<?xml version="1.0" encoding="UTF-8"?><rss version="2.0"
	xmlns:content="http://purl.org/rss/1.0/modules/content/"
	xmlns:wfw="http://wellformedweb.org/CommentAPI/"
	xmlns:dc="http://purl.org/dc/elements/1.1/"
	xmlns:atom="http://www.w3.org/2005/Atom"
	xmlns:sy="http://purl.org/rss/1.0/modules/syndication/"
	xmlns:slash="http://purl.org/rss/1.0/modules/slash/"
	>

<channel>
	<title>Liste Codages Options Cachées Audi - Q8 (4M) - VAG Coding</title>
	<atom:link href="https://www.vag-coding.net/category/audi/q8-4m/feed/" rel="self" type="application/rss+xml" />
	<link>https://www.vag-coding.net/category/audi/q8-4m/</link>
	<description>Codage Personnalisation et Activation d&#039;Options Cachées VCDS VAG-COM OBDeleven VCP Tuto Codes Défauts Sécurisé CarPlay VW AUDI SEAT SKODA</description>
	<lastBuildDate>Thu, 08 Oct 2026 05:58:05 +0000</lastBuildDate>
	<language>en-US</language>
	<sy:updatePeriod>
	hourly	</sy:updatePeriod>
	<sy:updateFrequency>
	1	</sy:updateFrequency>
	

<image>
	<url>https://www.vag-coding.net/wp-content/uploads/2022/12/cropped-cropped-990A929D-545E-4694-833C-F67C340B13FC-e1672418802812-150x150.jpeg</url>
	<title>Liste Codages Options Cachées Audi - Q8 (4M) - VAG Coding</title>
	<link>https://www.vag-coding.net/category/audi/q8-4m/</link>
	<width>32</width>
	<height>32</height>
</image> 
<site xmlns="com-wordpress:feed-additions:1">211573443</site>	<item>
		<title>Q8 (4M) &#8211; Disable automatic door unlocking with DSG in &#8220;P&#8221;</title>
		<link>https://www.vag-coding.net/audi/q8-4m/q8-4m-disable-automatic-door-unlocking-with-dsg-in-p/</link>
		
		<dc:creator><![CDATA[T0MS]]></dc:creator>
		<pubDate>Mon, 21 Sep 2026 06:40:18 +0000</pubDate>
				<category><![CDATA[Q8 (4M)]]></category>
		<category><![CDATA[Central Locking]]></category>
		<category><![CDATA[DSG]]></category>
		<guid isPermaLink="false">https://www.vag-coding.fr/audi/q8-4m/q8-4m-disable-automatic-door-unlocking-with-dsg-in-p/</guid>

					<description><![CDATA[<p>Purpose: Disables the feature that automatically unlocks all doors when the DSG automatic transmission is shifted to the &#8220;P&#8221; position. Procedure: 1 &#8211; Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle&#8217;s diagnostics socket. 2 &#8211; Switch on the ignition and run the&#46;&#46;&#46;</p>
<p>L’article <a href="https://www.vag-coding.net/audi/q8-4m/q8-4m-disable-automatic-door-unlocking-with-dsg-in-p/">Q8 (4M) &#8211; Disable automatic door unlocking with DSG in &#8220;P&#8221;</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></description>
										<content:encoded><![CDATA[
<figure class="wp-block-image size-full"><img fetchpriority="high" decoding="async" width="1200" height="600" src="https://www.vag-coding.fr/wp-content/uploads/2023/09/AUDI-Q8-4M.png" alt="VAG Coding VCDS ODBeleven Audi Q8 4M" class="wp-image-11172" srcset="https://www.vag-coding.net/wp-content/uploads/2023/09/AUDI-Q8-4M.png 1200w, https://www.vag-coding.net/wp-content/uploads/2023/09/AUDI-Q8-4M-300x150.png 300w, https://www.vag-coding.net/wp-content/uploads/2023/09/AUDI-Q8-4M-1024x512.png 1024w, https://www.vag-coding.net/wp-content/uploads/2023/09/AUDI-Q8-4M-768x384.png 768w, https://www.vag-coding.net/wp-content/uploads/2023/09/AUDI-Q8-4M-600x300.png 600w" sizes="(max-width: 1200px) 100vw, 1200px" /></figure>

<p class="wp-block-paragraph"><strong>Purpose:</strong> Disables the feature that automatically unlocks all doors when the DSG automatic transmission is shifted to the &#8220;P&#8221; position.</p>

<p class="wp-block-paragraph"><strong>Procedure: </strong><br/><strong>1 &#8211;</strong> Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle&#8217;s diagnostics socket.</p>

<p class="wp-block-paragraph"><strong>2 &#8211;</strong> Switch on the ignition and run the VCDS program.</p>

<p class="wp-block-paragraph"><strong>3 &#8211;</strong> Click on <strong>&#8220;Select&#8221;</strong> then click on <strong>&#8221; <strong>46 &#8211; Central Module Comfort System</strong> &#8220;</strong> .</p>

<p class="wp-block-paragraph"><strong>4</strong> &#8211; Click on “<strong>Coding &#8211; 07</strong>”.</p>

<p class="wp-block-paragraph"><strong>5</strong> &#8211; Click on “<strong>Long Coding Helper</strong>” .</p>

<p class="wp-block-paragraph"><strong>6</strong> &#8211; <span class="">Clear the bit </span> <span class=""><strong>&#8221; </strong></span><strong>automatic_unlock_nar&#8221;</strong> </p>
<button class="simplefavorite-button has-count preset" data-postid="53756" data-siteid="1" data-groupid="1" data-favoritecount="0" style="background-color:#4c9fe8;color:#000000;"><i class="sf-icon-love" style=""></i>Love<span class="simplefavorite-button-count" style="">0</span></button><p>L’article <a href="https://www.vag-coding.net/audi/q8-4m/q8-4m-disable-automatic-door-unlocking-with-dsg-in-p/">Q8 (4M) &#8211; Disable automatic door unlocking with DSG in &#8220;P&#8221;</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></content:encoded>
					
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">53756</post-id>	</item>
		<item>
		<title>Q8 (4M) &#8211; Enable MMI sound at startup</title>
		<link>https://www.vag-coding.net/audi/q8-4m/q8-4m-enable-mmi-sound-at-startup/</link>
		
		<dc:creator><![CDATA[T0MS]]></dc:creator>
		<pubDate>Mon, 21 Sep 2026 06:27:23 +0000</pubDate>
				<category><![CDATA[Q8 (4M)]]></category>
		<category><![CDATA[MMI Audi]]></category>
		<guid isPermaLink="false">https://www.vag-coding.fr/audi/q8-4m/q8-4m-enable-mmi-sound-at-startup/</guid>

					<description><![CDATA[<p>Purpose: Enables the startup sound (welcome sound), which plays when the MMI or the vehicle is turned on. Procedure: 1 &#8211; Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle&#8217;s diagnostics socket. 2 &#8211; Switch on the ignition and run the VCDS program.&#46;&#46;&#46;</p>
<p>L’article <a href="https://www.vag-coding.net/audi/q8-4m/q8-4m-enable-mmi-sound-at-startup/">Q8 (4M) &#8211; Enable MMI sound at startup</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></description>
										<content:encoded><![CDATA[
<figure class="wp-block-image size-large"><img decoding="async" width="1024" height="512" src="https://www.vag-coding.fr/wp-content/uploads/2023/09/AUDI-Q8-4M-1024x512.png" alt="VAG Coding VCDS ODBeleven Audi Q8 4M" class="wp-image-11172" srcset="https://www.vag-coding.net/wp-content/uploads/2023/09/AUDI-Q8-4M-1024x512.png 1024w, https://www.vag-coding.net/wp-content/uploads/2023/09/AUDI-Q8-4M-300x150.png 300w, https://www.vag-coding.net/wp-content/uploads/2023/09/AUDI-Q8-4M-768x384.png 768w, https://www.vag-coding.net/wp-content/uploads/2023/09/AUDI-Q8-4M-600x300.png 600w, https://www.vag-coding.net/wp-content/uploads/2023/09/AUDI-Q8-4M.png 1200w" sizes="(max-width: 1024px) 100vw, 1024px" /></figure>

