Purpose : to close the electric tailgate using the button on the driver’s door.

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on ” Select”, then click on “Select”.6D – Elect. safe ” .

4 – Click on“Security Access – 16” then enter the code“12345“.

5 – Click on“Adaptation – 10”. Then select “Activation using rear lid remote unlocking switch-Tap function for closing” from the drop-down list.

Set value to “active

L’article Q3 (8U) – Electric tailgate lock with button est apparu en premier sur VAG Coding.

Purpose: to close the electric tailgate with the remote control.

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on ” Select”, then click on “Select”.6D – Elect. safe ” .

4 – Click on“Security Access – 16” then enter the code“12345“.

5 – Click on“Adaptation – 10”. Then select “Activation using rear lid opening button in remote key-Tap fonction for closing” from the drop-down list .

Set value to “active

L’article Q3 (8U) – Electric tailgate closure with remote control est apparu en premier sur VAG Coding.

Purpose: deactivates interior lighting when only the trunk is opened.


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347 “.

5 – Click on“Adaptation – 10 “.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Interior lighting Innenlicht-bei offenem Heckdeckel einschalten“.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“inactive” and confirm.

L’article Q2 (GA) – Interior lighting off when trunk is opened est apparu en premier sur VAG Coding.

Purpose: to deactivate beeps when opening/closing the trunk/electric liftgate.

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “Select”. 6D – Elect. Trunk” .

4 – Click on“Security Access – 16” then type in the code“12345”

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“ENG131232-MAS01911 – Ausstattungen aktivieren-Tongeber” /“activate equipment sound generator”.

7 – On this same page, there is a second drop-down menu, at the bottom
of the page.
On this menu, select“not active” and confirm.

L’article Q3 (F3) – Suppress electric tailgate beeps est apparu en premier sur VAG Coding.

Purpose: to deactivate beeps when opening/closing the trunk/electric liftgate. (Passat estate: SW/Variant/Kombi)

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “Select”. 6D – Elect. Trunk” .

4 – Click on“Security Access – 16” then type in the code“12345”

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“ENG131232-MAS01911 – Ausstattungen aktivieren-Tongeber” /“activate equipment sound generator”.

7 – On this same page, there is a second drop-down menu, at the bottom
of the page.
On this menu, select“not active” and confirm.

L’article Passat (B8) – Delete power tailgate beeps est apparu en premier sur VAG Coding.

Purpose: to keep the 3rd brake light on if the trunk is not fully closed. For security lighting at night or to make sure your safe is securely closed.


Warning! There are 2 lines of coding to do here.

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte22BR MA57-Lichtfunktion C 22”.

7 – On this same page, there’s a second drop-down menu at the bottom
of the page.
On this, select the value“Heckdeckel Offen” and confirm. (Origin: nicht aktiv)


Line 2:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte22BR MA57-Dimmwert CD 22”.

7 – On the same page, you’ll find a second drop-down menu at the bottom
of the page.
On this menu, choose a value between“0” and“100” depending on the power of the brake light, then confirm. (Origin: 0)

L’article Tarraco (KN) – Third brake light on when trunk is open est apparu en premier sur VAG Coding.

Purpose: to keep the 3rd brake light on if the trunk is not fully closed. For security lighting at night or to make sure your safe is securely closed.


Warning! There are 2 lines of coding to do here.

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte22BR MA57-Lichtfunktion C 22”.

7 – On this same page, there’s a second drop-down menu at the bottom
of the page.
On this, select the value“Heckdeckel Offen” and confirm. (Origin: nicht aktiv)


Line 2:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte22BR MA57-Dimmwert CD 22”.

7 – On the same page, you’ll find a second drop-down menu at the bottom
of the page.
On this menu, choose a value between“0” and“100” depending on the power of the brake light, then confirm. (Origin: 0)

L’article Q3 (F3) – Third brake light on if trunk is open est apparu en premier sur VAG Coding.

Purpose: turns on license plate illumination when trunk / tailgate is open.


Warning! There are 3 lines of coding to do here.

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Leuchte 25KZL HA59 – Lichtfunktion C 25”.

7 – On this same page, there’s a second drop-down menu at the bottom
of the page.
On this, choose the value“Heckdeckel Offen” and confirm. (origin : nicht aktiv)


Line 2:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Leuchte 25KZL HA59 – Dimmwert CD 25

7 – On this same page, there is a second drop-down menu, but at the bottom
of the page.
On this menu, select“100” and confirm. (origin : 0)

Line 3:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte25KZL HA59 – Dimming Direction CD 25”.

7 – On this same page, there is a second drop-down menu, but towards the bottom
of the page.
On the latter, choose“maximise” then validate.

L’article Arteon (3H) – Trunk-open license plate illumination est apparu en premier sur VAG Coding.

Purpose: turns on license plate illumination when trunk / tailgate is open.


Warning! There are 3 lines of coding to do here.

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Leuchte 25KZL HA59 – Lichtfunktion C 25”.

7 – On this same page, there’s a second drop-down menu at the bottom
of the page.
On this, choose the value“Heckdeckel Offen” and confirm. (origin : nicht aktiv)


Line 2:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Leuchte 25KZL HA59 – Dimmwert CD 25

7 – On this same page, there is a second drop-down menu, but at the bottom
of the page.
On this menu, select“100” and confirm. (origin : 0)

Line 3:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte25KZL HA59 – Dimming Direction CD 25”.

7 – On this same page, there is a second drop-down menu, but towards the bottom
of the page.
On the latter, choose“maximise” then validate.

L’article Touran (2T) – License plate illumination, open trunk est apparu en premier sur VAG Coding.

Purpose: turns on license plate illumination when trunk / tailgate is open.


Warning! There are 3 lines of coding to do here.

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Leuchte 25KZL HA59 – Lichtfunktion C 25”.

7 – On this same page, there’s a second drop-down menu at the bottom
of the page.
On this, choose the value“Heckdeckel Offen” and confirm. (origin : nicht aktiv)


Line 2:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Leuchte 25KZL HA59 – Dimmwert CD 25

7 – On this same page, there is a second drop-down menu, but at the bottom
of the page.
On this menu, select“100” and confirm. (origin : 0)

Line 3:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte25KZL HA59 – Dimming Direction CD 25”.

7 – On this same page, there is a second drop-down menu, but towards the bottom
of the page.
On the latter, choose“maximise” then validate.

L’article Karoq (NU) – License plate illumination, open trunk est apparu en premier sur VAG Coding.