Purpose : Allows you to change the Push-To-Talk (PTT) button on the bottom left of your multifunction steering wheel, to act as a mute button for sound volume.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “16 – Multifunction steering wheel”.

4 – Click on“Coding- 07”. then click on“Long Coding Helper”.

5 – Select Byte 1:
Bit 3: Uncheck “Multi-Function-Steering-Wheel (MFSW) with Push-To-Talk (PPT) Button installed”.

The Push-to-Talk (PPT) button now acts as a mute button.

L’article Transporter (T6) – Mute Push-To-Talk button est apparu en premier sur VAG Coding.

Purpose: Enables the USB port for iPhone CarPlay accounting (after activating App Connect and changing the USB and/or USB cable) for Discover MIB2 PQ (2015). (Retrofit)

For firmware references:
MST2_EU_VW_PQ_P02XXT

Modify the MIB2 coding and adaptation to recognize the new USB port (USB connector ref 5Q0 035 726 E) for both CarPlay and USB multimedia playback. A coding pin on the connector needs to be modified.

>- Activation App Connect CarPlay Android Auto

– > USB / AUX socket VW Golf 7 CarPlay Media MIB2 5Q0 035 726 E on VAG Custom


Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select” then click on“5F – Electr. information”.

4 – Click on“Coding- 07” then click on“Long Coding Helper“.

5 – Select byte“19“
Then check Bit“6-7” (C0 USB Configuration: USB and iPhone Functionality)

Ligne 2 (optional) :

3 – Click on“Select” then click on“5F – Electr. information”.

4 – Click on“Security Access – 16” then enter the code“20103”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Interface for external media activation – connection 1“

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, choose the value “activated“

L’article Transporter (T6) – Enable USB port for iPhone CarPlay (retrofit) est apparu en premier sur VAG Coding.

Purpose: to add Offroad mode to Discover PQ with navigation.


Warning! There are 3 lines of coding to do here.

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select” then click on“5F – Electr. information”.

4 – Click on“Security Access – 16” then enter the code“20103”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Car_Function_List_BAP_Gen2-compass_0x15”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“active” and confirm.

Line 2:

3 – Click on“Select” then click on“5F – Electr. information”.

4 – Click on“Security Access – 16” then enter the code“20103”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Car_Function_Adaptations_Gen2-menu_display_Compass”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“active” and confirm.

Line 3:

3 – Click on“Select” then click on“5F – Electr. information”.

4 – Click on“Security Access – 16” then enter the code“20103”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Car_Function_Adaptations_Gen2-menu_display_Compass_over-threshold_high”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“active” and confirm.

Restart the Discover Media PQ (hold down the ON/OFF button for at least 5 seconds).

Depending on your hardware and firmware, the off-road menu may appear directly in the Menu, or it may be hidden:
Press the VOICE-MENU-NAV buttons to access the secret menu, where you’ll now find the OFFROAD screen:

L’article Transporter (T6) – Activate Off-Road mode on Discover PQ est apparu en premier sur VAG Coding.

Purpose: To deactivate / remove MirrorLink from App-Connect on the Discover PQ MIB. The Mirrorlink service is no longer available since June 1, 2020 on Android natively. For direct connection to Android Auto.


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select” then click on“5F – Electr. information”.

4 – Click on“Security Access – 16” then enter the code“20103”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Vehicle configuration-Mirror_link”.

7 – On the same page, you’ll find a second drop-down menu at the bottom
of the page.
On this menu, select“Disabled” and confirm.

L’article Transporter (T6) – Deactivate MirrorLink est apparu en premier sur VAG Coding.

Purpose: Activates the green hidden menu (green menu, hidden menu, testmode, engineer mode) on Discover MIB2.

/!\ Caution: Making certain changes in the hidden menu may cause MIB2 to freeze or no longer start /!\


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select” then click on“5F – Electr. information”.

4 – Click on“Security Access – 16” then enter the code“S12345”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Developer mode”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, choose the value“activated”.