<p class="wp-block-paragraph"><strong>Purpose:</strong> Enables the startup sound (welcome sound), which plays when the MMI or the vehicle is turned on.  </p>

<p class="wp-block-paragraph"><br/><strong>Procedure:</strong> <br/> 1 &#8211; Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle&#8217;s diagnostics socket.<br/><br/> 2 &#8211; Switch on the ignition and run the VCDS program.</p>

<p class="wp-block-paragraph"></p>

<p class="wp-block-paragraph"><strong>Line 1:</strong><br/><br/><strong>3</strong> &#8211; Click on<strong>“Select”</strong> then click on<strong>“5F &#8211; Electr. information</strong>”.<br/><br/><strong>4</strong> &#8211; Click &#8220;<strong>Adaptation &#8211; 10</strong>.&#8221;<br/><br/><strong>5</strong> &#8211; At the very top of this page, there is a drop-down menu.<br/>From this drop-down menu, select &#8220;<strong>Vehicle configuration &#8211; vehicle_readiness_sound</strong>&#8220;<br/><br/><strong>6</strong> &#8211; On this same page, there is a second drop-down menu toward the bottom<br/>of the page.<br/>From this menu, select &#8220;<strong>active</strong>&#8221; and then confirm.</p>
<button class="simplefavorite-button has-count preset" data-postid="53730" data-siteid="1" data-groupid="1" data-favoritecount="0" style="background-color:#4c9fe8;color:#000000;"><i class="sf-icon-love" style=""></i>Love<span class="simplefavorite-button-count" style="">0</span></button><p>L’article <a href="https://www.vag-coding.net/audi/q8-4m/q8-4m-enable-mmi-sound-at-startup/">Q8 (4M) &#8211; Enable MMI sound at startup</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></content:encoded>
					
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">53730</post-id>	</item>
		<item>
		<title>Q8 (4M) &#8211; Enable automatic window lowering</title>
		<link>https://www.vag-coding.net/audi/q8-4m/q8-4m-enable-automatic-window-lowering/</link>
		
		<dc:creator><![CDATA[T0MS]]></dc:creator>
		<pubDate>Sun, 02 Aug 2026 18:50:58 +0000</pubDate>
				<category><![CDATA[Q8 (4M)]]></category>
		<category><![CDATA[Central Locking]]></category>
		<guid isPermaLink="false">https://www.vag-coding.fr/audi/q8-4m/q8-4m-enable-automatic-window-lowering/</guid>

					<description><![CDATA[<p>Purpose: Allows the windows to be slightly ajar when the driver&#8217;s or passenger&#8217;s door is open. When a window is lowered, the cabin is no longer completely sealed, allowing the doors to be closed gently without having to slam them shut. (Windows Auto Drop) Warning! There are 2 lines of coding to do here. Proceed&#46;&#46;&#46;</p>
<p>L’article <a href="https://www.vag-coding.net/audi/q8-4m/q8-4m-enable-automatic-window-lowering/">Q8 (4M) &#8211; Enable automatic window lowering</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></description>
										<content:encoded><![CDATA[
<figure class="wp-block-image size-full"><img decoding="async" width="1200" height="600" src="https://www.vag-coding.fr/wp-content/uploads/2023/09/AUDI-Q8-4M.png" alt="VAG Coding VCDS ODBeleven Audi Q8 4M" class="wp-image-11172" srcset="https://www.vag-coding.net/wp-content/uploads/2023/09/AUDI-Q8-4M.png 1200w, https://www.vag-coding.net/wp-content/uploads/2023/09/AUDI-Q8-4M-300x150.png 300w, https://www.vag-coding.net/wp-content/uploads/2023/09/AUDI-Q8-4M-1024x512.png 1024w, https://www.vag-coding.net/wp-content/uploads/2023/09/AUDI-Q8-4M-768x384.png 768w, https://www.vag-coding.net/wp-content/uploads/2023/09/AUDI-Q8-4M-600x300.png 600w" sizes="(max-width: 1200px) 100vw, 1200px" /></figure>

<p class="wp-block-paragraph"><strong>Purpose:</strong> Allows the windows to be slightly ajar when the driver&#8217;s or passenger&#8217;s door is open. When a window is lowered, the cabin is no longer completely sealed, allowing the doors to be closed gently without having to slam them shut. (Windows Auto Drop)    <br/><br/><br/><strong>Warning! There are 2 lines of coding to do here. </strong> <br/><br/><strong>Proceed :</strong> <br/><strong>1</strong> &#8211; Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle&#8217;s diagnostics socket.<br/><br/><strong>2</strong> &#8211; Switch on the ignition and run the VCDS program.<br/><br/><strong>Line 1:</strong><br/><br/><strong>3</strong> &#8211; Click on<strong>&#8220;Select&#8221;</strong>, then click on<strong>&#8220;52 &#8211; Passenger door</strong>&#8220;.<br/><br/><strong>4</strong> &#8211; Click on<strong>&#8220;Coding &#8211; 07</strong>&#8221; then click on<strong>&#8220;Long Coding Helper</strong>&#8220;.<br/><br/><strong>5</strong> &#8211; Select byte &#8220;<strong>3</strong>&#8220;<br/>. Then uncheck bit &#8220;<strong>1</strong>&#8220;: &#8220;<strong>short_drop,active</strong>&#8220;<br/><br/><br/><strong>Line 2:</strong><br/><br/><strong>3</strong> &#8211; Click &#8220;<strong>Select</strong>,&#8221; then click &#8220;<strong>42 &#8211; Driver&#8217;s Door</strong>.&#8221;<br/><br/><strong>4</strong> &#8211; Click on<strong>&#8220;Coding &#8211; 07</strong>&#8221; then click on<strong>&#8220;Long Coding Helper</strong>&#8220;.<br/><br/><strong>5</strong> &#8211; Select byte &#8220;<strong>3</strong>&#8220;<br/>. Then uncheck bit &#8220;<strong>1</strong>&#8220;: &#8220;<strong>short_drop,active</strong>&#8220;</p>

<figure class="wp-block-image size-large"><img loading="lazy" decoding="async" width="1024" height="333" src="https://www.vag-coding.fr/wp-content/uploads/2026/08/Window_Auto_Drop_Audi-1024x333.jpg" alt="" class="wp-image-51660" srcset="https://www.vag-coding.net/wp-content/uploads/2026/08/Window_Auto_Drop_Audi-1024x333.jpg 1024w, https://www.vag-coding.net/wp-content/uploads/2026/08/Window_Auto_Drop_Audi-300x98.jpg 300w, https://www.vag-coding.net/wp-content/uploads/2026/08/Window_Auto_Drop_Audi-768x250.jpg 768w, https://www.vag-coding.net/wp-content/uploads/2026/08/Window_Auto_Drop_Audi-1536x500.jpg 1536w, https://www.vag-coding.net/wp-content/uploads/2026/08/Window_Auto_Drop_Audi-2048x667.jpg 2048w, https://www.vag-coding.net/wp-content/uploads/2026/08/Window_Auto_Drop_Audi-600x195.jpg 600w" sizes="auto, (max-width: 1024px) 100vw, 1024px" /></figure>
<button class="simplefavorite-button has-count preset" data-postid="51684" data-siteid="1" data-groupid="1" data-favoritecount="0" style="background-color:#4c9fe8;color:#000000;"><i class="sf-icon-love" style=""></i>Love<span class="simplefavorite-button-count" style="">0</span></button><p>L’article <a href="https://www.vag-coding.net/audi/q8-4m/q8-4m-enable-automatic-window-lowering/">Q8 (4M) &#8211; Enable automatic window lowering</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></content:encoded>
					
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">51684</post-id>	</item>
		<item>
		<title>Q8 (4M) &#8211; Enable the air recirculation memory function</title>
		<link>https://www.vag-coding.net/audi/q8-4m/q8-4m-enable-the-air-recirculation-memory-function/</link>
		
		<dc:creator><![CDATA[T0MS]]></dc:creator>
		<pubDate>Sun, 02 Aug 2026 18:25:48 +0000</pubDate>
				<category><![CDATA[Q8 (4M)]]></category>
		<category><![CDATA[Air conditioning]]></category>
		<guid isPermaLink="false">https://www.vag-coding.fr/audi/q8-4m/q8-4m-enable-the-air-recirculation-memory-function/</guid>

