line 3:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte 18 BLK – Dimmwert CD 0”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, choose between“0” and“100” and confirm. (Light illumination between 0 and 100%, example: 30) (Origin : 0)

Line 4:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte 19 BLK -Dimmwert CD 1”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, choose between“0” and“100” and confirm. (Light illumination between 0 and 100%, example: 30) (Origin : 0)

Line 5:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte 18 BLK – Lichtfunktion E 0”.

7 – On this same page, there’s a second drop-down menu at the bottom
of the page.
On this, select“Blinken links Dunkelphase” and confirm. (Origin: inactive)

Line 6:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte 19 BLK – Lichtfunktion E 1”.

7 – On this same page, there’s a second drop-down menu, but towards the bottom
of the page.
On this, choose“Blinken rechts Dunkelphase” then validate. (Origin: inactive)

Line 7:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte 18 BLK – Dimming Direction EF 0”.

7 – On this same page, there’s a second drop-down menu at the bottom
of the page.
On this menu, select“minimize” and confirm. (Origin : maximize)

Line 8:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte 19 BLK – Dimming Direction EF 1”.

7 – On this same page, there’s a second drop-down menu at the bottom
of the page.
On this menu, select“minimize” and confirm. (Origin : maximize)

L’article Leon (5F) – US turn signal in Sport mode est apparu en premier sur VAG Coding.

Purpose: to activate US indicators.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select” then click on “09 – Cent. Elect.” .

4 – Click on “Coding 07”.

5 – Select the “0” module and click on “Long Coding Helper”:

Byte 7: Enter value 32 in Dec box
(value in % of intensity, origin: 0)

Decimal example in yellow on the image:
14 (corresponds to 20% variation of LEDs)
1E (corresponds to 30% variation of LEDs)
28 (corresponds to 40% variation of LEDs)

L’article Eos (1F) – Activate turn signals in US mode est apparu en premier sur VAG Coding.

Purpose: activates US rear turn signals (red LED position light flashes instead of orange).

Watch out! There are 28 lines of coding to do here. Save your original coding. (Leon Phase 1 only)

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to
the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Leuchte23SL HLC10-Lichtfunktion E 23”.

7 – On this same page, there is a second drop-down menu, but at the bottom
of the page.
On this menu, choose “Blinken links Hellphase”.Blinken links Hellphase“then confirm.

Line 2:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on “Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Leuchte23SL HLC10-Dimmwert EF 23”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
Set the value to“100” and confirm.

Line 3:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Leuchte23SL HLC10-Dimming Direction EF 23”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, choose “maximize” and confirm.

Line 4:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Leuchte23SL HLC10-Lichtfunktion G 23”.

7 – On this same page, there is a second drop-down menu, but towards the bottom
of the page.
On this menu, choose “Blinken links Dunkelphase” and confirm.

Line 5:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Leuchte23SL HLC10-Dimmwert GH 23”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
Set the value to“0” and confirm.

Line 6:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Leuchte23SL HLC10-Dimming Direction GH 23”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, choose “minimize” then validate.

Line 7:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Leuchte24SL HRA65-Lichtfunktion E 24”.

7 – On this same page, there is a second drop-down menu, but towards the bottom
of the page.
On this menu, choose “Blinken rechts Hellphase”.Blinken rechts Hellphase“then confirm.

Line 8:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Leuchte24SL HRA65-Dimmwert EF 24”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
Set the value to“100” and confirm.

Line 9:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Leuchte24SL HRA65-Dimming Direction EF 24”.

7 – On this same page, there is a second drop-down menu, but at the bottom
of the page.
On this menu, select“maximize” and confirm.

Line 10:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Leuchte24SL HRA65-Lichtfunktion G 24”.

7 – On this same page, there is a second drop-down menu, but towards the bottom
of the page.
On this menu, choose “Blinken rechts Dunkelphase” and confirm.

Line 11:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Leuchte24SL HRA65-Dimmwert GH 24”.

7 – On the same page, you’ll find a second drop-down menu at the bottom
of the page.

Set the value to“0” and confirm.

Line 12:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Leuchte24SL HRA65-Dimming Direction GH 24”.

7 – On this same page, there is a second drop-down menu, but at the bottom
of the page.
On this menu, select“minimize” and confirm.

Line 13 :

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Leuchte26NSL LA72-Lichtfunktion E 26”.

7 – On this same page, there is a second drop-down menu, but at the bottom
of the page.
On this menu, choose “Blinken links Hellphase”.Blinken links Hellphase“then confirm.

Line 14:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Leuchte26NSL LA72-Dimmwert EF 26”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
Set the value to“100” and confirm.

Line 15 :

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Leuchte26NSL LA72-Dimming Direction EF 26”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, choose “maximize” and confirm.

Line 16:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Leuchte26NSL LA72-Lichtfunktion G 26”.

7 – On this same page, there is a second drop-down menu, but towards the bottom
of the page.
On this menu, choose “Blinken links Dunkelphase” and confirm.

