Purpose: to adjust the volume of the engine sound (Audi Sound System – Soundaktor) inside the car. To mute the sound, use value: 0.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:


3 – Click on ” Select”, then click on “Select”. A9 – Sound terminal structure ” .

4 – Click on “Adaptation – 10”.

6 – Select Channel :“Volume of structure borne noise actuator”.

Select your sound percentage (between 0 and 100)

L’article A7 (C8) – Audi Sound System volume control est apparu en premier sur VAG Coding.

Purpose: to adjust the volume of the engine sound (Audi Sound System – Soundaktor) inside the car. To mute the sound, use value: 0.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:


3 – Click on ” Select”, then click on “Select”. A9 – Sound terminal structure ” .

4 – Click on “Adaptation – 10”.

6 – Select Channel :“Volume of structure borne noise actuator”.

Select your sound percentage (between 0 and 100)

L’article A6 (C8) – Audi Sound System volume control est apparu en premier sur VAG Coding.

Purpose: to adjust the volume of the engine sound (Audi Sound System – Soundaktor) inside the car. To mute the sound, use value: 0.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:


3 – Click on ” Select”, then click on “Select”. A9 – Sound terminal structure ” .

4 – Click on “Adaptation – 10”.

6 – Select Channel :“Volume of structure borne noise actuator”.

Select your sound percentage (between 0 and 100)

L’article A8 (D5) – Audi Sound System volume control est apparu en premier sur VAG Coding.

Purpose: to adjust the volume of the engine sound (Active Sound System – Soundaktor) inside the car. To mute the sound, use value: 0.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:


3 – Click on ” Select “, then click on “Select”. C0 – Aktuator ” .

4 – Click on “Adaptation – 10”.

6 – Select Channel :“Actuator volume for motor noise generation”.

Select your sound percentage (between 0 and 100)

L’article A8 (D4) – Audi Sound System volume control est apparu en premier sur VAG Coding.

Purpose: to adjust/deactivate the volume of the Soundaktor (speaker built into the windscreen bay to simulate a false engine noise). If you hear a squeaking or buzzing sound, or don’t like the noise, deactivate it completely. (Soundaktuator)


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select” then click on “.A9- Struct. Sound terminal“.

4 – Click on“Adaptation – 10”.

5 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Volume of structure-borne noise actuator”

6 – Adapt the value accordingly
Default value: 100%
If the value is set to 0, the sound amplifier is completely disabled.

L’article Touran (2T) – Adjusting the Soundaktor volume est apparu en premier sur VAG Coding.

Purpose: to adjust/deactivate the volume of the Soundaktor (speaker built into the windscreen bay to simulate a false engine noise). If you hear a squeaking or buzzing sound, or don’t like the noise, deactivate it completely. (Soundaktuator)


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select” then click on “.A9- Struct. Sound terminal“.

4 – Click on“Adaptation – 10”.

5 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Volume of structure-borne noise actuator”

6 – Adapt the value accordingly
Default value: 100%
If the value is set to 0, the sound amplifier is completely disabled.

L’article A1 (GB) – Adjust Soundaktor volume est apparu en premier sur VAG Coding.

Purpose: to adjust/deactivate the volume of the Soundaktor (speaker built into the windscreen bay to simulate a false engine noise). If you hear a squeaking or buzzing sound, or don’t like the noise, deactivate it completely. (Soundaktuator)


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select” then click on “.A9- Struct. Sound terminal“.

4 – Click on“Adaptation – 10”.

5 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Volume of structure-borne noise actuator”

6 – Adapt the value accordingly
Default value: 100%
If the value is set to 0, the sound amplifier is completely disabled.

L’article Ibiza (6P) – Adjusting the Soundaktor volume est apparu en premier sur VAG Coding.

Purpose: to adjust the volume of the engine sound (Audi Sound System – Soundaktor) inside the car. To mute the sound, use value: 0.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:


3 – Click on ” Select”, then click on “Select”. A9 – Sound terminal structure ” .

4 – Click on “Adaptation – 10”.

6 – Select Channel :“Volume of structure borne noise actuator”.

Select your sound percentage (between 0 and 100)

L’article Q5 (FY) – Audi Sound System volume control est apparu en premier sur VAG Coding.

Purpose: to adjust/deactivate the volume of the Soundaktor (speaker built into the windscreen bay to simulate a false engine noise). If you hear a squeaking or buzzing sound, or don’t like the noise, deactivate it completely. (Soundaktuator)


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select” then click on “.A9- Struct. Sound terminal“.

4 – Click on“Adaptation – 10”.

5 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Volume of structure-borne noise actuator”

6 – Adapt the value accordingly
Default value: 100%
If the value is set to 0, the sound amplifier is completely disabled.

L’article Arteon (3H) – Adjusting the Soundaktor volume est apparu en premier sur VAG Coding.

Purpose: to adjust/deactivate the volume of the Soundaktor (speaker built into the windscreen bay to simulate a false engine noise). If you hear a squeaking or buzzing sound, or don’t like the noise, deactivate it completely. (Soundaktuator)


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select” then click on “.A9- Struct. Sound terminal“.

4 – Click on“Adaptation – 10”.

5 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Volume of structure-borne noise actuator”

6 – Adapt the value accordingly
Default value: 100%
If the value is set to 0, the sound amplifier is completely disabled.

L’article Q3 (F3) – Adjust Soundaktor volume est apparu en premier sur VAG Coding.