Purpose : to deactivate the worn brake pad warning light on the ODB (on-board computer), e.g. if the brake pad has no sensor or if the sensor has a problem / Brake Pad Warning light desactivation.

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “17 – Instruments”.

4 – Click on “Coding – 07”.

The third and fourth coding digits (xx??x0x) are used to modify Instrument module options. To suppress the brake pad indicatorsubtract 1 from these digits.

For example, if the initial coding (with the wafer indicator) is:0007101

To delete the indicator plate, simply recode as follows:0006101(07 – 01 = 06)

L’article Touareg (7L) – Deactivate brake pad warning light est apparu en premier sur VAG Coding.

Purpose : to deactivate the windshield washer indicator on the ODB (on-board computer).

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “17 – Instruments”.

4 – Click on “Coding – 07”.

The third and fourth coding digits (xx??x0x) are used to modify Instrument module options. To suppress washer indicatorsubtract 4 from these digits.

For example, if the initial coding (with windshield washer indicator) is:0007101

To delete the windscreen washer indicator, simply recode as follows:0003101(07 – 04 = 03)

L’article Touareg (7L) – Deactivate windshield washer indicator est apparu en premier sur VAG Coding.

Purpose: to activate voice control on the RNS 510 (SDS).

ATTENTION: RNS 510 firmware must be version v2660.

Activating voice control brings up the “Voice control” menu in the RNS 510’s SETUP menu.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition, then run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “Select”, then click on “Select”. Procedure: 1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket. “37 – Navigation”.

4 – Click on“Coding 07”.

5 – Select the “0” module and click on “Long Coding Helper”:

Byte 3, check the box for“Bit 1: Microphone Diagnostics active”.

Byte 7, uncheck the box for“Bit 1: Voice Control inactive”.

To install the microphone, connect the microphone lead to the rear of the RNS 510. Connect to pins (Mic-)C1 and (Mic+)C7.

L’article Touareg (7L) – Activate RNS 510 voice command est apparu en premier sur VAG Coding.

OBDeleven OBD11 ONE-CLICK APPS coding and modification options for the Volkswagen Touareg (7L)
–> Buy your OBDeleven device with VAG Custom

VW Touareg 1 (7L) (2002-2010) / Coding for Touareg 7L Facelift only :

• Automatic door locking
• Automatic door unlocking
• Comfort turn signals
• Comfort windows
• Daytime running lights
• Emergency brake lights
• Unlocking the heater
• Oil service reset
• CD lock RNS 310/315
• RNS 310/315 developer menu
• Image OPS RNS 310/315
• RNS 310/315 SDS reversing camera
• Test mode
• Image OPS RNS 510
• SDS RNS 510
• Speed limit RNS 510
• RNS 510 theme
• Selective door unlocking
• Engine oil type

Source: exhaustive list provided by OBDeleven for VAG Coding

L’article OBDeleven One-Click Apps TOUAREG list (7L) est apparu en premier sur VAG Coding.

Purpose: to change the display theme of the RCD 510 and RNS 510.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select” then click on“37 – Navigation” for RNS510 and “56 – Radio” for RCD510.

4 – Click on“Coding 07” then “Long Coding Helper”.

5 – Select Byte 7

Bit 4-5: Select from 3 themes
“00 Display Variant: Highline
“10 Display Variant: Sportsline
“20 Display Variant: Premium

Exit the module and save your changes. The RCD / RNS 510 must now be restarted for the changes to take effect. Press both arrows and the star for 6s.

L’article Touareg (7L) – Change the RCD/RNS 510 theme est apparu en premier sur VAG Coding.

Purpose: Enables the display of OPS speed cameras on the car radio screen.

Please note: The vehicle must be equipped with a compatible car radio (RCD-310, RCD-510, RNS-315, RNS-510).

Procedure :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1 :

3 – Click on“Select”, then click on“10-Station assistance”.

4 – Click on“Security Access – 16” then enter the code“71679”.

5 – Click on“Coding- 07”. then click on“Long Coding Helper”.

6 – Select Byte 0:
Bit 4: Tick “Optical illustration active”.

L’article Touareg (7L) – OPS speed camera display on car radio screen est apparu en premier sur VAG Coding.

Purpose : To change the language of the ODB.

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “17 – Instruments”.

4 – Click on “Adaptation – 10”.

5 – Select Channel 04

Set the value according to the selected language

1 = German
2 = English
3 = French
4 = Italian
5 = Spanish
6 = Portuguese

L’article Touareg (7L) – Change ODB language est apparu en premier sur VAG Coding.

Purpose: locks/unlocks the RNS 510’s CD/DVD eject button.

Protection against theft of your navigation DVD.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition, then run the VCDS program.

Line 1:

3 – Click on ” Select”, then click on ” Select ” and run the VCDS program. 37 – Navigation” .

4 – Click on “Adaptation – 10”.

5 – Select Channel 43 (Ejection Lock) then set the value to 1 (CD/DVD Ejection Lock active)

Restart the RNS 510.

L’article Touareg (7L) – Lock CD/DVD eject button on RNS 510 est apparu en premier sur VAG Coding.

Purpose: Activates the hidden menu in RNS 510.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition, then run the VCDS program.

Line 1:

3 – Click on ” Select”, then click on ” Select ” and run the VCDS program.56 – Radio” .

4 – Click on “Adaptation – 10”.

5 – Choose Channel 50 then set the value to 1

Restart the RNS 510.

To launch the Hidden Menu, press SETUP (for 6s)

L’article Touareg (7L) – Activate hidden menu RNS 510 est apparu en premier sur VAG Coding.

Purpose: Adjusts the sensitivity of the light sensor.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Coding 07”.

5 – Select the “2 EPIRBs” module from the drop-down list and click on “Long coding wizard”:

Byte 2:
Bits 0-7 (187, 205 or 237 to increase sensitivity, or 45, 40 or 33 to decrease sensitivity)

L’article Touareg (7L) – Adjusting light sensor sensitivity est apparu en premier sur VAG Coding.