Purpose: to set the number of flashes for the “Comfort flashing” option.


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Adaptation – 10”.

5 – Select“Comfort Turn Signal” from the drop-down list

Choose a value between 1 and 5 for the number of flashes

Note: If you have a Golf 6 after 2011, and the number of flashes has not changed after coding, you may need to activate the option in the MFA+ ODB.
In Options, go to Settings, then Lighting, Factory settings, then tick Factory settings and select OK.

L’article Eos (1F) Facelift – Comfort turn signal est apparu en premier sur VAG Coding.

Purpose: to set the number of flashes for the “Comfort flashing” option.


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Adaptation – 10”.

5 – Select“Comfort Turn Signal” from the drop-down list

Choose a value between 1 and 5 for the number of flashes

L’article Eos (1F) – Comfort flasher est apparu en premier sur VAG Coding.

Purpose: to set the number of flashes for the “Comfort flashing” option.


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Adaptation – 10”.

5 – Select“Comfort Turn Signal” from the drop-down list

Choose a value between 1 and 5 for the number of flashes

L’article Alhambra (7N) – Comfort flashing light est apparu en premier sur VAG Coding.

Purpose: to set the number of flashes for the “Comfort flashing” option.


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Adaptation – 10”.

5 – Select“Comfort Turn Signal” from the drop-down list

Choose a value between 1 and 5 for the number of flashes

L’article Sharan (7N) – Comfort blinker est apparu en premier sur VAG Coding.

Purpose: to set the number of flashes for the “Comfort flashing” option.


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Comfort Turn Signal”.

7 – Choose between“1” and“5” then validate.

L’article Octavia 2 (1Z) Facelift – Comfort turn signal est apparu en premier sur VAG Coding.

Purpose: to set the number of flashes for the “Comfort flashing” option.


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Comfort Turn Signal”.

7 – Choose between“1” and“5” then validate.

L’article Caddy (2K) Facelift – Comfort turn signal est apparu en premier sur VAG Coding.

Purpose: to set the number of flashes for the “Comfort flashing” option.


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Comfort Turn Signal”.

7 – Choose between“1” and“5” then validate.

L’article Transporter (T6) – Comfort turn signal est apparu en premier sur VAG Coding.

Purpose: to set the number of flashes for the “Comfort flashing” option.


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Turn signal control-Komfortblinken Blinkzyklen”.

7 – On this same page, there is a second drop-down menu at the bottom of the page.
On this menu, choose between“3” and“5” and confirm.

Information: If, after coding, the number of flashes has not changed, on your MIB screen Menu -> Settings -> Factory settings -> Lighting (Your interior lighting configurations will also be reset).

L’article Fabia 4 (PJ) – Comfort turn signal est apparu en premier sur VAG Coding.

Purpose: to set the number of flashes for the “Comfort flashing” option.


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Turn signal control-Komfortblinken Blinkzyklen”.

7 – On this same page, there is a second drop-down menu at the bottom of the page.
On this menu, choose between“3” and“5” and confirm.

Information: If, after coding, the number of flashes has not changed, on your MIB screen: CAR -> Settings -> Factory settings -> Lighting (Your interior lighting configurations will also be reset).

L’article Transporter (T6.1) – Comfort turn signal est apparu en premier sur VAG Coding.

Purpose: to set the number of flashes for the “Comfort flashing” option.


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Turn signal control-Komfortblinken Blinkzyklen”.

7 – On this same page, there is a second drop-down menu at the bottom of the page.
On this menu, choose between“3” and“5” and confirm.

Information: If, after coding, the number of flashes has not changed, on your MIB screen: CAR -> Settings -> Factory settings -> Lighting (Your interior lighting configurations will also be reset).

L’article Taigo (CS) – Comfort flashing light est apparu en premier sur VAG Coding.