					<description><![CDATA[<p>Purpose: Enables the &#8220;recirculation&#8221; setting memory. If you have enabled it, it will remain active the next time the vehicle is started. Please note that your Audi has an automatic recirculation function via the MMI system; when this is enabled, the recirculation indicator light does not illuminate while the function is active. Proceed : 1&#46;&#46;&#46;</p>
<p>L’article <a href="https://www.vag-coding.net/audi/q8-4m/q8-4m-enable-the-air-recirculation-memory-function/">Q8 (4M) &#8211; Enable the air recirculation memory function</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></description>
										<content:encoded><![CDATA[
<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="1200" height="600" src="https://www.vag-coding.fr/wp-content/uploads/2023/09/AUDI-Q8-4M.png" alt="VAG Coding VCDS ODBeleven Audi Q8 4M" class="wp-image-11172" srcset="https://www.vag-coding.net/wp-content/uploads/2023/09/AUDI-Q8-4M.png 1200w, https://www.vag-coding.net/wp-content/uploads/2023/09/AUDI-Q8-4M-300x150.png 300w, https://www.vag-coding.net/wp-content/uploads/2023/09/AUDI-Q8-4M-1024x512.png 1024w, https://www.vag-coding.net/wp-content/uploads/2023/09/AUDI-Q8-4M-768x384.png 768w, https://www.vag-coding.net/wp-content/uploads/2023/09/AUDI-Q8-4M-600x300.png 600w" sizes="auto, (max-width: 1200px) 100vw, 1200px" /></figure>

<p class="wp-block-paragraph"><strong>Purpose:</strong> Enables the &#8220;recirculation&#8221; setting memory. If you have enabled it, it will remain active the next time the vehicle is started. Please note that your Audi has an automatic recirculation function via the MMI system; when this is enabled, the recirculation indicator light does not illuminate while the function is active.    </p>

<p class="wp-block-paragraph"> <br/><br/><br/><strong>Proceed :</strong> <br/><strong>1</strong> &#8211; Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle&#8217;s diagnostics socket.<br/><br/><strong>2</strong> &#8211; Switch on the ignition and run the VCDS program.<br/><br/><strong>Line 1:</strong><br/><br/><strong>3</strong> &#8211; Click on<strong>“Select</strong>” then click on<strong>“08 &#8211; Climatronic</strong>” /<strong>“08 &#8211; Auto HVAC</strong>”.<br/><br/><strong>4</strong> &#8211; Click on <strong>“Adaptation &#8211; 10”</strong>.<br/><br/><strong>5 &#8211;</strong> At the very top of this page, there is a drop-down menu.<br/>From this drop-down menu, select &#8220;<strong>IDE01476 &#8211; Store air recirculation setting with terminal 15 off</strong>&#8220;<br/><br/><strong>6</strong> &#8211; On this same page, there is a second drop-down menu located toward the bottom<br/>of the page.<br/>From this menu, select &#8220;<strong>Storing</strong>&#8221; or &#8220;<strong>Save</strong>,&#8221; then confirm.</p>

<figure class="wp-block-image size-large"><img loading="lazy" decoding="async" width="1024" height="364" src="https://www.vag-coding.fr/wp-content/uploads/2026/08/Air_Recirculation_Memory_audi-1024x364.jpg" alt="" class="wp-image-51634" srcset="https://www.vag-coding.net/wp-content/uploads/2026/08/Air_Recirculation_Memory_audi-1024x364.jpg 1024w, https://www.vag-coding.net/wp-content/uploads/2026/08/Air_Recirculation_Memory_audi-300x107.jpg 300w, https://www.vag-coding.net/wp-content/uploads/2026/08/Air_Recirculation_Memory_audi-768x273.jpg 768w, https://www.vag-coding.net/wp-content/uploads/2026/08/Air_Recirculation_Memory_audi-1536x546.jpg 1536w, https://www.vag-coding.net/wp-content/uploads/2026/08/Air_Recirculation_Memory_audi-2048x729.jpg 2048w, https://www.vag-coding.net/wp-content/uploads/2026/08/Air_Recirculation_Memory_audi-600x213.jpg 600w" sizes="auto, (max-width: 1024px) 100vw, 1024px" /></figure>
<button class="simplefavorite-button has-count preset" data-postid="51712" data-siteid="1" data-groupid="1" data-favoritecount="0" style="background-color:#4c9fe8;color:#000000;"><i class="sf-icon-love" style=""></i>Love<span class="simplefavorite-button-count" style="">0</span></button><p>L’article <a href="https://www.vag-coding.net/audi/q8-4m/q8-4m-enable-the-air-recirculation-memory-function/">Q8 (4M) &#8211; Enable the air recirculation memory function</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></content:encoded>
					
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">51712</post-id>	</item>
		<item>
		<title>Q8 (4M) &#8211; Display intermediate speeds in the Virtual Cockpit</title>
		<link>https://www.vag-coding.net/audi/q8-4m/q8-4m-display-intermediate-speeds-in-the-virtual-cockpit/</link>
		
		<dc:creator><![CDATA[T0MS]]></dc:creator>
		<pubDate>Sun, 02 Aug 2026 18:25:18 +0000</pubDate>
				<category><![CDATA[Q8 (4M)]]></category>
		<category><![CDATA[Virtual Cockpit]]></category>
		<guid isPermaLink="false">https://www.vag-coding.fr/audi/q8-4m/q8-4m-display-intermediate-speeds-in-the-virtual-cockpit/</guid>

					<description><![CDATA[<p>Purpose: Displays the intermediate km/h scale on the Virtual Cockpit speedometer. (Works only when the speedometer scale is set to km/h) Proceed :1 &#8211; Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle&#8217;s diagnostics socket. 2 &#8211; Switch on the ignition and run&#46;&#46;&#46;</p>
<p>L’article <a href="https://www.vag-coding.net/audi/q8-4m/q8-4m-display-intermediate-speeds-in-the-virtual-cockpit/">Q8 (4M) &#8211; Display intermediate speeds in the Virtual Cockpit</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></description>
										<content:encoded><![CDATA[
<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="1200" height="600" src="https://www.vag-coding.fr/wp-content/uploads/2023/09/AUDI-Q8-4M.png" alt="VAG Coding VCDS ODBeleven Audi Q8 4M" class="wp-image-11172" srcset="https://www.vag-coding.net/wp-content/uploads/2023/09/AUDI-Q8-4M.png 1200w, https://www.vag-coding.net/wp-content/uploads/2023/09/AUDI-Q8-4M-300x150.png 300w, https://www.vag-coding.net/wp-content/uploads/2023/09/AUDI-Q8-4M-1024x512.png 1024w, https://www.vag-coding.net/wp-content/uploads/2023/09/AUDI-Q8-4M-768x384.png 768w, https://www.vag-coding.net/wp-content/uploads/2023/09/AUDI-Q8-4M-600x300.png 600w" sizes="auto, (max-width: 1200px) 100vw, 1200px" /></figure>

<p class="wp-block-paragraph"><strong>Purpose:</strong> Displays the intermediate km/h scale on the Virtual Cockpit speedometer. (Works only when the speedometer scale is set to km/h)   <br/><br/><br/><strong>Proceed :</strong><br/><strong>1</strong> &#8211; Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle&#8217;s diagnostics socket.<br/><br/><strong>2</strong> &#8211; Switch on the ignition and run the VCDS program.<br/><br/><strong>Line 1:</strong><br/><br/><strong>3</strong> &#8211; Click on<strong>&#8220;Select&#8221;</strong>, then click on<strong>&#8220;17 &#8211; instruments</strong>&#8220;.<br/><br/><strong>4</strong> &#8211; Click on<strong>&#8220;Coding &#8211; 07</strong>&#8220;, then on<strong>&#8220;Long Coding Helper</strong>&#8220;.<br/><br/><strong>5</strong> &#8211; Select byte &#8220;<strong>18</strong>&#8220;<br/>. Then check bit &#8220;<strong>1</strong>&#8220;: &#8220;<strong>Tachometer_erweiterte_Skalenteilung</strong>&#8221;  </p>