Restart MIB2, keep MENU button pressed until testmode menu appears

L’article Transporter (T6) – Activate the Discover hidden menu est apparu en premier sur VAG Coding.

Purpose: to disable the AM radio frequency on the Discover PQ (AM radio frequency is rarely used, unlike FM radio frequency).

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select” then click on“5F – Electr. information”.

4 – Click on “Coding – 07”.

5 – Click on “Long Coding Helper” .

6 – Select Byte 14

Set bit 1 “AM_disable

L’article Transporter (T6) – Disable AM frequency on Discover est apparu en premier sur VAG Coding.

OBDeleven OBD11 ONE-CLICK APPS coding and modification options for the Volkswagen Transporter (T6)
–> Buy your OBDeleven device with VAG Custom

VW T6 (2015-2019) / VW Transporter T6 / Multivan 7F / California / Kombi / Caravelle

• Air recirculation memory
• Driver’s seat heating memory
• Inspection service reset
• MirrorLink on the move
• Oil service reset
• Video in motion
• Automatic locking/unlocking
• Automatic closing in case of rain
• Brake pad wear indicator
• CH/LH lights
• CH/LH light variant
• Comfort turn signals
• Turn signal lights
• DRL activation/deactivation
• DRL function with flashing light
• DRL in MFD+
• Emergency brake lights
• Front wiper operating mode/position
• Fuel system priming
• LED license plate lamps
• Acoustic confirmation of locking/unlocking
• Scandinavian DRL
• Seat belt warning
• Selective central locking
• Steering wheel without CCS/ACC Retrofit
• Teardrop wipe
• Tire pressure warning
• Visual confirmation for comfort operation
• Motor fan test
• Engine oil type
• Motor preheating V1
• Motor preheating V2
• Unlocking the heater
• Inspection service distance
• Inspection service interval
• Multimedia Restart
• Multimedia security disclaimer
• Oil drain distance
• Oil change interval
• SAS calibration
• Warning of impending maintenance
• Disabling the start/stop system
• Tire pressure monitoring system

Source: exhaustive list provided by OBDeleven for VAG Coding

L’article List OBDeleven One-Click Apps TRANSPORTER (T6) est apparu en premier sur VAG Coding.

Purpose: Activating the cornering lights switches on the fog lamp on the side where the steering wheel is turned at speeds under 50 km/h. This function is also known as cornering. This function is also known as cornering. Once this function has been activated, the fog light on the side of the bend you’re turning into will come on! Super handy on narrow roads and roundabouts.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition then run the VCDS program.

Line 1:

3 – Click on“Select” then click on“09 – Cent. Elect.”. Switch on the ignition and run the VCDS program.

4 – Click on“Coding 07”.

5 – Select the “0” module and click on “Long Coding Helper”:

6 – In the window that appears, select

Byte 12:
Bit 4: Check “Cornering Light Activation Time limited”.

Byte 14 :
Bit 7: Check “Cornering Lights via Front Fog Lights active”.

7 – After this operation, click on the “Output” menu
Then validate “OK”.

L’article Transporter (T6) – Corner Lights activation est apparu en premier sur VAG Coding.

Purpose: to automatically switch on the lights when the vehicle is travelling at over 140 km/h.

(The lights will automatically go out if the vehicle is travelling at less than 60 km/h)

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Coding 07”.

5 – Select the “2 EPIRBs” module from the drop-down list and click on “Long coding wizard”:

Byte 0 Bit 0: Check “Highway Light Function active above (140kph/90mph)”.

L’article Transporter (T6) – Automatic headlamps from 140 km/h est apparu en premier sur VAG Coding.

Purpose: to automatically turn on the lights when it’s raining and the wipers have been triggered.

Procedure :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Coding 07”.

5 – Select the “2 EPIRBs” module from the drop-down list and click on “Long coding wizard”:

Byte 0 Bit 1: Check “Rain Light Function Active”.

L’article Transporter (T6) – Automatic headlight activation in the rain est apparu en premier sur VAG Coding.