Purpose : Selects the language used in the on-board computer.

(Modification only possible on Mid/High range models)

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “17 – Instruments”.

4 – Click on “Adaptation – 10”.

5 – Select Channel 04

Change the value according to the desired language

00001 – German
00002 – English
00003 – French
00004 – Italian
00005 – Spanish
00006 – Portuguese / Brazilian

L’article TT (8J) – Change ODB language est apparu en premier sur VAG Coding.

Purpose: to lower the spoiler after the doors have been closed centrally.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition, then run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “46 – Central Conv”. 1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

4 – Click on“Coding – 07” then click on“Long Coding Helper”.

5 – Choose Byte 13:
Bit 7: Uncheck “Rear Spoiler Comfort Lowering via Door Lock active” to deactivate.

L’article TT (8J) – Aileron lowering on locking est apparu en premier sur VAG Coding.

Purpose: to disable spoiler operation. If you code the spoiler deployed or closed, it will be locked in the position after coding! Perfect for mounting a fixed tuning spoiler.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition, then run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “46 – Central Conv”. 1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

4 – Click on“Coding – 07” then click on“Long Coding Helper”.

5 – Choose Byte 10:
Bit 3: Uncheck “Rear Spoiler Installed”.

L’article TT (8J) – Deactivate aileron est apparu en premier sur VAG Coding.

Purpose: to disable spoiler operation. If you code the spoiler deployed or closed, it will be locked in the position after coding! Perfect for mounting a fixed tuning spoiler.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition, then run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “09 – Cent. Elect.”. Switch on the ignition and run the VCDS program.

4 – Click on“Coding – 07” then click on“Long Coding Helper”.

5 – Choose Byte 10:
Bit 3: Uncheck “Rear Spoiler Installed”.

L’article TT (8J) Facelift – Deactivate spoiler est apparu en premier sur VAG Coding.

Purpose: to deactivate automatic spoiler folding when the spoiler has been deployed manually.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition, then run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “46 – Central Conv”. 1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

4 – Click on“Coding – 07” then click on“Long Coding Helper”.

5 – Choose Byte 13:
Bit 6: Uncheck “Rear Spoiler Automatic Lowering after Manual Raising inactive”.

L’article TT (8J) – Deactivate automatic aileron folding est apparu en premier sur VAG Coding.

Purpose: to lower the spoiler after the doors have been closed centrally.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition, then run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “09 – Cent. Elect.”. Switch on the ignition and run the VCDS program.

4 – Click on“Coding – 07” then click on“Long Coding Helper”.

5 – Choose Byte 13:
Bit 7: Uncheck “Rear Spoiler Comfort Lowering via Door Lock active” to deactivate.

L’article TT (8J) Facelift – Spoiler lowered when locked est apparu en premier sur VAG Coding.

Purpose : to adjust the hardness of the power steering for a softer or harder steering wheel.

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select” then click on“44 – Direction assistée” / “44-steering assist.

4 – Click on“Adaptation – 10”.

5 – Select Channel 1 , set a value between 1 and 15 depending on your hardness preference.

Or Line 2: (If channel 1 is unavailable):

3 – Click on“Select” then click on“44 – Direction assistée” / “44-steering assist.”

4– Click on“Coding – 07”.

5 – Select :

• xxx1x for smooth steering
• xxx2x for sports management
• xxx3x for hard steering
• xxx4x for harder steering
• xxx5x for very hard steering

L’article TT (8J) – Modify power steering hardness est apparu en premier sur VAG Coding.

Purpose: to deactivate the worn brake pad warning light on the ODB (on-board computer), e.g. if the brake pad has no sensor or if the sensor has a problem / Brake Pad Warning light desactivation.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition, then run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “17 – Instruments”. 1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

4 – Click on “Coding 07”.

5 – The third and fourth coding digits (xx??x0x) are used to modify Instrument module options. To remove the ice-washer indicator, subtract 1 from these digits.

In the example above, the initial coding (with washer indicator) is: 0023103

To delete the windscreen washer indicator, simply recode as follows: 0022103 (23 – 01 = 22)

L’article TT (8J) – Deactivate brake pad warning light est apparu en premier sur VAG Coding.

Purpose: deactivates the windshield washer indicator on the ODB (on-board computer, for TT phase 1 only).

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition, then run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “17 – Instruments”. 1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

4 – Click on “Coding 07”.

5 – The third and fourth coding digits (xx??x0x) are used to modify Instrument module options. To remove the ice-washer indicator, subtract 4 from these digits.

In the example above, the initial coding (with washer indicator) is: 0025103

To remove the windscreen washer indicator, simply recode as follows: 0021103 (25 – 04 = 21)

L’article TT (8J) – Deactivate windshield washer indicator est apparu en premier sur VAG Coding.

Purpose : to deactivate the windshield washer indicator on the ODB (on-board computer).

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on “Select”, then click on “17 – Instruments”.

4 – Click on “Coding – 07 ”.

5 – Subtract 5 from the last coding digit (00xxxx?)

Example: 0000148 -> 0000143

L’article TT (8J) Facelift – Deactivating the windshield washer indicator est apparu en premier sur VAG Coding.