<p class="wp-block-paragraph">OBDeleven: Tachometer_advanced_scale_division -&gt; yes</p>
<div class="wp-block-image">
<figure class="aligncenter size-full"><img loading="lazy" decoding="async" width="920" height="975" src="https://www.vag-coding.fr/wp-content/uploads/2026/08/Tachometer_erweiterte_Skalenteilung.png" alt="" class="wp-image-51600" srcset="https://www.vag-coding.net/wp-content/uploads/2026/08/Tachometer_erweiterte_Skalenteilung.png 920w, https://www.vag-coding.net/wp-content/uploads/2026/08/Tachometer_erweiterte_Skalenteilung-283x300.png 283w, https://www.vag-coding.net/wp-content/uploads/2026/08/Tachometer_erweiterte_Skalenteilung-768x814.png 768w, https://www.vag-coding.net/wp-content/uploads/2026/08/Tachometer_erweiterte_Skalenteilung-600x636.png 600w" sizes="auto, (max-width: 920px) 100vw, 920px" /></figure>
</div>
<p class="wp-block-paragraph"><br/></p>
<button class="simplefavorite-button has-count preset" data-postid="51704" data-siteid="1" data-groupid="1" data-favoritecount="0" style="background-color:#4c9fe8;color:#000000;"><i class="sf-icon-love" style=""></i>Love<span class="simplefavorite-button-count" style="">0</span></button><p>L’article <a href="https://www.vag-coding.net/audi/q8-4m/q8-4m-display-intermediate-speeds-in-the-virtual-cockpit/">Q8 (4M) &#8211; Display intermediate speeds in the Virtual Cockpit</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></content:encoded>
					
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">51704</post-id>	</item>
		<item>
		<title>Q8 (4M) &#8211; Reprogramming a new battery</title>
		<link>https://www.vag-coding.net/audi/q8-4m/q8-4m-reprogramming-a-new-battery/</link>
		
		<dc:creator><![CDATA[T0MS]]></dc:creator>
		<pubDate>Thu, 16 Jan 2025 20:19:05 +0000</pubDate>
				<category><![CDATA[Q8 (4M)]]></category>
		<category><![CDATA[Battery]]></category>
		<guid isPermaLink="false">https://www.vag-coding.fr/audi/q8-4m/q8-4m-reprogramming-a-new-battery/</guid>

					<description><![CDATA[<p>Purpose: Allows you to reprogram or recode all data for the new battery after it has been replaced. Watch out! There are 4 lines of coding to do here. Proceed : 1 &#8211; Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle&#8217;s diagnostics&#46;&#46;&#46;</p>
<p>L’article <a href="https://www.vag-coding.net/audi/q8-4m/q8-4m-reprogramming-a-new-battery/">Q8 (4M) &#8211; Reprogramming a new battery</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></description>
										<content:encoded><![CDATA[
<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="1200" height="600" src="https://www.vag-coding.fr/wp-content/uploads/2023/09/AUDI-Q8-4M.png" alt="VAG Coding VCDS ODBeleven Audi Q8 4M" class="wp-image-11172" srcset="https://www.vag-coding.net/wp-content/uploads/2023/09/AUDI-Q8-4M.png 1200w, https://www.vag-coding.net/wp-content/uploads/2023/09/AUDI-Q8-4M-300x150.png 300w, https://www.vag-coding.net/wp-content/uploads/2023/09/AUDI-Q8-4M-1024x512.png 1024w, https://www.vag-coding.net/wp-content/uploads/2023/09/AUDI-Q8-4M-768x384.png 768w, https://www.vag-coding.net/wp-content/uploads/2023/09/AUDI-Q8-4M-600x300.png 600w" sizes="auto, (max-width: 1200px) 100vw, 1200px" /></figure>

<p class="wp-block-paragraph"><strong>Purpose:</strong> Allows you to reprogram or recode all data for the new battery after it has been replaced. <br/><br/><br/><strong>Watch out! There are 4 lines of coding to do here. </strong> <br/><br/><strong>Proceed :</strong> <br/><strong>1</strong> &#8211; Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle&#8217;s diagnostics socket.<br/><br/><strong>2</strong> &#8211; Switch on the ignition and run the VCDS program.<br/><br/><strong>Line 1:</strong><br/><br/><strong>3</strong> &#8211; Click &#8220;<strong>Select</strong>,&#8221; then click &#8220;<strong>19 &#8211; CAN Gateway</strong>.&#8221;<br/><br/><strong>4</strong> &#8211; Click &#8221; <strong>Adaptation &#8211; 10</strong>.&#8221;<br/><br/><strong>5</strong> &#8211; At the very top of this page, there is a drop-down menu.<br/>From this drop-down menu, select &#8220;<strong>Battery Adaptation—Nominal Battery Capacity</strong>.&#8221;<br/><br/><strong>6</strong> &#8211; On this same page, there is a second drop-down menu toward the bottom<br/>.<br/>From this menu, select the rated capacity listed on your battery. For example: &#8220;<strong>70Ah</strong>&#8220;<br/><br/><strong>Line 2:</strong><br/><br/><strong>3</strong> &#8211; Click &#8220;<strong>Select</strong>,&#8221; then click &#8220;<strong>19 &#8211; CAN Gateway</strong>.&#8221;<br/><br/><strong>4</strong> &#8211; Click &#8220;<strong>Adaptation &#8211; 10</strong>.&#8221;<br/><br/><strong>5</strong> &#8211; At the very top of this page, there is a drop-down menu.<br/>From this drop-down menu, select &#8220;<strong>Battery Adaptation—Battery Technology</strong>.&#8221;<br/><br/><strong>6</strong> &#8211; On this same page, there is a second drop-down menu further down<br/>.<br/>From this menu, select the corresponding value<br/>. For example: For the VARTA E39, select &#8220;<strong>Etoffe</strong>&#8221; / &#8220;<strong>Fleece</strong>&#8221; for AGM.<br/><br/><strong>Line 3:</strong><br/><br/><strong>3</strong> &#8211; Click &#8220;<strong>Select</strong>,&#8221; then click &#8220;<strong>19 &#8211; CAN Gateway</strong>.&#8221;<br/><br/><strong>4</strong> &#8211; Click &#8220;<strong>Adaptation &#8211; 10</strong>.&#8221;<br/><br/><strong>5</strong> &#8211; At the very top of this page, there is a drop-down menu.<br/>From this drop-down menu, select &#8220;<strong>Battery Adaptation—Battery Manufacturer</strong>.&#8221;<br/><br/><strong>6</strong> &#8211; On this same page, there is a second drop-down menu further down the page<br/>.<br/>From this menu, select the corresponding brand:<br/>For example: For the VARTA E39, select &#8220;<strong>VAO</strong>.&#8221;<br/><br/><strong>Line 4:</strong><br/><br/><strong>3</strong> &#8211; Click &#8220;<strong>Select</strong>,&#8221; then click &#8220;<strong>19 &#8211; CAN Gateway</strong>.&#8221;<br/><br/><strong>4</strong> &#8211; Click &#8220;<strong>Adaptation &#8211; 10</strong>.&#8221;<br/><br/><strong>5</strong> &#8211; At the very top of this page, there is a drop-down menu.<br/>From this drop-down menu, select &#8220;<strong>Battery Configuration—Battery Serial Number</strong>.&#8221;<br/><br/><strong>6</strong> &#8211; On this same page, there is a second drop-down menu toward the bottom<br/>.<br/>In this menu, enter the corresponding serial number:<br/>Note: Enter only the <strong>last 10 digits</strong> of the serial number.</p>

<p class="wp-block-paragraph"></p>

<hr class="wp-block-separator has-alpha-channel-opacity"/>

<p class="wp-block-paragraph"><strong>Battery Status Detection Features:</strong></p>