Line 17:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Leuchte26NSL LA72-Dimmwert GH 26”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
Set the value to“0” and confirm.

Line 18:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Leuchte26NSL LA72-Dimming Direction GH 26”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, choose “minimize” then validate.

Line 19:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Leuchte27NSL RC6-Lichtfunktion E 27”.

7 – On this same page, there is a second drop-down menu, but towards the bottom
of the page.
On this menu, choose “Blinken rechts Hellphase”.Blinken rechts Hellphase“then confirm.

Line 20:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Leuchte27NSL RC6-Dimmwert EF 27”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
Set the value to“100” and confirm.

Line 21:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Leuchte27NSL RC6-Dimming Direction EF 27”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, choose “maximize” and confirm.

Line 22:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Leuchte27NSL RC6-Lichtfunktion G 27”.

7 – On this same page, there is a second drop-down menu, but towards the bottom
of the page.
On this menu, choose “Blinken rechts Dunkelphase” and confirm.

Line 23:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Leuchte27NSL RC6-Dimmwert GH 27”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
Set the value to“0” and confirm.

Line 24:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Leuchte27NSL RC6-Dimming Direction GH 27”.

7 – On this same page, there is a second drop-down menu, but at the bottom
of the page.
On this menu, select “minimize” and confirm.

Line 25:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Leuchte18BLK HLA60-Dimming Direction A 18”.

7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select “not active” and confirm.

Line 26:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Leuchte18BLK HLA60-Dimming Direction C 18”.

7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select “not active” and confirm.

Line 27:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Leuchte19BLK HRC31-Dimming Direction A 19”.

7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select “not active” and confirm.

Line 28:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Leuchte19BLK HRC31-Dimming Direction C 19”.

7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select “not active” and confirm.

L’article Leon (5F) – US rear turn signals est apparu en premier sur VAG Coding.

Purpose: to activate US nightlights with turn signals.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition, then run the VCDS program.

Line 1:

3 – Click on ” Select”, then click on ” Select ” and run the VCDS program.09 – Cent. Elect. ” .

4 – Click on “Coding – 07”.

5 – Select Byte 10 :

Bit 0: Check “ Turn signal active as Side marker”.

L’article A8 (D4) – US turn signal est apparu en premier sur VAG Coding.

Purpose: to activate US nightlights with turn signals.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition, then run the VCDS program.

Line 1:

3 – Click on ” Select”, then click on ” Select ” and run the VCDS program.09 – Cent. Elect. ” .

4 – Click on “Coding – 07”.

5 – Select Byte 10 :

Bit 0: Check “ Turn signal active as Side marker”.

L’article A7 (C7) – US flasher est apparu en premier sur VAG Coding.

Purpose: to activate US nightlights with turn signals, for xenon headlights only.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition, then run the VCDS program.

Line 1:

3 – Click on ” Select”, then click on ” Select ” and run the VCDS program.09 – Cent. Elect. ” .

4 – Click on “Coding – 07”.

5 – Select Byte 10 :

Bit 0: Check “ Turn signal active as Side marker”.

L’article A6 (C7) – US flasher est apparu en premier sur VAG Coding.

Purpose: to activate US indicators. (Passat B6 only)

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select” then click on “09 – Cent. Elect.” .

4 – Click on “Coding 07”.

5 – Select the “0” module and click on “Long Coding Helper”:

Byte 7: Set value 32 in Dec box (value in % of intensity, origin: 0)

Decimal example in yellow on the image:
14 (corresponds to 20% variation of LEDs)
1E (corresponds to 30% variation of LEDs)
28 (corresponds to 40% variation of LEDs)

L’article Passat (B6) – Activate turn signals in US mode est apparu en premier sur VAG Coding.

Purpose: Allows you to adjust the lighting power of the US indicators via the ambient lighting setting in the CAR menu. (save your original coding for a reset, does not work on all models)


Watch out! There are 26 lines of coding to do here.


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – Modify channels :

Channel “Interior light, luminaire configuration-Ambiente_Applikationszüge_in_Instrumententafel” Set value to “built in”
Channel “Interior light, luminaire configuration ambience menu with global off” Set value to “active”
Channel “Light 0 BLK VL B36 light function A 0” Set value to “Ambient light 1”

Channel “Light 0 BLK VL B36 dimming value AB 0” Set percentage value as required

Channel “Light 0 BLK VL B36 light function C 0” set value to “handbrake is applied”

Channel “light 0 BLK VL B36 light function D 0” set value to “interior light”

Channel “light 0 BLK VL B36 dimming value CD 0” set value to “0”

Channel “lamp 0 BLK VL B36-Dimming Direction CD 0” set value to “minimize”

Channel “lamp 0 BLK VL B36 light function F 0” set value to “flashing left light phase”

Channel “lamp 0 BLK VL B36 dimming value EF 0” set value to “100”.

Channel “Luminaire 0 BLK VL B36-Dimming Direction EF 0” Set value to “maximize”.

Channel “Luminaire 0 BLK VL B36-Light function H 0” Set value to “Flashing left dark phase”.

