Purpose: locks/unlocks the CD/DVD eject button.

Protection against CD theft.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition, then run the VCDS program.

Line 1:

3 – Click on ” Select”, then click on“5F – Information Electr.“. Procedure: 1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

4 – Click on ” Adaptation – 10 “.

5 – Select “Ejector lock / “Auswurfssperre / “CD Eject Button then set the value to Active for eject lock.

To eject the CD/DVD, set the value to Off for normal use of the button.

L’article Fabia (NJ) – Lock CD/DVD eject button est apparu en premier sur VAG Coding.

Purpose: Enables the USB port for iPhone CarPlay accounting (after activating SmartLink and changing the USB and/or USB cable) for MIB2s. (Retrofit)

For firmware references:
MST2_EU_SK_ZR_P02XXT

Modify the MIB2 coding and adaptation to recognize the new USB port (USB connector ref 5Q0 035 726 E) for both CarPlay and USB multimedia playback. A coding pin on the connector needs to be modified.

>- SmartLink CarPlay Android Auto activation

– > USB / AUX socket VW Golf 7 CarPlay Media MIB2 5Q0 035 726 E on VAG Custom


Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select” then click on“5F – Electr. information”.

4 – Click on“Coding- 07” then click on“Long Coding Helper“.

5 – Select byte“19“
Then check Bit“6-7” (C0 USB Configuration: USB and iPhone Functionality)

Line 2 (optional) :

3 – Click on“Select” then click on“5F – Electr. information”.

4 – Click on“Security Access – 16” then enter the code“20103”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Interface for external media activation – connection 1“

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, choose the value “activated“

L’article Fabia (NJ) – Enable USB port for iPhone CarPlay (retrofit) est apparu en premier sur VAG Coding.

Purpose: Displays the “Green Score Monitor” mode: “ECO MODE” graph on the MIB2 (Amundsen and Bolero).


Warning! There are 2 lines of coding to do here.

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select” then click on“5F – Electr. information”.

4 – Click on“Security Access – 16” then enter the code“20103”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Car_Function_Adaptations_Gen2-menu_display_user_eco_rating”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, choose the“active” value.

Line 2:

3 – Click on“Select” then click on“5F – Electr. information”.

4 – Click on“Security Access – 16” then enter the code“20103”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Car_Function_Adaptations_Gen2-menu_display_user_eco_rating_over_threshold_high”.

7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, choose the“active” value.

L’article Fabia (NJ) – Activate “Green Score Monitor” mode est apparu en premier sur VAG Coding.

Purpose: to correct the fuel consumption display on the on-board computer.

Note: these changes affect the display of instantaneous consumption, average consumption and fuel quantity.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition, then run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “17 – Instruments”. Procedure: 1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

4 – Click on“Adaptation- 10”.

5 – Select Channel: “Display correction of consumptions and operating range”.

Adjust consumption correction factor between 85% and 115%. (base value: 100)

Example 1: Calculation based on volume per distance (e.g. l/100 km): DIS: 9.3 l/100 km. Actual: 9.8 l/100 km. (100, 9,8 / 9,73 ? 105,38) Channel 3 will be changed from 100 to 105.
Example 2: Calculation based on volume distance (e.g. MPG is: DIS: 23 MPG. Actual: 24 MPG. (100, 23/24 and 95.83) Channel 3 will be changed from 100 to 96.

Example 3: the consumption announced by the ODB is 5.9l/100km, after checking it is actually 6.3l/100km.
Calculation of the rate to be entered: (6.3 * 100) / 5.9 = 106.78. The rate used will be 107%, and the consumption announced by the ODB will be a pessimistic 0.1l/100km.

Consumption is immediately modified on the MMI.

L’article Fabia (NJ) – Correction of ODB consumption display est apparu en premier sur VAG Coding.

Purpose: activates the brake/turn signal lights in flash mode during emergency braking.

Procedure :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Aussenlicht_Blinker – Emergency alert blinken”.

7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select“Active” and confirm.