<p class="wp-block-paragraph"><br/>The battery status detection in the battery data module calculates the following values, which are transmitted via the LIN bus to the J533 diagnostic data bus interface:<br/>1 “battery not present” detection: if the battery data module does not detect a battery for<br/>more than 30 seconds, a corresponding bit is set to 1<br/>2 voltage that temporarily allows for optimal battery charging<br/>3 “engine start capability” bit. It indicates whether the battery is currently capable of starting<br/>the engine or not<br/>4. The amount of charge that can still be temporarily drawn from the battery before reaching the limit of<br/>its ability to start the engine<br/>5. The battery’s current state of charge<br/>6. Battery aging. Battery aging can be determined using parameters such a<br/>, including the battery’s energy storage capacity and instantaneous power output.<br/>7 battery open-circuit voltage<br/>8 battery internal resistance  </p>

<p class="wp-block-paragraph"><strong>The battery sensor in the J367 battery monitoring control unit:</strong></p>

<p class="wp-block-paragraph">Knowing whether the battery has enough electrical energy to restart the engine is essential for the start-stop system to function properly.<br/>The control module is located directly on the “negative” terminal of the ground wire and is connected to the diagnostic interface via the LIN data bus.</p>

<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="244" height="521" src="https://www.vag-coding.fr/wp-content/uploads/2024/01/charge-batterie.webp" alt="" class="wp-image-16985" srcset="https://www.vag-coding.net/wp-content/uploads/2024/01/charge-batterie.webp 244w, https://www.vag-coding.net/wp-content/uploads/2024/01/charge-batterie-140x300.webp 140w" sizes="auto, (max-width: 244px) 100vw, 244px" /></figure>

<p class="wp-block-paragraph"><strong>Signal Usage:</strong><br/>The battery sensor records the following values:<br/>– Battery temperature<br/>– Battery voltage<br/>– Charging current<br/>The battery temperature is calculated using a lookup table and the ambient temperature.<br/>It also allows for estimates of the battery’s charging time.<br/>Using the data obtained in this way, it is possible to adjust the charging control—particularly the charging voltage—to the battery’s state of charge and operating conditions. The goal is to increase the availability of the start-stop system by optimally utilizing data from the starter battery. </p>

<p class="wp-block-paragraph"><strong>Consequences in the Event of a Malfunction</strong><br/>If the battery sensor is defective, the battery status can no longer be detected correctly.<br/>A fault is logged in the diagnostic interface’s fault memory. The start-stop system is deactivated. </p>

<p class="wp-block-paragraph"><strong>Battery</strong></p>

<p class="wp-block-paragraph">The vehicle’s battery is housed in the engine compartment and protected by a battery tray. The size and type of battery depend on the engine version, equipment, and country-specific variant. Standard batteries, EFB batteries, and AGM batteries are used.<br/>Vehicles with gasoline engines and start/stop systems are equipped with an EFB battery, while vehicles with diesel engines and start/stop systems are equipped with an AGM battery. Vehicles with auxiliary heaters typically have an AGM battery.   </p>

<p class="wp-block-paragraph"><strong>EFB</strong></p>

<p class="wp-block-paragraph">An EFB battery (short for Enhanced Flooded Battery) is a reinforced flooded battery. The positive plate inside the battery is coated with an additional layer of polyester mesh. This provides the battery’s active material with additional support on the plate. These batteries have greater resistance to charge-discharge cycles than standard batteries. During charging, an EFB battery is treated like a standard battery.    </p>

<p class="wp-block-paragraph"><strong>AGM Battery</strong></p>

<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="364" height="384" src="https://www.vag-coding.fr/wp-content/uploads/2024/01/batterie-agm.webp" alt="" class="wp-image-16986" srcset="https://www.vag-coding.net/wp-content/uploads/2024/01/batterie-agm.webp 364w, https://www.vag-coding.net/wp-content/uploads/2024/01/batterie-agm-284x300.webp 284w" sizes="auto, (max-width: 364px) 100vw, 364px" /></figure>

<p class="wp-block-paragraph">In AGM (Absorbent Glass Mat) batteries, the battery electrolyte is retained within a microporous glass mat. An AGM battery is characterized not only by even greater resistance to charge-discharge cycles compared to an EFB battery, but also by its leak-proof design. When charging, follow the charger’s user manual and, if applicable, select the AGM battery program.  </p>

<p class="wp-block-paragraph">In the case of AGM batteries, the automotive battery electrolyte is retained within a microporous glass mat. In addition to<br/>increased resistance to charge-discharge cycles, an AGM battery is characterized by its high level of leak resistance. Sealing is of crucial<br/>importance, particularly when the battery is installed in<br/>the passenger compartment. When charging, follow the charger’s user manual and, if necessary, select the program for<br/>AGM batteries.   </p>

<p class="wp-block-paragraph">Below, we can see the brand, serial number, and manufacturer of the battery</p>

<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="663" height="530" src="https://www.vag-coding.fr/wp-content/uploads/2024/01/batterie.webp" alt="" class="wp-image-16987" srcset="https://www.vag-coding.net/wp-content/uploads/2024/01/batterie.webp 663w, https://www.vag-coding.net/wp-content/uploads/2024/01/batterie-300x240.webp 300w, https://www.vag-coding.net/wp-content/uploads/2024/01/batterie-600x480.webp 600w" sizes="auto, (max-width: 663px) 100vw, 663px" /></figure>
<button class="simplefavorite-button has-count preset" data-postid="47989" data-siteid="1" data-groupid="1" data-favoritecount="0" style="background-color:#4c9fe8;color:#000000;"><i class="sf-icon-love" style=""></i>Love<span class="simplefavorite-button-count" style="">0</span></button><p>L’article <a href="https://www.vag-coding.net/audi/q8-4m/q8-4m-reprogramming-a-new-battery/">Q8 (4M) &#8211; Reprogramming a new battery</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></content:encoded>
					
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">47989</post-id>	</item>
		<item>
		<title>Q8 (4M) &#8211; Activate hidden MMI menu</title>
		<link>https://www.vag-coding.net/audi/q8-4m/q8-4m-activate-hidden-mmi-menu/</link>
		
		<dc:creator><![CDATA[T0MS]]></dc:creator>
		<pubDate>Sat, 28 Dec 2024 18:33:33 +0000</pubDate>
				<category><![CDATA[Q8 (4M)]]></category>
		<category><![CDATA[Hidden Menu]]></category>
		<category><![CDATA[MMI Audi]]></category>
		<guid isPermaLink="false">https://www.vag-coding.fr/audi/q8-4m/q8-4m-activate-hidden-mmi-menu/</guid>

					<description><![CDATA[<p>Purpose: to activate the MMI&#8217;s hidden menu (Hidden Menu / Green Menu / Menu Engineering). Procedure: 1 &#8211; Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle&#8217;s diagnostics socket. 2 &#8211; Switch on the ignition, then run the VCDS program. Line 1: 3&#46;&#46;&#46;</p>
<p>L’article <a href="https://www.vag-coding.net/audi/q8-4m/q8-4m-activate-hidden-mmi-menu/">Q8 (4M) &#8211; Activate hidden MMI menu</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></description>
										<content:encoded><![CDATA[
<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="1200" height="600" src="https://www.vag-coding.fr/wp-content/uploads/2023/09/AUDI-Q8-4M.png" alt="VAG Coding VCDS ODBeleven Audi Q8 4M" class="wp-image-11172" style="object-fit:cover" srcset="https://www.vag-coding.net/wp-content/uploads/2023/09/AUDI-Q8-4M.png 1200w, https://www.vag-coding.net/wp-content/uploads/2023/09/AUDI-Q8-4M-300x150.png 300w, https://www.vag-coding.net/wp-content/uploads/2023/09/AUDI-Q8-4M-1024x512.png 1024w, https://www.vag-coding.net/wp-content/uploads/2023/09/AUDI-Q8-4M-768x384.png 768w, https://www.vag-coding.net/wp-content/uploads/2023/09/AUDI-Q8-4M-600x300.png 600w" sizes="auto, (max-width: 1200px) 100vw, 1200px" /></figure>

<p class="wp-block-paragraph"><strong>Purpose</strong>: to activate the MMI&#8217;s hidden menu (Hidden Menu / Green Menu / Menu Engineering).  </p>

