Purpose: to change the vehicle image of the OPS (parking aid) on the RCD 510/330/360/440 and RNS 315/510.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select” then click on“37 – Navigation” (RNS) or“56 – Radio” (RCD)

4 – Click on“Coding 07” then “Long Coding Helper”.

5 – Select Byte 6 or 9

Select the vehicle from the drop-down menu :

00 = via CAN
01 = Polo 6R
02 = New Beetle
03 = New Beetle Cabrio
04 = Scirocco
05 = Golf 5
06 = Jetta
07 = Golf 6 Variant
08 = Golf 6 Cabrio
09 = Touran
0A = Golf Plus
0C = Tiguan
0D = Sharan
0E = EOS
0F = Passat 3C
10 = Passat Limousine
11 = Passat Variant
13 = Caddy
14 = T5
2C = Skoda Octavia
2D = Skoda Octavia Kombi
2E = Skoda Superb Kombi

Exit the module and save your changes. The RCD or RNS must now be restarted for the changes to take effect. Press both arrows and the star for 6s.

L’article Polo 5 (6R) – Change the RCD/RNS OPS image est apparu en premier sur VAG Coding.

Purpose: to deactivate the windshield washer indicator on the ODB (on-board computer).

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “17 – Instruments”.

4 – Click on “Coding – 07” then click on “Long Coding Helper” .

5 – Select byte 1:
Then uncheck Bit 2: “Washer Fluid warning active/installed”.

L’article Polo 5 (6R) – Deactivate windshield washer indicator est apparu en premier sur VAG Coding.

Purpose: to deactivate the worn brake pad warning light on the ODB (on-board computer), e.g. if the brake pad has no sensor or if the sensor has a problem / Brake Pad Warning light desactivation.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “17 – Instruments”.

4 – Click on “Coding – 07” then click on “Long Coding Helper” .

5 – Select byte 1:
Then uncheck Bit 0: “Brakepad warning active/installed”.

L’article Polo 5 (6R) – Deactivate brake pad warning light est apparu en premier sur VAG Coding.

Purpose: to activate voice control on the RNS 510 (SDS).

ATTENTION: RNS 510 firmware must be version v2660.

Activating voice control brings up the “Voice control” menu in the RNS 510’s SETUP menu.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition, then run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “Select”, then click on “Select”. Procedure: 1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket. “37 – Navigation”.

4 – Click on“Coding 07”.

5 – Select the “0” module and click on “Long Coding Helper”:

Byte 3, check the box for“Bit 1: Microphone Diagnostics active”.

Byte 7, uncheck the box for“Bit 1: Voice Control inactive”.

To install the microphone, connect the microphone lead to the rear of the RNS 510. Connect to pins (Mic-)C1 and (Mic+)C7.

L’article Polo 5 (6R) – Activate RNS 510 voice control est apparu en premier sur VAG Coding.

OBDeleven OBD11 ONE-CLICK APPS coding and modification options for the Volkswagen Polo 5 (6R)
–> Buy your OBDeleven device with VAG Custom