Channel “Luminaire 0 BLK VL B36 dimming value GH 0” set value to “0”.

Channel “lamp 0 BLK VL B36-Dimming Direction GH 0” set value to “minimize”

Channel “lamp1BLK VRB20 light function A 0” set value to “ambient light 1”

Channel “Lamp1BLK VRB20 dimming value AB 0” Set percentage value as desired

Channel “Lamp1BLK VRB20 light function C 0” Set value to “Handbrake is applied”

Channel “Lamp1BLK VRB20 light function D 0” Set value to “Interior light”

Channel “Luminaire1BLK VRB20 dimming value CD 0” set value to “0”.

Channel “luminaire1BLK VRB20-dimming direction CD 0” set value to “minimize”

Channel “luminaire1BLK VRB20 light function F 1” set value to “flashing right light phase”.

Channel “luminaire1BLK VRB20 dimming value EF 1” set value to “100”

Channel “luminaire1BLK VRB20-dimming direction EF 1” set value to “maximize”

Channel “luminaire1BLK VRB20 light function H 1” set value to “Flashing right dark phase”.

Channel “Luminaire1BLK VRB20 dimming value GH 1” Set value to “0”.

Channel “Luminaire1BLK VRB20-Dimming Direction GH 1” Set value to “minimize”.

If coding is unsuccessful, “Ambientelicht 3” and “Ambiente_Applikationsträger_in_Tuertafel” may have to be used.

L’article Golf 7 (5G) – US flashing light, adjustable via ambient lighting in CAR menu est apparu en premier sur VAG Coding.

Purpose: Allows changeover between normal daytime running lights and normal daytime running lights with US daytime running lights in light switch position “0”. For position and low-beam lights, you need to decide on a coding version. (save your original coding for a return to the original, does not work on all models)


Watch out! There are 27 lines of coding to be seen here, 29.


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – Modify channels :

Channel “daytime running light / daytime running light activation by BAP or operating sequence possible” set value to “active”.

Channel “light 0 BLK VL B36 light function A 0” set value to “active 100%”

Channel “light 0 BLK VL B36 -Dimming value AB 0” set value to “0”.

Channel “light 0 BLK VL B36 light function C 0” set value to “daytime running light”

Channel “light 0 BLK VL B36 dimming value CD 0” set percentage value as desired

Channel “Luminaire 0 BLK VL B36-Dimming Direction CD 0” Set value to “maximize”.

Channel “Luminaire 0 BLK VL B36 light function F 0” Set value to “Flashing left light phase”.

Channel “Luminaire 0 BLK VL B36 dimming value EF 0” set value to “100”.

Channel “Luminaire 0 BLK VL B36-Dimming Direction EF 0” Set value to “minimize”.

Channel “Luminaire 0 BLK VL B36 light function H 0” Set value to “Flashing left dark phase”.

Channel “Luminaire 0 BLK VL B36 -Dimming value GH 0” set value to “0”.

Channel “lamp 0 BLK VL B36-Dimming Direction GH 0” set value to “minimize”

Channel “lamp1BLK VRB20 light function A 1” set value to “active 100%”

Channel “lamp1BLK VRB20 dimming value AB 1” set value to “0”

Channel “lamp1BLK VRB20 light function C 1” set value to “daytime running light”

Channel “lamp1BLK VRB20 dimming value CD 1” set percentage value as desired

Channel “Luminaire1BLK VRB20-Dimming Direction CD 10” set value to “minimize”

Channel “luminaire1BLK VRB20 light function F 1” set value to “flashing right light phase”.

Channel “luminaire1BLK VRB20 dimming value EF 1” set value to “100”

Channel “Luminaire1BLK VRB20-Dimming Direction EF 1” Set value to “minimize”.

Channel “Luminaire1BLK VRB20 light function H 1” Set value to “Flashing right dark phase”.

Channel “Luminaire1BLK VRB20 dimming value GH 1” Value set to “0”

Channel “lamp1BLK VRB20-Dimming Direction GH 1” set value to “minimize”

Channel “lamp2SL VLB10 light function A 2” change value from “daytime running light” to “active 100%”

Channel “Light3SL VRB21 light function A 3” Change value from “Daytime running light” to “Active 100%”

Channel “Light4TFL LB4 light function A 4” Change value from “Daytime running light” to “Terminal 15 with overrun until vehicle comes to a standstill”

Channel “Light5 TFL RB32 light function A 5” Change value from “daytime running lights” to “Terminal 15 with overrun until vehicle comes to a standstill”

And if desired (then US lighting is on for position / low beam, otherwise always off)

Channel “Light 0 BLK VL B36 light function D 0” Set value to “General parking light (tail light; position light; parking light)”

Channel “Light1BLK VRB20 light function D 1” Set value to “General parking light (rear light; position light; parking light )”

L’article Golf 7 (5G) – US turn signal with daytime running lights (DRL) – can be changed in the CAR menu est apparu en premier sur VAG Coding.