<p class="wp-block-paragraph"></p>

<p class="wp-block-paragraph"><strong>Procedure:</strong> <br/> 1 &#8211; Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle&#8217;s diagnostics socket.<br/><br/> 2 &#8211; Switch on the ignition, then run the VCDS program.<br/><br/><strong>Line 1:</strong><br/><br/> 3 &#8211; Click on &#8221; <strong>Select&#8221;</strong>, then click on &#8221; <strong>Select</strong> &#8220;, then click on &#8221; <strong>Select</strong> &#8220;. <strong>Procedure:</strong> 1 &#8211; Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle&#8217;s diagnostics socket.<strong><strong>5F &#8211; Information Electr.</strong></strong>&#8221; .</p>

<p class="wp-block-paragraph"><strong>4</strong> &#8211; Click on “<strong>Adaptation &#8211; 10</strong>”.</p>

<p class="wp-block-paragraph"><strong>5</strong> &#8211; Select<em><strong>“Developer test</strong> </em> <em><strong>mode</strong> </em><em>” </em>then activate.</p>

<p class="wp-block-paragraph"></p>

<p class="wp-block-paragraph"><em>No need to restart the MMI.</em></p>

<p class="wp-block-paragraph"><em>To open the hidden menu with NAV/MAP (or CAR) and RADIO. First press and hold NAV/MAP (or CAR), then press RADIO and wait 5 seconds. </em>.</p>

<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="1024" height="480" src="https://www.vag-coding.fr/wp-content/uploads/2024/03/A4-Hidden-Menu.png" alt="" class="wp-image-18361" srcset="https://www.vag-coding.net/wp-content/uploads/2024/03/A4-Hidden-Menu.png 1024w, https://www.vag-coding.net/wp-content/uploads/2024/03/A4-Hidden-Menu-300x141.png 300w, https://www.vag-coding.net/wp-content/uploads/2024/03/A4-Hidden-Menu-768x360.png 768w, https://www.vag-coding.net/wp-content/uploads/2024/03/A4-Hidden-Menu-600x281.png 600w" sizes="auto, (max-width: 1024px) 100vw, 1024px" /></figure>

<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="1024" height="480" src="https://www.vag-coding.fr/wp-content/uploads/2024/03/A4-Hidden-Menu2.png" alt="" class="wp-image-18362" srcset="https://www.vag-coding.net/wp-content/uploads/2024/03/A4-Hidden-Menu2.png 1024w, https://www.vag-coding.net/wp-content/uploads/2024/03/A4-Hidden-Menu2-300x141.png 300w, https://www.vag-coding.net/wp-content/uploads/2024/03/A4-Hidden-Menu2-768x360.png 768w, https://www.vag-coding.net/wp-content/uploads/2024/03/A4-Hidden-Menu2-600x281.png 600w" sizes="auto, (max-width: 1024px) 100vw, 1024px" /></figure>

<p class="wp-block-paragraph"><strong><a href="https://www.vag-coding.net/tutorials-information/access-the-audi-red-engineering-menu/" data-type="page" data-id="52070">&#8211;&gt; To access the Audi Red Engineering menu</a></strong></p>
<button class="simplefavorite-button has-count preset" data-postid="48662" data-siteid="1" data-groupid="1" data-favoritecount="0" style="background-color:#4c9fe8;color:#000000;"><i class="sf-icon-love" style=""></i>Love<span class="simplefavorite-button-count" style="">0</span></button><p>L’article <a href="https://www.vag-coding.net/audi/q8-4m/q8-4m-activate-hidden-mmi-menu/">Q8 (4M) &#8211; Activate hidden MMI menu</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></content:encoded>
					
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">48662</post-id>	</item>
		<item>
		<title>Q8 (4M) &#8211; Heated steering wheel settings</title>
		<link>https://www.vag-coding.net/audi/q8-4m/q8-4m-heated-steering-wheel-settings/</link>
		
		<dc:creator><![CDATA[T0MS]]></dc:creator>
		<pubDate>Sat, 28 Dec 2024 14:24:42 +0000</pubDate>
				<category><![CDATA[Q8 (4M)]]></category>
		<category><![CDATA[Heated seats]]></category>
		<guid isPermaLink="false">https://www.vag-coding.fr/audi/q8-4m/q8-4m-heated-steering-wheel-settings/</guid>

					<description><![CDATA[<p>Purpose: Allows you to adjust the temperature of the steering wheel heater, you can increase or decrease the heating level of all or part of the seat by up to 5 degrees Celsius to obtain the optimum temperature setting for you. Proceed : 1 &#8211; Engine off, ignition off, connect your official VAG-COM VCDS cable&#46;&#46;&#46;</p>
<p>L’article <a href="https://www.vag-coding.net/audi/q8-4m/q8-4m-heated-steering-wheel-settings/">Q8 (4M) &#8211; Heated steering wheel settings</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></description>
										<content:encoded><![CDATA[
<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="1200" height="600" src="https://www.vag-coding.fr/wp-content/uploads/2023/09/AUDI-Q8-4M.png" alt="VAG Coding VCDS ODBeleven Audi Q8 4M" class="wp-image-11172" srcset="https://www.vag-coding.net/wp-content/uploads/2023/09/AUDI-Q8-4M.png 1200w, https://www.vag-coding.net/wp-content/uploads/2023/09/AUDI-Q8-4M-300x150.png 300w, https://www.vag-coding.net/wp-content/uploads/2023/09/AUDI-Q8-4M-1024x512.png 1024w, https://www.vag-coding.net/wp-content/uploads/2023/09/AUDI-Q8-4M-768x384.png 768w, https://www.vag-coding.net/wp-content/uploads/2023/09/AUDI-Q8-4M-600x300.png 600w" sizes="auto, (max-width: 1200px) 100vw, 1200px" /></figure>

<p class="wp-block-paragraph"><strong>Purpose:</strong> Allows you to adjust the temperature of the steering wheel heater, you can increase or decrease the heating level of all or part of the seat by up to 5 degrees Celsius to obtain the optimum temperature setting for you.  <br/><br/><br/><strong>Proceed :</strong> <br/><strong>1</strong> &#8211; Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle&#8217;s diagnostics socket.<br/><br/><strong>2</strong> &#8211; Switch on the ignition and run the VCDS program.<br/><br/><strong>Line 1:</strong><br/><br/><strong>3</strong> &#8211; Click on<strong>“Select”</strong> then click on<strong>“16 &#8211; Steering Column Electronics</strong>”.<br/><br/><strong>4</strong> &#8211; Click on<strong>“Adaptation &#8211; 10</strong>”.<br/><br/><strong>5</strong> &#8211; On this page, at the very top, there is a drop-down menu.<br/>In this drop-down menu, choose<strong>“Steering wheel heating Temperature 1</strong>” or<strong>“Chauffage du volant température</strong><strong>1</strong>”.</p>

<p class="wp-block-paragraph">Then temperatures <strong>2</strong> and <strong>3</strong> <em>(Heated flywheel power)</em><br/><br/> 6 &#8211; On this same page, there is a second drop-down menu at the bottom of the page.<br/>On this menu, select the range of values: -5 to +5 (degrees Celsius) relative to the base temperature, then confirm.</p>

<figure class="wp-block-image size-large"><img loading="lazy" decoding="async" width="1024" height="686" src="https://www.vag-coding.fr/wp-content/uploads/2024/12/volantchauffantaudi-1024x686.jpg" alt="" class="wp-image-29109" srcset="https://www.vag-coding.net/wp-content/uploads/2024/12/volantchauffantaudi-1024x686.jpg 1024w, https://www.vag-coding.net/wp-content/uploads/2024/12/volantchauffantaudi-300x201.jpg 300w, https://www.vag-coding.net/wp-content/uploads/2024/12/volantchauffantaudi-768x514.jpg 768w, https://www.vag-coding.net/wp-content/uploads/2024/12/volantchauffantaudi-1536x1028.jpg 1536w, https://www.vag-coding.net/wp-content/uploads/2024/12/volantchauffantaudi-2048x1371.jpg 2048w, https://www.vag-coding.net/wp-content/uploads/2024/12/volantchauffantaudi-600x402.jpg 600w" sizes="auto, (max-width: 1024px) 100vw, 1024px" /></figure>
<button class="simplefavorite-button has-count preset" data-postid="48670" data-siteid="1" data-groupid="1" data-favoritecount="0" style="background-color:#4c9fe8;color:#000000;"><i class="sf-icon-love" style=""></i>Love<span class="simplefavorite-button-count" style="">0</span></button><p>L’article <a href="https://www.vag-coding.net/audi/q8-4m/q8-4m-heated-steering-wheel-settings/">Q8 (4M) &#8211; Heated steering wheel settings</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></content:encoded>
					