OR

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Coding 07”.

5 – Select the “0” module and click on “Long Coding Helper”:

Byte 16:
Bit 1: Check “Emergency Brake Flashing via Brake Light active” (to activate brake lights)
Bit 2: Check “Emergency Brake Flashing via Turn Signal active” (to activate turn signals)

L’article Fabia (NJ) – Flash mode lights during emergency braking est apparu en premier sur VAG Coding.

Purpose: to display another logo when your Bolero car radio is launched.


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select” then click on“5F – Electr. information”.

4 – Click on“Security Access – 16” then enter the code“20103”.

5 – Click on“Coding – 07” then click on“Long Coding Helper”.

6 – Select byte“18”
Then modify the long coding value
List:

Logo Bit 0 Bit 1 Bit 2

Skoda (Default) disabled disabled disabled

RS enabled disabled disabled

L&K enabled enabled disabled

Monte Carlo enabled enabled enabled

Scout disabled enabled disabled

Greenline disabled disabled enabled

L’article Fabia (NJ) – Change Bolero start logo est apparu en premier sur VAG Coding.

Purpose: to set the electronic differential lock (XDS)

The electronic differential lock (XDS) is an extension of the well-known EDS function.
XDS does not react to wheel slip under acceleration, however, but allows the inside front wheel to be unloaded when cornering.
XDS puts pressure on the inside wheel during cornering from the hydraulic ESP to prevent wheel spin.


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select” then click on“03 – ABS brakes”.

4 – Click on“Security Access – 16” then enter the code“20103”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Expanded electronic differential lock”.

7 – On this same page, there is a second drop-down menu, but towards the bottom
of the page.
On this, choose the value according to your preference:
–“Standard” (default XDS)
–“Weak” (weak XDS)
–“Medium” (medium XDS)
–“Strong” (strong XDS)
then validate.

L’article Fabia (NJ) – Electronic differential lock (XDS) est apparu en premier sur VAG Coding.

Purpose: to set the mirror folding option via remote control when locking the vehicle.


The vehicle must be equipped with the “Electrically folding mirrors” option !



Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to
the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.


Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Access Control 2-Funk Spiegelanklappung Modus”.

7 – On this same page, there is a second drop-down menu, but at the bottom
of the page.
On this menu, choose the value you require and confirm.

• Default: “by convenience operation via remote control key” = long press on key button to fold outside mirrors.
• Alternative: “by look command via remote control key” = briefly press the key button to fold the outside mirrors.

L’article Fabia (NJ) – Mirror folding adjustment with remote control est apparu en premier sur VAG Coding.

Purpose: to adjust the hardness of the power steering for a softer steering wheel (Comfort) or a harder sporty one (Dynamic).
Warning: if you have the driving mode selection, do not modify!

Procedure :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program. Procedure: 1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

Line 1:

3 – Click on“Select”, then click on“44 – Steering Assistance”.

4 – Click on“Security Access – 16” then enter the code“19249”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Courbes caractéristiques d’assistance de direction” /“Characteristic curve of steering assistance”

7 – On this same page, there is a second drop-down menu but towards the bottom
of the page.
On this, choose the value:“Confort” or “Dynamic” then validate.

selection_by_charisma: You have the driving modes, do not modify this value otherwise you will lose the hardness of the steering wheel according to your driving mode!

L’article Fabia (NJ) – Modifying power steering hardness est apparu en premier sur VAG Coding.

Purpose: To deactivate / remove MirrorLink from SmartLink on the MIB. The Mirrorlink service is no longer available since June 1, 2020 on Android natively. For direct connection to Android Auto.


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select” then click on“5F – Electr. information”.

4 – Click on“Security Access – 16” then enter the code“20103“.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Vehicle configuration-Mirror_link“.

7 – On the same page, you’ll find a second drop-down menu at the bottom
of the page.
On this menu, select“Disabled” and confirm.

L’article Fabia (NJ) – Deactivate MirrorLink est apparu en premier sur VAG Coding.