VW Polo 5 (6R) (2009-2014) / Polo 5 GTI / R WRC

• Acoustic lock confirmation
• Automatic locking/unlocking
• Central locking with IGN
• Central locking settings
• Comfort flashing light
• Time to return home
• Emergency brake lights
• Gauge test/needle scan
• Headlamp washer
• Inspection service reset
• Departure time
• Oil service reset
• Parking light
• CD lock RNS 310/315
• RNS 310/315 developer menu
• Image OPS RNS 310/315
• RNS 310/315 reversing camera
• SDS RNS 310/315
• Test mode
• Image OPS RNS 510
• SDS RNS 510
• Speed limit RNS 510
• RNS 510 theme
• Seat belt warning
• Static bend lights
• Teardrop wipe
• Correction of consumption display
• Motor fan test
• Fuel system priming
• Hill-start assist settings
• Instrument cluster language
• LED license plate lamps
• Multifunction display
• Remote start Pop/box opening
• Scandinavian daytime running lights
• Selective central locking
• Disabling the Start/Stop system
• Management response
• XDS activation
• RNS315 Bluetooth activation
• ATWS country setting
• Automatic tailgate lock
• CH/LH light function
• CH/LH light variant
• Comfort windows
• Clutch message display
• Daytime running lights on/off
• Engine oil type
• Fog lamps with high beam
• Maintenance of front wipers
• Heated mirrors
• Unlocking the heater
• Tilt sensor sensitivity
• Turn signals with comfort windows
• Inspection service distance
• Inspection service interval
• Inside surveillance
• Sensitivity of interior surveillance
• Acoustic confirmation of locking/unlocking
• Acoustic confirmation of locking/unlocking V2
• Mirror heating with rear window
• Multimedia security disclaimer
• Oil change service distance
• Oil change service interval
• Telephone connection tone
• Rear wiper with reverse
• Visual confirmation

Source: exhaustive list provided by OBDeleven for VAG Coding

L’article OBDeleven One-Click Apps POLO 5 (6R) list est apparu en premier sur VAG Coding.

Purpose: locks/unlocks the RNS 510’s CD/DVD eject button.

Protection against theft of your navigation DVD.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition, then run the VCDS program.

Line 1:

3 – Click on ” Select”, then click on ” Select ” and run the VCDS program. 37 – Navigation” .

4 – Click on “Adaptation – 10”.

5 – Select Channel 43 (Ejection Lock) then set the value to 1 (CD/DVD Ejection Lock active)

Restart the RNS 510.

L’article Polo 5 (6R) – Lock the CD/DVD eject button on the RNS 510 est apparu en premier sur VAG Coding.

Purpose: to change the display theme of the RCD 510 and RNS 510.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select” then click on“37 – Navigation” for RNS510 and “56 – Radio” for RCD510.

4 – Click on“Coding 07” then “Long Coding Helper”.

5 – Select Byte 7

Bit 4-5: Select from 3 themes
“00 Display Variant: Highline
“10 Display Variant: Sportsline
“20 Display Variant: Premium

Exit the module and save your changes. The RCD / RNS 510 must now be restarted for the changes to take effect. Press both arrows and the star for 6s.

L’article Polo 5 (6R) – Change the RCD/RNS 510 theme est apparu en premier sur VAG Coding.

Purpose : to display the speed limit on the RNS 510 navigation screen.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select” then click on“37 – Navigation”.

4 – Click on“Coding 07”. Then “Long Coding Helper”.

5 – Select Byte 7
Activate Bit 2: Speed Threshold for Destination Input active

+ use voice command to activate Bit 3: Speed Threshold for Speech Destination Input active

L’article Polo 5 (6R) – Speed limit display RNS 510 est apparu en premier sur VAG Coding.

Purpose: Activates the hidden menu in RNS 510.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition, then run the VCDS program.

Line 1:

3 – Click on ” Select”, then click on ” Select ” and run the VCDS program.56 – Radio” .

4 – Click on “Adaptation – 10”.

5 – Choose Channel 50 then set the value to 1

Restart the RNS 510.

To launch the Hidden Menu, press SETUP (for 6s)

L’article Polo 5 (6R) – Activate hidden menu RNS 510 est apparu en premier sur VAG Coding.

Purpose: Enables the display of OPS speed cameras on the car radio screen.

Please note: The vehicle must be equipped with a compatible car radio (RCD-310, RCD-510, RNS-315, RNS-510).

Procedure :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1 :

3 – Click on“Select”, then click on“10-Station assistance”.

4 – Click on“Security Access – 16” then enter the code“71679”.

5 – Click on“Coding- 07”. then click on“Long Coding Helper”.

6 – Select Byte 0:
Bit 4: Tick “Optical illustration active”.

L’article Polo 5 (6R) – OPS speed camera display on car radio screen est apparu en premier sur VAG Coding.