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">48670</post-id>	</item>
		<item>
		<title>Q8 (4M) &#8211; ACC distance setting in MMI</title>
		<link>https://www.vag-coding.net/audi/q8-4m/q8-4m-acc-distance-setting-in-mmi/</link>
		
		<dc:creator><![CDATA[T0MS]]></dc:creator>
		<pubDate>Sat, 28 Dec 2024 13:34:46 +0000</pubDate>
				<category><![CDATA[Q8 (4M)]]></category>
		<category><![CDATA[ACC]]></category>
		<category><![CDATA[MMI Audi]]></category>
		<guid isPermaLink="false">https://www.vag-coding.fr/audi/q8-4m/q8-4m-acc-distance-setting-in-mmi/</guid>

					<description><![CDATA[<p>Purpose: Displays the Adaptive Cruise Control (ACC) distance setting on the MMI MIB2. Procedure: 1 &#8211; Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle&#8217;s diagnostics socket. 2 &#8211; Switch on the ignition and run the VCDS program. Line 1 : 3 &#8211;&#46;&#46;&#46;</p>
<p>L’article <a href="https://www.vag-coding.net/audi/q8-4m/q8-4m-acc-distance-setting-in-mmi/">Q8 (4M) &#8211; ACC distance setting in MMI</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></description>
										<content:encoded><![CDATA[
<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="1200" height="600" src="https://www.vag-coding.fr/wp-content/uploads/2023/09/AUDI-Q8-4M.png" alt="VAG Coding VCDS ODBeleven Audi Q8 4M" class="wp-image-11172" srcset="https://www.vag-coding.net/wp-content/uploads/2023/09/AUDI-Q8-4M.png 1200w, https://www.vag-coding.net/wp-content/uploads/2023/09/AUDI-Q8-4M-300x150.png 300w, https://www.vag-coding.net/wp-content/uploads/2023/09/AUDI-Q8-4M-1024x512.png 1024w, https://www.vag-coding.net/wp-content/uploads/2023/09/AUDI-Q8-4M-768x384.png 768w, https://www.vag-coding.net/wp-content/uploads/2023/09/AUDI-Q8-4M-600x300.png 600w" sizes="auto, (max-width: 1200px) 100vw, 1200px" /></figure>

<p class="wp-block-paragraph"><strong>Purpose</strong>: Displays the Adaptive Cruise Control (ACC) distance setting on the MMI MIB2.  </p>

<p class="wp-block-paragraph"></p>

<p class="wp-block-paragraph"><strong>Procedure:</strong> <br/> 1 &#8211; Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle&#8217;s diagnostics socket.<br/><br/> 2 &#8211; Switch on the ignition and run the VCDS program.<br/><br/><strong>Line 1 :</strong></p>

<p class="wp-block-paragraph"><strong>3</strong> &#8211; Click on<strong>&#8220;Select</strong>&#8221; then click on &#8220;.<strong>13 &#8211; Auto Dist. Reg</strong>&#8220;.</p>

<p class="wp-block-paragraph"><strong>4</strong> &#8211; Click on<strong>“Security Access &#8211; 16</strong>” then enter the code<strong>“20103</strong>”.</p>

<p class="wp-block-paragraph"><strong>5</strong> &#8211; Click on<strong>“Adaptation &#8211; 10</strong>”.</p>

<p class="wp-block-paragraph"><strong>6</strong> &#8211; On this page, at the very top, there is a drop-down menu.<br/>In this drop-down menu, choose<strong>“Distance basic setting option</strong>” or <em><strong>“Distance basic setting option”.</strong></em></p>

<p class="wp-block-paragraph"><strong>7</strong> &#8211; On this same page, there is a second drop-down menu at the bottom<br/>of the page.<br/>On this menu, choose<strong>“On”</strong><strong> </strong>then confirm.</p>

<p class="wp-block-paragraph"></p>

<p class="wp-block-paragraph"><em>The MMI needs to be restarted!</em></p>

<p class="wp-block-paragraph"><em>Once the MMI has been restarted, go to Car/Driver Assistance/Audi Adaptive Cruise Control. You should see a new menu called “Basic setting”. Choose this option to set the distance level from 1 to 5 (each representing a “line”). Finally, once the setting has been made, push the ACC rod all the way in (towards the front of the car) so that it is completely deactivated. Replace it. This activates and deactivates ACC, and is necessary to recover the new setting.     </em></p>

<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="1000" height="472" src="https://www.vag-coding.fr/wp-content/uploads/2025/04/reglagesACCaudi.png" alt="" class="wp-image-32668" srcset="https://www.vag-coding.net/wp-content/uploads/2025/04/reglagesACCaudi.png 1000w, https://www.vag-coding.net/wp-content/uploads/2025/04/reglagesACCaudi-300x142.png 300w, https://www.vag-coding.net/wp-content/uploads/2025/04/reglagesACCaudi-768x362.png 768w, https://www.vag-coding.net/wp-content/uploads/2025/04/reglagesACCaudi-600x283.png 600w" sizes="auto, (max-width: 1000px) 100vw, 1000px" /></figure>

<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="910" height="525" src="https://www.vag-coding.fr/wp-content/uploads/2023/09/IMG_7166.jpeg" alt="" class="wp-image-11160" srcset="https://www.vag-coding.net/wp-content/uploads/2023/09/IMG_7166.jpeg 910w, https://www.vag-coding.net/wp-content/uploads/2023/09/IMG_7166-300x173.jpeg 300w, https://www.vag-coding.net/wp-content/uploads/2023/09/IMG_7166-768x443.jpeg 768w, https://www.vag-coding.net/wp-content/uploads/2023/09/IMG_7166-600x346.jpeg 600w" sizes="auto, (max-width: 910px) 100vw, 910px" /></figure>
<button class="simplefavorite-button has-count preset" data-postid="45911" data-siteid="1" data-groupid="1" data-favoritecount="0" style="background-color:#4c9fe8;color:#000000;"><i class="sf-icon-love" style=""></i>Love<span class="simplefavorite-button-count" style="">0</span></button><p>L’article <a href="https://www.vag-coding.net/audi/q8-4m/q8-4m-acc-distance-setting-in-mmi/">Q8 (4M) &#8211; ACC distance setting in MMI</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></content:encoded>
					
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">45911</post-id>	</item>
		<item>
		<title>Q8 (4M) &#8211; Activate a second phone via Bluetooth</title>
		<link>https://www.vag-coding.net/audi/q8-4m/q8-4m-activate-a-second-phone-via-bluetooth/</link>
		
		<dc:creator><![CDATA[T0MS]]></dc:creator>
		<pubDate>Sat, 28 Dec 2024 04:31:40 +0000</pubDate>
				<category><![CDATA[Q8 (4M)]]></category>
		<category><![CDATA[MMI Audi]]></category>
		<guid isPermaLink="false">https://www.vag-coding.fr/audi/q8-4m/q8-4m-activate-a-second-phone-via-bluetooth/</guid>

					<description><![CDATA[<p>Purpose: Allows you to connect two phones simultaneously via Bluetooth to the MMI if you don&#8217;t have the Audi Phone Box option. Procedure: 1 &#8211; Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle&#8217;s diagnostics socket. 2 &#8211; Switch on the ignition and&#46;&#46;&#46;</p>
<p>L’article <a href="https://www.vag-coding.net/audi/q8-4m/q8-4m-activate-a-second-phone-via-bluetooth/">Q8 (4M) &#8211; Activate a second phone via Bluetooth</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></description>
										<content:encoded><![CDATA[
<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="1200" height="600" src="https://www.vag-coding.fr/wp-content/uploads/2023/09/AUDI-Q8-4M.png" alt="VAG Coding VCDS ODBeleven Audi Q8 4M" class="wp-image-11172" srcset="https://www.vag-coding.net/wp-content/uploads/2023/09/AUDI-Q8-4M.png 1200w, https://www.vag-coding.net/wp-content/uploads/2023/09/AUDI-Q8-4M-300x150.png 300w, https://www.vag-coding.net/wp-content/uploads/2023/09/AUDI-Q8-4M-1024x512.png 1024w, https://www.vag-coding.net/wp-content/uploads/2023/09/AUDI-Q8-4M-768x384.png 768w, https://www.vag-coding.net/wp-content/uploads/2023/09/AUDI-Q8-4M-600x300.png 600w" sizes="auto, (max-width: 1200px) 100vw, 1200px" /></figure>

<p class="wp-block-paragraph"><strong>Purpose:</strong> Allows you to connect two phones simultaneously via Bluetooth to the MMI if you don&#8217;t have the Audi Phone Box option. <br/><br/><br/><br/><br/><strong>Procedure:</strong> <br/> 1 &#8211; Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle&#8217;s diagnostics socket.<br/><br/> 2 &#8211; Switch on the ignition and run the VCDS program.<strong>Procedure:</strong> 1 &#8211; Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle&#8217;s diagnostics socket.</p>

<p class="wp-block-paragraph"></p>

<p class="wp-block-paragraph"><strong>Line 1:</strong><br/><br/><strong>3</strong> &#8211; Click on<strong>“Select”</strong> then click on<strong>“5F &#8211; Electr. information</strong>”.<br/><br/><strong>4</strong> &#8211; Click on<strong>“Security Access &#8211; 16</strong>” then enter the code<strong>“20103</strong>”.<br/><br/><strong>5</strong> &#8211; Click on<strong>“Adaptation &#8211; 10</strong>”.<br/><br/><strong>6</strong> &#8211; On this page, at the very top, there is a drop-down menu.<br/>In this drop-down menu, choose “<strong><strong>Vehicle configuration &#8211; Support_second_phone</strong></strong>”<br/><br/><strong>7</strong> &#8211; On this same page, there is a second drop-down menu at the bottom<br/>of the page.<br/>On this menu, select<strong>“active</strong>” and confirm.</p>

<p class="wp-block-paragraph"></p>

<p class="wp-block-paragraph"><em>Restart MMI</em></p>
<button class="simplefavorite-button has-count preset" data-postid="47141" data-siteid="1" data-groupid="1" data-favoritecount="0" style="background-color:#4c9fe8;color:#000000;"><i class="sf-icon-love" style=""></i>Love<span class="simplefavorite-button-count" style="">0</span></button><p>L’article <a href="https://www.vag-coding.net/audi/q8-4m/q8-4m-activate-a-second-phone-via-bluetooth/">Q8 (4M) &#8211; Activate a second phone via Bluetooth</a> est apparu en premier sur <a href="https://www.vag-coding.net">VAG Coding</a>.</p>
]]></content:encoded>
					
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">47141</post-id>	</item>
	<div class="vag-category-tags"><h2 class="vag-category-tags-title">Thèmes des codages – <a href="https://www.vag-coding.net/category/audi/q8-4m/">Q8 (4M)</a></h2><div class="vag-category-tags-list"><a
            class="vag-category-tag"
            href="https://www.vag-coding.net/category/audi/q8-4m/?tag=mmi-audi"
            title="11 codages"
        >MMI Audi</a><a
            class="vag-category-tag"
            href="https://www.vag-coding.net/category/audi/q8-4m/?tag=central-locking"
            title="6 codages"
        >Central Locking</a><a
            class="vag-category-tag"
            href="https://www.vag-coding.net/category/audi/q8-4m/?tag=lighting"
            title="5 codages"
        >Lighting</a><a
            class="vag-category-tag"
            href="https://www.vag-coding.net/category/audi/q8-4m/?tag=virtual-cockpit"
            title="5 codages"
        >Virtual Cockpit</a><a
            class="vag-category-tag"
            href="https://www.vag-coding.net/category/audi/q8-4m/?tag=drl"
            title="3 codages"
        >DRL</a><a
            class="vag-category-tag"
            href="https://www.vag-coding.net/category/audi/q8-4m/?tag=heated-seats"
            title="3 codages"
        >Heated seats</a><a
            class="vag-category-tag"
            href="https://www.vag-coding.net/category/audi/q8-4m/?tag=acc"
            title="2 codages"
        >ACC</a><a
            class="vag-category-tag"
            href="https://www.vag-coding.net/category/audi/q8-4m/?tag=light-assist"
            title="2 codages"
        >Light Assist</a><a
            class="vag-category-tag"
            href="https://www.vag-coding.net/category/audi/q8-4m/?tag=parking-assistance"
            title="2 codages"
        >Parking Assistance</a><a
            class="vag-category-tag"
            href="https://www.vag-coding.net/category/audi/q8-4m/?tag=tailgate"
            title="2 codages"
        >Tailgate</a><a
            class="vag-category-tag"
            href="https://www.vag-coding.net/category/audi/q8-4m/?tag=turn-signals"
            title="2 codages"
        >Turn Signals</a><a
            class="vag-category-tag"
            href="https://www.vag-coding.net/category/audi/q8-4m/?tag=air-conditioning"
            title="1 codages"
        >Air conditioning</a><a
            class="vag-category-tag"
            href="https://www.vag-coding.net/category/audi/q8-4m/?tag=battery"
            title="1 codages"
        >Battery</a><a
            class="vag-category-tag"
            href="https://www.vag-coding.net/category/audi/q8-4m/?tag=belt"
            title="1 codages"
        >Belt</a><a
            class="vag-category-tag"
            href="https://www.vag-coding.net/category/audi/q8-4m/?tag=braking"
            title="1 codages"
        >Braking</a><a
            class="vag-category-tag"
            href="https://www.vag-coding.net/category/audi/q8-4m/?tag=camera"
            title="1 codages"
        >Camera</a><a
            class="vag-category-tag"
            href="https://www.vag-coding.net/category/audi/q8-4m/?tag=carplay-android-auto"
            title="1 codages"
        >CarPlay / Android Auto</a><a
            class="vag-category-tag"
            href="https://www.vag-coding.net/category/audi/q8-4m/?tag=dsg"
            title="1 codages"
        >DSG</a><a
            class="vag-category-tag"
            href="https://www.vag-coding.net/category/audi/q8-4m/?tag=easy-entry"
            title="1 codages"
        >Easy Entry</a><a
            class="vag-category-tag"
            href="https://www.vag-coding.net/category/audi/q8-4m/?tag=engine"
            title="1 codages"
        >Engine</a><a
            class="vag-category-tag"
            href="https://www.vag-coding.net/category/audi/q8-4m/?tag=hidden-menu"
            title="1 codages"
        >Hidden Menu</a><a
            class="vag-category-tag"
            href="https://www.vag-coding.net/category/audi/q8-4m/?tag=instrument"
            title="1 codages"
        >Instrument</a><a
            class="vag-category-tag"
            href="https://www.vag-coding.net/category/audi/q8-4m/?tag=lane-assist"
            title="1 codages"
        >Lane Assist</a><a
            class="vag-category-tag"
            href="https://www.vag-coding.net/category/audi/q8-4m/?tag=lap-timer"
            title="1 codages"
        >Lap Timer</a><a
            class="vag-category-tag"
            href="https://www.vag-coding.net/category/audi/q8-4m/?tag=needle-check"
            title="1 codages"
        >Needle Check</a><a
            class="vag-category-tag"
            href="https://www.vag-coding.net/category/audi/q8-4m/?tag=obdeleven-one-click-apps"
            title="1 codages"
        >OBDeleven One-Click Apps</a><a
            class="vag-category-tag"
            href="https://www.vag-coding.net/category/audi/q8-4m/?tag=remote-control"
            title="1 codages"
        >Remote Control</a><a
            class="vag-category-tag"
            href="https://www.vag-coding.net/category/audi/q8-4m/?tag=retrofit"
            title="1 codages"
        >Retrofit</a><a
            class="vag-category-tag"
            href="https://www.vag-coding.net/category/audi/q8-4m/?tag=start-stop"
            title="1 codages"
        >Start/Stop</a></div><div class="vag-category-tags-back"><a href="https://www.vag-coding.net/category/audi/q8-4m/">← Voir tous les codages – Q8 (4M)</a></div></div></channel>
</rss>
